New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

AAI RQ-7影子FPV2000毫米激光切割工具

AAI RQ-7影子FPV2000毫米激光切割工具

Discontinued Product

Please continue searching for a similar product.
SKU:
9099000065-0
WANT FREE SHIPPING? Click here to find out more!

在现实生活中,AAI RQ-7影子是澳大利亚,意大利,瑞典,美国和其他国家的军队用来提供侦察,监视战场无人机作为目标采集平台。

超过500个RQ-7影子在世界各地携带电光/红外成像传感器和具有射程超过100公里,4小时的目标游荡时操作使用。规范还要求该无人机能在运动场降落。

我们的RQ-7影子不能提供4小时的持续时间或100公里的范围内,但它肯定是一个梦幻般的FPV平台,所有的全尺寸的高度实用的功能,包括空气动力学证明倒V尾,双繁荣的布局,中心安装的推进电机,固定起落架三轮车和巨大的中央机舱给你的摄像头和传感器明确的说法。

对于我们之间的规模爱好者套件构建成完整大小的阴影相当准确地表述,并在2000毫米翼展大规模爱好者不会dissappointed要么这个人是非常接近1/2的规模!

该套件配有全套组件,从最高的质量轻和层级激光切割,使建设为快速,准确和愉快。一个完整的附件包,让你用粘合剂和覆盖材料以完成模型来提供。

特征:
•能够高度FPV平台
•精确的激光切割件
•质量轻木和胶合板建筑
•全附件包
•易于遵循说明书
•大的有效载荷能力
•包括起落架

眼镜:
翼展:2000毫米
长度:1630毫米
飞行重量:3200〜4000克
收音机:4通道最低
电机:2820 900-1100KV无刷外转子
ESC:60A
螺旋桨:12×6

需要:
4通道RC齿轮(最小)
2×17克舵机
2个标准舵机
5000-10000mAh 4S LiPoly电池
2820 900-1100KV无刷电机
60A ESC W / BEC
覆盖
粘合剂
FPV的首选设备(选配)

  • SKU 9099000065-0
  • Brand Other
  • 重量 3971.0000
  • 长度 880.00
  • Packaging Width 180.00
  • 高度 340.00
  • IC / 2 : ELEC -
  • Motorsize (直径或 - cc)的 -
  • 翼展(毫米) 2000.00
  • Length(mm) -
  • SaleWeight (G) -
  • 容量(mAh) -

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Don't get me wrong I'm having fun building the RQ-7, but there are problems with the model.

the mounting points for the landing gear are drilled in the wrong place, and the hole in the wheels are too small to fit the shafts, they have to be drilled out.
some parts need the tabs modifying because they not match the holes in the appropriate panels ( B13 & B14 where they fit into A2 if any one cares)
and other panels aren't big enough so you need to buy a little bit of extra sheet. finally i was missing some of the balsa wood strips for the wings

Sorry if thats all a bit negative they are relatively small things and i got all the extra balsa i needed for less that 10.

the plus point which is a huge one is that the body of the model has a massive easily accessible bay for mounting FPV cameras and gimbals and theres a cut out near the nose that can be easily modified to house a downwards viewing camera for mapping.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Don't get me wrong I'm having fun building the RQ-7, but there are problems with the model.

the mounting points for the landing gear are drilled in the wrong place, and the hole in the wheels are too small to fit the shafts, they have to be drilled out.
some parts need the tabs modifying because they not match the holes in the appropriate panels ( B13 & B14 where they fit into A2 if any one cares)
and other panels aren't big enough so you need to buy a little bit of extra sheet. finally i was missing some of the balsa wood strips for the wings

Sorry if thats all a bit negative they are relatively small things and i got all the extra balsa i needed for less that 10.

the plus point which is a huge one is that the body of the model has a massive easily accessible bay for mounting FPV cameras and gimbals and theres a cut out near the nose that can be easily modified to house a downwards viewing camera for mapping.

Very nice kit. 3 days for shipping from NL to FR. Parts are ready to be glur, just need a sharp knife. think about have 4m of 3mm x 3mm and 4m of 6mm x 6mm paulownia wood to complete this kit. Some hole wasn't at the good place but its very easy to correct that. perform a test before use glue, especialy for the landing gear D3 parts and for the tail tube in wing (parts D2, D4 and A12). After assembly, dry weight is above 1400gr. I will use glow .46 engine, I think its the better way for handsome look and nice flight time.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice kit. 3 days for shipping from NL to FR. Parts are ready to be glur, just need a sharp knife. think about have 4m of 3mm x 3mm and 4m of 6mm x 6mm paulownia wood to complete this kit. Some hole wasn't at the good place but its very easy to correct that. perform a test before use glue, especialy for the landing gear D3 parts and for the tail tube in wing (parts D2, D4 and A12). After assembly, dry weight is above 1400gr. I will use glow .46 engine, I think its the better way for handsome look and nice flight time.

I love that I'm building this massive model for just over $100 dollars. I'm most of the way done building the fuselage and it's been a lot of fun so far. I don't know if I'll add electronics and try to fly it yet, I really wanted to try building a balsa model.

There is one big flaw however; the quality control at least on my model was not very good. Many of the balsa pieces are not laser cut through all the way so I'm having to trace the back of the balsa on the laser cut lines with an xacto knife to get them apart. Some pieces are so bad however that I can't even see the lines on the back, and the wood doesn't break cleanly if I try to snap the pieces. This is making getting some of the parts out extremely tedious. Most of the parts however are fine, this issue is just with a couple of sheets of parts which does translate into a lot of extra work.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I love that I'm building this massive model for just over $100 dollars. I'm most of the way done building the fuselage and it's been a lot of fun so far. I don't know if I'll add electronics and try to fly it yet, I really wanted to try building a balsa model.

There is one big flaw however; the quality control at least on my model was not very good. Many of the balsa pieces are not laser cut through all the way so I'm having to trace the back of the balsa on the laser cut lines with an xacto knife to get them apart. Some pieces are so bad however that I can't even see the lines on the back, and the wood doesn't break cleanly if I try to snap the pieces. This is making getting some of the parts out extremely tedious. Most of the parts however are fine, this issue is just with a couple of sheets of parts which does translate into a lot of extra work.

Manual Download [2356]
AAI RQ-7 Shadow Manual Download [2356]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save