New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

RotorStar无刷外转子直升机 - 2839-3600kv(450大小的直升机)

RotorStar无刷外转子直升机 - 2839-3600kv(450大小的直升机)

Shipped From:
  • Global
QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 32.84
状态:
Backorder
SKU:
9192000157-0
ETA:
No ETA At This Time [ ? ]
WANT FREE SHIPPING? Click here to find out more!

RotorStar系列 无刷 电机提供的高性能的直升机模型绝对最好的质量,性能和价值。每RotorStar电机彻底检查和测试,确保满足3D直升机飞行员的需求所需的高效率和顶级的性能。
 
RotorStar系列电机是高品质 无刷   外转子 小号专门为今天的高性能型号直升机使用而设计的。
 
我们指示工程师今日源提供给他们最好的品质磁铁,轴承和材料,并制定马达,它不仅对手,但超越了许多领先的汽车制造商的质量在市场上。
 
其结果是一个高效率,高素质的电机采用优质双屏蔽轴承,烧结钕磁铁和一个字符串绕定子确保准确和一致的线圈每一次。
 
该RotorStar电机适合谁正在寻求 毫不妥协 一个高质量的 无刷 电机直升机 建模


*完美的HK450 / Trex公司450/450的Rave /光束E4 /刀片450或任何其他450大小的直升机。



眼镜。
打开:10T
电压:3S Lipoly
RPM / V:3600kv
电机极数:6
内阻:0.019欧姆
最大负荷:50A
最大功率:610W
轴直径:3.175毫米
轴长度:15.7毫米
螺丝安装间距:16毫米(M3x4)
重量:79克
电机插头:φ3.5mm子弹连接器

  • SKU 9192000157-0
  • Brand RotorStar
  • 重量 136.0000
  • 长度 110.00
  • Packaging Width 45.00
  • 高度 80.00
  • 千伏(转/ v)的 3600.00
  • 最大电流( A) 50.00
  • 电阻( MH) 0.00
  • 最大电压(V) 11.00
  • 功率(W) 610.00
  • 轴(MM) 3.18
  • 长度B (毫米) 39.00
  • 直径C(毫米) 28.00
  • 可以长深(mm ) 24.00
  • 总长度E(毫米) 54.00
  • RotorStar Brushless Outrunner Helicopter - 2839-3600kv

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Estoy decepcionado con este motor. He probado varias configuraciones y distintos esc., diferentes piñones y no consigo darle fuerza. Ni de lejos da tantos wats. como se especifica aquí. He tenido que probar con Turnigy HeliDrive SK3 Competition Series - 2839-4300kv y de momento éste si que tiene poder, con piñón de 10t y 3s-2200mah. verdadera potencia durante 4 minutos. También NTM Rotor Drive 450 Series 3400KV / 500W tiene mucha potencia con piñón 13t., aunque después de un golpe no funciona bien.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Estoy decepcionado con este motor. He probado varias configuraciones y distintos esc., diferentes piñones y no consigo darle fuerza. Ni de lejos da tantos wats. como se especifica aquí. He tenido que probar con Turnigy HeliDrive SK3 Competition Series - 2839-4300kv y de momento éste si que tiene poder, con piñón de 10t y 3s-2200mah. verdadera potencia durante 4 minutos. También NTM Rotor Drive 450 Series 3400KV / 500W tiene mucha potencia con piñón 13t., aunque después de un golpe no funciona bien.

This motor with a 35A ESC and 3s 2400mah Bolt LiHV is a killer setup for any 450! Ridiculous power and 10 min flight times. I use it on a KDS450.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This motor with a 35A ESC and 3s 2400mah Bolt LiHV is a killer setup for any 450! Ridiculous power and 10 min flight times. I use it on a KDS450.

Ok so I have this motor for about a year now and maybe around 4-500 flights on it.
I have run for most of the time with 18* timing but I recently changed to 24* timing and the motor had a nice bump in performance. Higher power and head speed.
It runs great, I highly recomend it for any t-rex 450 size helicopter

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ok so I have this motor for about a year now and maybe around 4-500 flights on it.
I have run for most of the time with 18* timing but I recently changed to 24* timing and the motor had a nice bump in performance. Higher power and head speed.
It runs great, I highly recomend it for any t-rex 450 size helicopter

Seems to lack power but this could be due to esc timing and slightly low head speed, 2600rpm. Problem, went into a full power vertical climb and the motor cut with no chance of saving heli. Found HK hard one pinion broken, whether this occured due to crash or it caused the drive failure (did not hear any motor noise when heli fell out of the sky) who knows. Put old motor back in fornow.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Seems to lack power but this could be due to esc timing and slightly low head speed, 2600rpm. Problem, went into a full power vertical climb and the motor cut with no chance of saving heli. Found HK hard one pinion broken, whether this occured due to crash or it caused the drive failure (did not hear any motor noise when heli fell out of the sky) who knows. Put old motor back in fornow.

It`s great motor. I have over 60 flights with it on my HK-450. Each flight takes about 6 minutes with soft 3D so it`s economical and has lots of power to.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It`s great motor. I have over 60 flights with it on my HK-450. Each flight takes about 6 minutes with soft 3D so it`s economical and has lots of power to.

Nice little motor for my 450 heli project. The gold stands out, it's a great finish. Rotorstar products are very interesting.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice little motor for my 450 heli project. The gold stands out, it's a great finish. Rotorstar products are very interesting.

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save