注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • USA

RotorBits TriCopter套件采用模块化装配系统(KIT)

RotorBits TriCopter套件采用模块化装配系统(KIT)

QTY:

Now save 保存 AU$ 33.87 AU$ 33.87

Special Price AU$ 6.26 AU$ 6.26

You save 保存 AU$ 33.87 AU$ 33.87

Was  AU$ 40.13

Rating:
Stock:
重量:
630
SKU:
171000412-0

Price War

esc
battery
servo
motor
acc
产品介绍

仅仅因为你可能已经超出你的积木和竖套并不意味着乐趣必须停止。介绍RotorBits,模块化建设一套无限的可能性。基于标准化的连接和尺寸的想法,什么可以建立唯一的限制就是你的想象力。

该RotorBits三直升机是RotorBits模块化部件的一个巧妙的改编,创造在地爱和伟大的飞行三直升机独特的简单化服食。一个在三直升机使用的独特位,是齿轮啮合的倾斜机制。倾斜机制采用以前复杂的电机倾斜组件,并简化了下来,只留下两个齿轮和伺服。模块化倾斜单元可以直接滑倒到任何RotorBits 10mm轴。色彩鲜艳的TRI中心板已45x45mm集成为飞行控制器和适应等配件及各种比特规定安装柱。着陆橇有一个拉链领带分离设计和登月器圆润的杯脚对地飞掠乐趣。简单化的模块化理念使装配一个单元,带来乐趣回到有时超过复杂的想法。

RotorBits组件可以多个项目之间的互换,使您可以混合和匹配你的心脏的内容!当你的位集合的增长和概念的发展,你会发现,可能性是无止境的。谁知道你会想出下! RotorBits是可以永远不会过时,只有重新配置的想法。

特征:
•模块化滑在一起的结构
•耐用的玻璃填充尼龙和碳组成部分
•重量轻
•适应性强,可重复使用的RotorBits件
•齿轮驱动倾转旋翼

眼镜:
身高:155毫米
重量:258克
轴距或大小:555毫米

包括RotorBits:
3×碳梁
3×着陆脚
3×支腿
1个三中心安装
2×DST电机安装
1个倾斜伺服电机安装
1个袋子,扣件和拉链领带

需要:
3×DST-1200kv或类似的电机
3×20A多旋翼飞行器的胚胎干细胞
1个9克伺服
3×10寸的道具2顺时针逆时针1
1个飞行控制器
1个1500〜2200mAh的3S 11.1V电池lipoly
1个5通道无线电系统

Product
Specifications

额外信息

  • 商品编号:
    171000412-0
  • Brand:
  • 重量(g)
    630.00
  • 长度
    330.00
  • 宽:
    120.00
  • 高度:
    180.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
cumple con mi expectativas. se ve fabricado con muy buena calidad y muy ligero.
deberia llevar los taladros del carbono hechos.
Quality
Value
Overall
Quality
Value
Overall
Surprisingly heavy and there is a lot of slop in the servo connection. Most of the slop can be removed by gluing the components together though. Quite enjoying it so far.
Quality
Value
Overall
Quality
Value
Overall
The RotorBits Tricopter is simple yet elegant and easy to put together! It's like Lego for big kids and can easily be assembled with little knowledge in the area. I love the colour scheme and it is easily orientated in the air. The landing gear is sturdy and the zip-ties hold together really well. My only criticism (and the reason I gave the quality one less star) is because I had do some rectification the servo-tilt section and the gears. The servo they recommended/showed in the picture did not fit in the servo bay and the nylon gear was far too small for the gear teeth and it was hard to fix. I ended up super-gluing it and it managed. HobbyKing perhaps release a new version? Other than that I love it. And it is great value for money!
Quality
Value
Overall
Quality
Value
Overall
Brilliant bit of kit. Got me started and in the air nicely. very please. servo mount is a bit rubbish. but works extreeeemly well for the price.
Quality
Value
Overall
Quality
Value
Overall
Got one of these in the mail today... Very robust and well designed kit.
Decided to order another one to build for night flying with some led light strips.
Pretty easy to put together.. I used the KK2.1 control board and setting it up was a breeze..
I assigned the autolevel to my landing gear switch so I could easily switch back and forth for acrobatic modes.
I used plush 18 amp esc.. DT 700 kv bell motors and an orange spektrum compatible receiver with satellite Corna 929 metal gear 9 gram servo for the yaw.
10x4.5 slowfly props (2 CW and 1 CCW) and get an easy ten minutes with 2200 mah Turnigy batteries.
I give it a hearty two thumbs up.. (ps.. I didn't use the screws and bolts per directions
I simply drilled a pilot hole and tapped it for the screws on one side.
Built a battery tray with 1.5 glass plate cut 1.25 x 7" and suspended it from the bottom with wire ties.
Quality
Value
Overall
Quality
Value
Overall
I have two rotorbits tricopters and they are excellent very tough. I would highly recommend them
great for general fun flying and they fly great with the KK2 and recommended motors. Thanks Hobbyling for a great bargain.
Quality
Value
Overall
Quality
Value
Overall
Please do not overlook this frame kit !! I have built and crashed more multirotor kits then I care to admit to. This is the best kit I ever built. The first time that everything fit to a perfect match and ended up being one of the strongest one I have. Very Perice fitting of all components . May be a bit heavy . I love it !!!!
Quality
Value
Overall
Quality
Value
Overall
Received my kit today. A bit disappointed as the carbon fiber rods that come with it don't have holes , so you have to either buy the jig set for it or drill the holes very carefull.

The kit is very neat and nice .It Seems to be strong enough to handle some crashes. But this I will find out soon.

Quality
Value
Overall
Quality
Value
Overall
Awesome kit. My first multirotor and I was impressed with its quality. My only gripe was the servo mechanism. The recommend led servos do not fit without alot of fiddling around. Otherwise im happy with it.
Quality
Value
Overall
Quality
Value
Overall
This was my first multi-rotor kit so i can't compare it to anything but i will say this i am happy with this kit. It was simple to put together and using the recommended electronics except for using my own servo it flies great . Very stable using the KK 2.1HC. The reason for 4 stars are because it did require some modification to the servo mounting area for my servo to fit properly as well as having play in the back area where the rear motor is mounted on. This was fixed using super glue :) Great product!!! Thanks Hobbyking!!!
Quality
Value
Overall
View all reviews
Upload
Videos
  • RotorBits TriCopter Kit With Modular Assembly System

Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

esc
battery
servo
motor
acc

产品标签

使用空格分隔标签。使用单引号(')标注词组。