注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global
  • USA

赛32赛车飞行控制器F303(豪华)

赛32赛车飞行控制器F303(豪华)

QTY:

Now save 保存 AU$ 9.75 AU$ 9.75

Special Price AU$ 32.49 AU$ 32.49

You save 保存 AU$ 9.75 AU$ 9.75

Was  AU$ 42.24

Rating:
Stock:
重量:
48
SKU:
387000090-0

Price War

产品介绍

第一次碰到这两个性能和价格,现在只等你拿格子旗终点线!该Race32飞行控制器已经发展了四车手在那里重量轻全功能飞行控制器可以给你你需要的边缘。

与Cleanflight完全兼容赛32 FC拥有所有最新的主板,包括梦幻般的STM32 F3处理器的主要特点。更快的ARM-的Cortex M4内核具有高效的飞行计算和循环次浮点硬件单元是快两倍,上一代STM2 F1板。

装得满满的特点是Race32是严重的四/多转子试点的明智选择飞行控制器。

特征:
•混合插件的设置,JST插头并通过针连接孔。在端口上没有妥协。全功能支持所有模块,都在同一时间。
•保护套
•堆叠式设计 - 完美的与OSD及配电板集成
•黑匣子飞行日志记录
•下一代STM32 F3处理器具有更快的ARM架构的Cortex M4内核浮点硬件单元。
•位于电路板的同一侧插头
•4个PWM 3针通孔连接器,用于胚胎干细胞,伺服系统。对于ONESHOT ESC的全力支持
•支持系统总线,SumH,SumD,二千○四十八分之一千○二十四的Spektrum,XBUS,PPM,PWM接收机。
•内置逆变器
•专用输出可编程LED灯
•电池监控端口,端口蜂鸣器
•PWR电压和电流的端口
•精密低空位置保持声纳支持
•安装在主板的底部,便于风隔离晴雨表
•通过跨平台GUI的飞行控制器的配置(Windows / OSX / Linux的)
•支持固定翼,tricopters,四轴飞行器,hexacopters,octocopters等等。

眼镜:
外形尺寸:36×36毫米板30.5毫米安装孔
重量:5克
CPU:STM32F303与FPU 256K闪存
陀螺仪:MPU6050
晴雨表:MS5611
磁力计:HMC5983
端口:UART1 / OSD,UART2 / GPS,UART3 /串行RX,I2C

Product
Specifications

额外信息

  • 商品编号:
    387000090-0
  • Brand:
    N/A
  • 重量(g)
    48.00
  • 长度
    120.00
  • 宽:
    16.00
  • 高度:
    80.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
A good one if you have to build with the small white connectors
Quality
Value
Overall
Quality
Value
Overall
Relly nice flightcontroller. Couldn't see the magnetometer until I flashed new firmware in cleanflight. Flashed firmware SPRACINGF3 with manual baudrate of 115200. Needed to unplug and plug the board again before I was able to flash it otherwise I got an error similar to "unble to communicate with bootloader" not sure why... Other than that it is a very complete board. Good value for the money.
Quality
Value
Overall
Quality
Value
Overall
Really nice flight controller from Holybro. Lots of options and a lots of cables. Read somewhere that in order to use voltage monitoring, it needs to use another board from the same brand, which makes sense, since voltage and amp monitoring have it's own plug. But I'm using a LiPo voltage checker on my quad so, no issues there. The order of the ESCs was reversed, so I had to desolder and solder them again. Again, not a huge deal (I used the pins, not the plug). What kept me scratching my head for a while was that, in PWM, the radio channels order was all messed up. Had to remap the channels in cleanflight using this command in CLI: map AE34TR12 > save. Except these minor issues, this is actually a great board! I would buy it again definitely! This board has an F3 processor (Naze32 is F1), lots of memory for blackbox and is blazing fast! Running it at 250 looptime (4KHz) with no issues. ESC passthrough programming works just fine.
Quality
Value
Overall
Quality
Value
Overall
Realy nice board with many possibilities only channel mapping was a bit difficult i need TA12ER23 to get it working under cleanflight 1.12
and to flash the firmeware u need a manual baud rate from 115200
Quality
Value
Overall
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。