New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

韩国空军T-5070毫米EDF喷气机(KIT)

韩国空军T-5070毫米EDF喷气机(KIT)

Discontinued Product

Please continue searching for a similar product.
SKU:
T-50 KIT Gold
WANT FREE SHIPPING? Click here to find out more!

你要找的东西在foamie EDF有什么不同?那么韩国空军T-50喷气70毫米是给你的!完成了韩国空军的力量共和国的配色方案非常注重细节的韩国空军T-50有几个把戏它的袖子。缩放详细舱机动,可以使用你的发射机的备用通道打开或关闭!所包含的收回系统还具有完全关闭,一旦缩回都存放功能的门。所有的控制电路和硬件都包含了雨棚,这个套件缩回。

所包含的70毫米EDF单元需要28尺寸EDF电机周围2650kv,建议一家4S 2200mAh的锂聚合物。武器的选择也包括在套件,让您自定义射流的外观。你也将需要五个9克舵机一个45Amp或更大的ESC和你自己的6声道发射器和接收器(TX / RX)

规范:
翼展:820毫米
长度:1050毫米
重量:1200克
电机:28尺寸EDF无刷2650kv(必填)
EDF单位:70毫米
ESC:45A(必填)
电池:14.8V 2200mAh的4S前列(必填)
电池盒:120×33 x32mm(MAX)
伺服:5×9克(必填)

需要:
ESC:45A
伺服:5×9克
您的TX和RX(6通道最小)
14.8V 2200mAh的4S脂Lipoh电池

  • SKU T-50 KIT Gold
  • Brand -
  • 容量(mAh) -
  • 重量 2366.0000
  • 长度 950.00
  • 230.00
  • 高度 300.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

You vil need a, servo revers for one of the elevator servos.

And the motor in the combo recomendation(Turnegi 2226) does not fit the fan as it is 29mm and the fan is for 28mm!!

The plane it self looks nice, but seems a bit on the havy side for this fan!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

You vil need a, servo revers for one of the elevator servos.

And the motor in the combo recomendation(Turnegi 2226) does not fit the fan as it is 29mm and the fan is for 28mm!!

The plane it self looks nice, but seems a bit on the havy side for this fan!

Tested the fan unit. I use the recommended HK2839EDF Outrunner 2800 kV and 4 cell 2.200 mAh Turnigy 20-30C. I held the fan in my hand which is not ideal since when pressing the fan housing it becomes oval and the fan blades touch the wall. But anyhow, balance on fan blade unit was better than most plastic fans I have and power is fantastic. Could hardly hold it at 400 Watt which was not max speed. So I am sure this fan set up is more than sufficient and will rocket the plane. The fan is fitted to the 4 mm motor shaft with a collet chuck and it fits very well.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Tested the fan unit. I use the recommended HK2839EDF Outrunner 2800 kV and 4 cell 2.200 mAh Turnigy 20-30C. I held the fan in my hand which is not ideal since when pressing the fan housing it becomes oval and the fan blades touch the wall. But anyhow, balance on fan blade unit was better than most plastic fans I have and power is fantastic. Could hardly hold it at 400 Watt which was not max speed. So I am sure this fan set up is more than sufficient and will rocket the plane. The fan is fitted to the 4 mm motor shaft with a collet chuck and it fits very well.

Just received the plane and it is truly fantastic. Very beautiful. Manual of course stinks so it took some time to figure out how to activate the servos so you can open up the canopy. There is an external battery connector at the underside of the body. You need to connect this and then plug in the servo leads to a servo tester. Channel 6 is for the retracts and channel 5 is for the canopy. The retracts and canopy servos are great - only these items are woth the price of the whole plane. A really fantastic low price. Can't wait to put it together and do the maiden flight. And by the way, fan seems to be of good quality but haven't tested it yet. Hope the blade has OK balance. But this plane can also fit the EPF fan sold here. I may use this instead. Will let you know.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just received the plane and it is truly fantastic. Very beautiful. Manual of course stinks so it took some time to figure out how to activate the servos so you can open up the canopy. There is an external battery connector at the underside of the body. You need to connect this and then plug in the servo leads to a servo tester. Channel 6 is for the retracts and channel 5 is for the canopy. The retracts and canopy servos are great - only these items are woth the price of the whole plane. A really fantastic low price. Can't wait to put it together and do the maiden flight. And by the way, fan seems to be of good quality but haven't tested it yet. Hope the blade has OK balance. But this plane can also fit the EPF fan sold here. I may use this instead. Will let you know.

I purchased this item from a company here is Oz. This one will come from the same manufacturer and I have to say it's fantastic. The guy complaining about the wing loading is wrong. At 1/4 throttle it just floats. I have the Black / Gold version which I'm sure they will bring out soon. The F-35 pilots are the perfect size. Worm gear retracts work perfect. Also, the canopy opens and closes so you can put the battery in it. C of G is recommended at 74-76mm from the start of the leading edge of the wing. When the Black one arrives I'll buy one from here just for spares. The price is great too. They cost around $300-350 Oz. Definately something a bit different to have at your field

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I purchased this item from a company here is Oz. This one will come from the same manufacturer and I have to say it's fantastic. The guy complaining about the wing loading is wrong. At 1/4 throttle it just floats. I have the Black / Gold version which I'm sure they will bring out soon. The F-35 pilots are the perfect size. Worm gear retracts work perfect. Also, the canopy opens and closes so you can put the battery in it. C of G is recommended at 74-76mm from the start of the leading edge of the wing. When the Black one arrives I'll buy one from here just for spares. The price is great too. They cost around $300-350 Oz. Definately something a bit different to have at your field

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save