注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • USA
  • Global

Quanum MT系列4012 400KV无刷电机多转子通过内置DYS

Quanum MT系列4012 400KV无刷电机多转子通过内置DYS

QTY:

Now save 保存 AU$ 9.25 AU$ 9.25

Special Price AU$ 25.56 AU$ 25.56

You save 保存 AU$ 9.25 AU$ 9.25

Was  AU$ 34.81

Rating:
Stock:
重量:
266
SKU:
573000058-0

Price War

产品介绍

Quanum MT系列电动机规格由DYS,在行业内众所周知的质量和性能建成。

该MT线采用优质NMB轴承,高杆计数扭矩和平稳运行,所有已在其给定尺寸标准化通用固定件。 Quanum只具备了用N42SH磁铁和0.2毫米叠片最佳效率的电机。该MT还的有充足的电机线长度的切口,以适应安装使用随附的子弹连接器和热缩管。另一大特点是,只具备Quanum所有电机来与各种长度安装硬件,以及两个枢纽和直接安装螺旋桨的选择,所以安装是一个单元。

每个Quanum电机QC检查平衡,风,性能和机械容差。该DYS品牌众所周知的BE系列和新规范建立MT生产线将设置值VS性能的新标准。

特征:
•高功率N42SH磁铁
•精密轴承NMB
•0.2毫米叠片的最佳效率
•充足定尺电机线为一个干净的安装
•直接安装螺旋桨或轮毂样式不兼容
•多长度安装包括硬件

眼镜:
KV(RPM / V):400KV
锂聚合物电池:4-6S
最大功率:350.8W
最大安培:15.8A
空载电流:0.8 / 22.2V
内阻:0.41ohm
极数:14
外形尺寸(Dia.xL):47x31mm
电机轴端:4mm
支撑轴:6毫米CW道具适配器
重量:144克
螺栓孔间距:25x32 M3,M2.5
复合厚度:0.2mm
磁铁:42SH
线材:18AWG
连接器:3.5毫米子弹

Product
Specifications

额外信息

  • 商品编号:
    573000058-0
  • Brand:
    Quanum
  • 重量(g)
    266.00
  • 长度
    95.00
  • 宽:
    50.00
  • 高度:
    70.00
  • 千伏(转/ v)的
    400.00
  • 最大电流( A)
    16.00
  • 功率(W):
    350.00
  • 长度B (毫米):
    31.00
  • 可以长深(mm )
    13.00
  • 最大电压(V)
    22.00
  • 轴(MM):
    4.00
  • Unit Weight (g):
    134
  • 直径C(毫米)
    47.00
  • 总长度E(毫米)
    38.00
  • 电阻( MH):
    0.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I bought a bunch of the Quanum motors convinced by the ads that they would be great.
That will be the last time I buy more than a single sample of a new product from HK, and test that sample thoroughly before ordering any more.
I only awarded one crown because zero was not an option.
I have seen some pretty stupid things over the years, but this one ranks as among the lowest.
The prop adapter is 5 mm.
The motor shaft is 4 mm, and protrudes from the face of the motor a length equal to the thickness of the base of the prop adapter.
That would be OK, except that the clearance hole for the shaft protrusion is drilled-out to 5 mm for a brass liner with 5 mm OD and 4 mm ID.
The result is that the material left at the base of the prop adapter shaft is paper thin and the shaft breaks off when the nose nut is torqued even just a little bit.
The prop adapters are useless.
Even if a few held together when torqued very gently, I would not dare to fly anything with them for fear the prop would break off in flight.
I also have sets of 4108 motors of 475, 580 and 700 KV, and they are all the same.
In total, 19 motors with no usable prop adapters.
Disappointed, frustrated, angry....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
motori di ottima qualita e ben costruiti dei veri mostri, un po poca potenza per le sue dimensioni ma questo giustificato dal fatto che a dei consumi molto bassi! consiglio di usarli a 6s con eliche grandi 14-15
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
  • Quanum MT Series

Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。