注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册

RMILEC TS4047 10CH 2.5W UHF模块系统瓦特/接收器(JR模块)

RMILEC TS4047 10CH 2.5W UHF模块系统瓦特/接收器(JR模块)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
264
SKU:
362000001
产品介绍

该RMILEC TS4047 10CH 2.5W UHF模块系统提供了一系列的终极您FPV模型。它可与任何JR风格模块发射机使用。该软件包包括TS4047 UHF发射模块,RD4047P UHF 10CH接收器和所有必要的硬件。

包括在框:
TS4047发射模块(JR风格)
RD4047P 10CH接收器
发射模块天线
天线架
所有必要的硬件/引线


TS4047模块规格:

硬件频率范围:400MHz到470MHz的
频率稳定度: 百万分之二点五
输出低通滤波器:
-带1
频率范围:415Mhz-445Mhz
步骤频率:480Khz
通道:70
-带2
频率范围:433.05MHz -434.79MHz
步骤频率:30KHZ
通道:70
低输出功率:30DB -31dB峰(0.9W-1.2W)
高输出功率:33分贝-34dB峰(1.9W-2.5W)
低利率:@ 40Hz的10Kbps之
高速率:66Hz @ 15Kbps
RF接口阻抗:50欧姆
电源电压:8.4V至16V
电池反接保护:
逻辑电压:3-12V
当前:
330毫安/520毫安(@ 50欧姆负载,12V电源电压)
250毫安/440毫安(@空载,12V电源电压)
950毫安/ 1.6A(@RF短路,12V电源电压)
温度:50至70摄氏度


RD4047P接收器规格:
频率范围:400MHz到470MHz的
灵敏度 :
-112 DBM @ 0.1EBR(40Hz的刷新率)(10Kbps之低速率)
-111 DBM @ 0.1EBR(50Hz的刷新率)
-110 DBM @ 0.1EBR(66Hz刷新率)(15Kbps率高)
-108 DBM @ 0.1EBR(90Hz的刷新率)
-104 DBM @ 0.1EBR(125Hz的刷新率)
-104 DBM @ 0.1EBR(166Hz刷新率)
-101 DBM @ 0.1EBR(250Hz的刷新率)
F / S,条件依次为:> 0.99EBR
天线增益:2.15DBM
-低速率模式
刷新频率:40Hz的
跳频速率:40Hz的
跳频周期:13HZ
恢复时间:77mS
-高速率模式
刷新频率:66Hz
跳频速率:66Hz
跳频周期:22Hz
恢复时间:45mS
响应时间:4毫秒到25mS的
PWM输出精度:0.5us内一步ERROR <20PPM
PWM输出范围:0.5毫秒,2.5ms的
PWM输出周期:55Hz的@Normal模式/ 192Hz @Fast模式
PPM输出精度:0.5us内一步ERROR <20PPM
PPM输出范围:0.5毫秒,2.5ms的每个通道
PPM输出循环:
@ 50Hz的正常模式和1毫秒2毫秒输出
在42Hz为50Hz @Normal模式和为0.5ms到2.5ms的输出
50Hz至83Hz @Fast模式与1毫秒2毫秒输出
在42Hz到125Hz的@Fast模式及0.5ms的为2.5ms的
PPM同步脉冲宽度:
4毫秒到16毫秒自动调整@Normal模式/ 4毫秒不变@Fast模式
RSSI输出范围:0〜3.3V(RF信号弱<0.8V)
推荐电源电压:3.5V至8.4V
关机电压:3 V
伤害电压:> 15V
反向击穿电压:> -15V
输出端口耐压:> 12V
正常电流:<60毫安
工作温度:-40至+ 80°C
低频电源噪声滤波器: 包括
高频噪声滤波器: 包括


Product
Specifications

额外信息

  • 商品编号:
    362000001
  • Brand:
    N/A
  • 容量(mAh)
  • 重量(g)
    264.00
  • 长度:
    235.00
  • 宽:
    53.00
  • 高度
    140.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I really recommend this product, for me have work great, I had flown for more than 15kms away with 70-80pcnt RSSI. Don't listen what the other people say about this product, much of them haven't even used. 100pcnt recommendable.
IMPORTANT: there is many information and very useful upgrades in the internet, in the rcgroups RMILEC thread, like dipole antennas and other things, do it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
el tinc fa 6mesos i cap problema, fuciona molt be. cap pega a part del manual que no l'entenc gaire. pero lo basic funciona be. ficat amb una turnigy .9xr. un video de 1,2mhz i un raptor. cap perdua de senyal i cap problema.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The nicest part about the RMILEC system is how nice the module fits in the JR radio. The system is also very easy to set up & bind. I have about 15 medium range flights on this system with no problems. I tested system with a spectrum analyzer & I found the 2nd harmonics to be in the 1.2 ghz range & it was very strong. Even with filters I would be afraid to use 1.2 ghz for video. The other thing that disapointed me was the freq. hopping was much less impressive than described! I tested 3 times with analyzer & it would only hop to 3 different channels. In short, very affordable system but I would steer clear of urban areas & don't use 1.2 or 1.3 ghz vid tx with this system. Overall good value if used properly! I also got 4 miles on ground radio range test.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hi guys!
I bought one 4 months ago and i am very happy with it!The only problem is that the module overheats and that is making me nervous.I found a sale in ebay with an aftermarket aluminum backplate i order one i put it on and now it runs cool!
Very satisfied!
Here is the ebay link

http://www.ebay.com/itm/251248653104?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
absolutely brilliant for the price. I have been 2.2km away from "launch" with this system controlling my Bixler 2, see my video in the videos section of this listing.

No glitches, no lockouts and it was a breeze to bind and re-bind. setting fail safe was trail and error but a bit of googleing sorted me out. Could do with having the fail safe procedure in the manual.

all in all, great bit of kit, and this JR version fits into my Turnigy 9x with no modifications whatsoever.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Alguien sabe, como se configura el F/S ???
En el manual no pone nada.
El TX, tiene tres interruptores,tampoco pone nada en el manual, alguien sabe algo.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Muito bom recomendo. Funciona muito bem com radio turnigy 9x
s precisa tirar a antena de 2.4. facil de bindar e com bastante alcance.
Ja voei a 4km sem ruidos. O f/S funciona muito bem mas no pode esquecer de habilitar a chave no modulo.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This system works very well. I have a couple of pointers for anyone wanting to try it. 1) Always keep the rx antennas at 90 degress to each other, one vertical and one horizontal. 2)Keep the tx antenna vertical 3) dont sit too close to your video reciever with the tx as it will affect the video quality 4)Bind the rx with all equipment switched on vtx etc.



Good sytem and good price - nice one !
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Everyone is going to be disappointed when they find out that you can't use all ten channels without a ppm encoder board. You only have 8 usable channels as it comes from HK. Come on HK do your homework first. Where is the manual?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This team of RX, TX is realmetne sensancional, I've flown over 4 km and only 20 meters from the ground and never any problems, I have it mounted on Turnigy 9x with fantastic software ER9x.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。