该Quanum NEON 250 V2已经升级，较厚的碳纤维板（1.5毫米）给予额外的强度和耐久性。像以前的版本NEON结合了所有你所能想在一个完整的碳赛车外骨骼的必需品，奢侈品和精神错乱。
Overall a cool design, but lots of little pieces and no instructions. Thankfully it's been out a while and there are some build guides online. 5 for value because these were on special for ~$11AUD so i bought two and overcame the issues with the sturdiness of the frame by stacking two of each base plate.i bought 2 of these and they are awesome, i used black widows 2500kv motors w/ 6030 props for the first one, and flipped the second one and added luminier angled motor mounts with 2205 2350kv motors and 30 amp raptor esc's and oh... my... god... I love this setup.3 stars down the line, but never have I wished harder I could give a frame more starts. The design engineering behind this Flying Robot frame is outstanding (not really a quanum frame). However someone in the chain of commands opted for very thin 1.5mm carbon fiber, and very weak standoffs that strip easily making it impossible to tighten the necessary components. As a result two things happen very easily after a few crashes. 1) the frame becomes loose, and 2) the CF breaks.
Sollution - buy two frames, and double up everything. You will need to buy longer screws, and if you go with something like m2x8mm or even m2x10mm they will go much deeper into the standoffs and make it harder to strip them, but replacing the standoffs is still ideal. So for $16 plus shipping gets you up to about $25 most places, you will have a great frame. But as it is currently it is a frame that will break before almost every other fpv frame out there.