创业框架具有大多数组件都附加中心晶石。该ESC挂载/配电板已预先安装20A非洲ESC的过滤FPV电源线。它还处理中心线电池安装。多安装FC位置和电源模块的支持可以处理你的FC和远程UBEC / USB模块的选择。横臂允许在管布线和电机坐骑不仅好看，而且保护了包括2213多星型发动机，并有可更换/可选降落滑行选项。前臂房子安装一个保护中心摄像机安装的立方体，可以处理30毫米小FPV相机隔振垫。下成型的一体式机身外壳附着在武器和晶石，具有普遍万向固定和高大的打滑作为一个选项条款。下壳还具有一个刚性顶部横倾杆/ GPS挂载，FPV发射器的安装立方体。上壳真空成型聚碳酸酯在体重和力量的平衡，并赋予很好地定制。接入端口已经进行了所有类型的齿轮所以维修是一个单元。
DJI / HK PILOT / CC3D / Naze32 / KK飞行控制器
Acquired one of the ARF version of this model, never ventured out of the fixed wing brigade before being an old boy of 75 found it a bit testing doing the software for the FC the Kingkong micro CC3D in Libre Pilot but successfuly set it all up and flys really well, have now ordered another one to experiment with have KK2 1.5 FC with OSD to access the screen will mount the lipo underneath the bottom and fix the flight controller where the lipo would normally fit under the removerble front cover, have Futaba 7c on first model but have Hitec Aurora 9 thinking of using this on next model any advice would be welcomeThis thing was poorly assembled, had a binding motor issue untill finally the shaft retaining clip popped off causing the top half.of the motor to fly off and send the venture crashing 200ft to the ground .
1Love this model, have all three versions and cant find fault with hem other than the lack of spares available. have also recommended the deluxe model to my father and brother-in-law and they have both bought them and are extremely happy, for the price the supplied equipment is fantastic, especially the deluxe model with includes the naza and the fatshark.Einfach nur Klasse dieser Copter. Fliege ihn mit KK2.1.5 Board und Multistar 5200mAh LiPo. Habe viel Spa mit diesem Modell.Fast Shipping, great lightweight frame, ready for everthing you might add! :)esteticamente per me il pi bel telaio. unica pecca che non ha moltissimo spazio all'interno se volete farlo ipertecnologico. la naza mv2 ci entra a fatica . per il resto sono soddisfatto.It's a dud! This thing is too heavy and too underpowered to even get off the ground! Photos of it flying must have been Photoshopped!A beautiful model with a futuristic look , made with quality materials my version is arf bought about two weeks ago I just have to assemble the flight controller and the receiver , just made will test the model.i receive this morning at 13,00 pm the package was in good condition i open it and ceck the items and the quad was right.perfect i when i assembly the remain items and thest the quad write other reviewIf you buy one of the pre-assembled ones, CHECK all the connection that the company makes. I bought one with a power system (so all I needed was the battery, controller and receiver. Flew it about 4 times, then suddenly for no reason, it fell out of the sky and busted two motor mounts. I thought there may have been some chance that I shut the stick off on accident. Bought a New frame kit $45 (just for the new motor mounts), replaced the motor mounts. Took it out for a flight again, Same thing happened this time blowing two motor mounts AND 3 props. This time the problem was identified, Where the two ferrite beads were supposed to be soldiered in, one end of each of the bead was NEVER soldiered. Only reason I found out, they actually pulled away from the board, and the etching where there should have been some soldier - there was none, it was clean. CHECK THE WORKMANSHIP or you'll be buying parts due to their shoddy work.