红色铝合金轮毂适配器与锁螺钉 - 5毫米
These hubs are great for my Tamiya TA01! With a fully ball-raced setup i didn't want any resistance and these little things worked perfectly! no issues for me so far! :-)it fits on my car grateThese are nice and cheap, and probably a good upgrade over the plastic hexes that come with a lot of lower end kits, but the precision is a bit poor. Of the 4, only one actually gripped the axle when the set screw is fully tightened. The other 3 are tightened all the way, and will still pull off the axle easily. They will work, since the wheel nut will hold them on, but they would be much nicer if they fit tight like they should.
Overall, though, they work and are about half what they cost elsewhere, so I'll probably buy them again when I need more.Very good but the screws are not so good, but very usefull and really cheap.La calidad era la esperada, cumplen de sobra.Realy good quality. Fit perfect. Also great to create any own drive or to make changes cars of the 80ies.They look great, but precision is terrible. one of adapters does not fit into a pin, so I needed to shave an edge. Another accept screw well, so I tightened it well, but an adapter came off with wheel when I took it off.