New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

S500 FR4玻璃纤维四轴飞行器480毫米PNF组合

S500 FR4玻璃纤维四轴飞行器480毫米PNF组合

Discontinued Product

Please continue searching for a similar product.
重量:
1720
SKU:
426000014-0
WANT FREE SHIPPING? Click here to find out more!

S500 FR4玻璃纤维四轴飞行器480毫米PNF组合

在S500组合套件是基于我们非常受欢迎,稳定和轻量级框架S500。该钻机是专为最佳的飞行,并让你走出车间和到空气中更快。对于公园的飞行,FPV和拍摄项目,在一个简单的完美的设置放在一起包。

在S500框架本身自带2个蓝色和2个白色的武器在空中更好的方向。该上翘武器给帧略有二面角这有助于使其非常稳定,从高空下降时尤其如此。不仅对上翘臂的设计作出一个稳定飞行平台,但也包括通过中心使之成为一个非常坚实帧的碳纤维杆。

所包含的起落架提供了足够的空间供一个摄像头万向附加到内置的拉杆式的摄像机安装。这个系统有一个可锁定的滑动安装可以移动时,照相机和摄像机万向节被安装到调节重心。

构建不能有任何容易,带预螺纹套管在了怀里,框架只是螺丝在一起,干净和简单。博尔特在顺时针和逆时针2212多星型马达,9443自紧螺旋桨。附带的分布织机是一个XT60男性连接到4双的3.5mm插头用于连接电机的一个简单的即插即用体验。包括在织机是JST公插头可以用于连接电源到视频发送器,照相机平衡环或LED照明系统。

雷霆超级QQ飞行控制器联系该组合中的所有组成一个简单的即插即用方式。超级稳定的飞行性能是通过内置的3轴陀螺仪和3轴加速度传感器的自稳定功能来实现的。

所有这些组件使这个组合简单,稳定和轻松自由的即插即用体验,让你在空中飞舞。

产品特点
•多星15A胚胎干细胞
•S500帧从品质玻璃纤维和聚酰胺尼龙建
•包括最佳行走机构,没有猜测工作需要
•超级稳定的飞行

眼镜:
身高:170毫米
重量:425克(仅帧)
轴距:480毫米
汽车: 多星2212 920Kv
螺旋桨:9443自紧CC&CCW(2台)
ESC: 多星15A
飞行控制器: 迅雷超级QQ


包括:
1个S500框架套件与硬件
4个多星15A ESC
4×2212电机和道具设置CW和CCW(包括备用螺旋桨集)
1个配电织机XT60 JST和3.5mm插头
电机安装1个硬件
1个带电池
1个迅雷超级QQ飞行控制器
1×电压报警
14×绿色扎带
1×手册框架和飞行控制器

要求
最低4通道无线电和接收器(6CH推荐使用FPV)
FPV齿轮(可选)
万向摄像头(可选)
2200〜3000mAh的3S LiPoly电池
Lipoly电池充电器

  • SKU 426000014-0
  • Brand -
  • 容量(mAh) -
  • 重量(g) 1720.00
  • 长度 360.00
  • 90.00
  • 高度 190.00
  • S500 FR4 Glass Fiber Quad Copter 480mm PNF Combo
  • s500

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Make sure that you have identified the turning directions of motors before fixing because, we cannot connect any propeller to any motor. Screwing directions are fixed.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Make sure that you have identified the turning directions of motors before fixing because, we cannot connect any propeller to any motor. Screwing directions are fixed.

You can't beat this for the money.
I've been on RC aircraft for many years, but this is my first quad. Great value, went together in an hour or so and setup was maybe another 20 minutes. Then in the air.
Only problem I had was the legs don't take any side stress. I guess the first time I calibrated the controller, it didn't take. I started to take off and it went sideways a little and 2 legs broke. Re-calibrated and all was fine. Anyone got a link to a new set of legs?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

You can't beat this for the money.
I've been on RC aircraft for many years, but this is my first quad. Great value, went together in an hour or so and setup was maybe another 20 minutes. Then in the air.
Only problem I had was the legs don't take any side stress. I guess the first time I calibrated the controller, it didn't take. I started to take off and it went sideways a little and 2 legs broke. Re-calibrated and all was fine. Anyone got a link to a new set of legs?

The Thunder QQ Super Flight Controller is garbage and I will be replacing mine.

The auto leveling feature has one big major flaw that caused my S500 FR4 Glass Fiber Quad Copterto crash twice, which ruined two arms and four legs.

The auto level will always fight the end user when trying to turn. For example, when fly my quad forward the auto level will try to level it out after 4 seconds. As soon as that happens you can't go forward any more, but as soon as you try to bring it back the auto level gets confused and the quad loses control.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The Thunder QQ Super Flight Controller is garbage and I will be replacing mine.

The auto leveling feature has one big major flaw that caused my S500 FR4 Glass Fiber Quad Copterto crash twice, which ruined two arms and four legs.

The auto level will always fight the end user when trying to turn. For example, when fly my quad forward the auto level will try to level it out after 4 seconds. As soon as that happens you can't go forward any more, but as soon as you try to bring it back the auto level gets confused and the quad loses control.

Simply the best to learn multicopter

need two hours to build and make the first flight fron scrach

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Simply the best to learn multicopter

need two hours to build and make the first flight fron scrach

I had to have some help me get my right stick (controller) to work. He had to program the speed controls all four and calibrate sensor to get direction control to work. I had the throttle working but each motor wouldn't work equally. You really need to read the instruction for flight control step by step. They should have more video's to help people when buying a product.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I had to have some help me get my right stick (controller) to work. He had to program the speed controls all four and calibrate sensor to get direction control to work. I had the throttle working but each motor wouldn't work equally. You really need to read the instruction for flight control step by step. They should have more video's to help people when buying a product.

great product, as the vid said, as a first hobby grade quad. shame my radio changed a few channels around during my test flight which lead me to crash :( over all a great product and I would recommend to anyone :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great product, as the vid said, as a first hobby grade quad. shame my radio changed a few channels around during my test flight which lead me to crash :( over all a great product and I would recommend to anyone :)

an easy build. the flight board was defective. fortunately i had a spare thunder qq which worked. tried using the frysky but it didn't work. it worked with the turnigy 9x receiver. had some nice stable flights. the flight board started to not function. while it was working it flew well. i may have gotten some lemon flight controllers. impressive stable performance when it was working.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

an easy build. the flight board was defective. fortunately i had a spare thunder qq which worked. tried using the frysky but it didn't work. it worked with the turnigy 9x receiver. had some nice stable flights. the flight board started to not function. while it was working it flew well. i may have gotten some lemon flight controllers. impressive stable performance when it was working.

Awesome kit for the price! Overall it's a really nice quad. As others have noted the legs are garbage. I broke all four when I was doing the setup. Barely even landed hard. The instructions were pretty poor for hooking up the electronics so I added a comment in the discussion section of this page to help others get setup correctly. My main issue was putting the motors in the right spot. I had them flipped. I highly recommend buying extra props, legs (other then those included), and control arms NOW! I should've. I broke two props and the legs during setup and another prop and control arm on a hard wipe out. Now I have to wait another week before I can get flying again. I am using the HK6S Tx/Rx and it works well although it took me awhile to figure out trim buttons. Overall I had a ton of fun putting it together and look forward to flying it more when the new parts come in.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Awesome kit for the price! Overall it's a really nice quad. As others have noted the legs are garbage. I broke all four when I was doing the setup. Barely even landed hard. The instructions were pretty poor for hooking up the electronics so I added a comment in the discussion section of this page to help others get setup correctly. My main issue was putting the motors in the right spot. I had them flipped. I highly recommend buying extra props, legs (other then those included), and control arms NOW! I should've. I broke two props and the legs during setup and another prop and control arm on a hard wipe out. Now I have to wait another week before I can get flying again. I am using the HK6S Tx/Rx and it works well although it took me awhile to figure out trim buttons. Overall I had a ton of fun putting it together and look forward to flying it more when the new parts come in.

Nice quad, but props are not good, flyable, but thats all. I don'y use the QQ controller. I use a Pixhawk and a FrSky L9R and Taranis, all bought at Hobbyking.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice quad, but props are not good, flyable, but thats all. I don'y use the QQ controller. I use a Pixhawk and a FrSky L9R and Taranis, all bought at Hobbyking.

Overall a very good quadcopter. I have mine paired with the APM OSD Kit with 915Mhz radios, and a 5200mAh Multistar / Turnigy battery. I have several flights in and can testify that this quad is indeed super stable right out of the box. My only suggestion would be to get a set of 10 x 3.8 DJI style / Multistar (straight, not S-type) carbon fiber props if you want good performance.

If you want to add a brushless gimbal, be sure to stick with a small platform like the Turnigy Action Camera, Mobius, etc.. This quad copter will not lift a medium sized gimbal and camera like the Quanum Mid-Sized gimbal and mid-sized action cameras. Those are better suited for the S550 Hexacopter.

Very easy to assemble, all parts marked clearly, decent instructions, good support through HobbyKing's Daily videos for the S500 quadcopter combo. Very satisfied with my purchase. Thank you HobbyKing!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Overall a very good quadcopter. I have mine paired with the APM OSD Kit with 915Mhz radios, and a 5200mAh Multistar / Turnigy battery. I have several flights in and can testify that this quad is indeed super stable right out of the box. My only suggestion would be to get a set of 10 x 3.8 DJI style / Multistar (straight, not S-type) carbon fiber props if you want good performance.

If you want to add a brushless gimbal, be sure to stick with a small platform like the Turnigy Action Camera, Mobius, etc.. This quad copter will not lift a medium sized gimbal and camera like the Quanum Mid-Sized gimbal and mid-sized action cameras. Those are better suited for the S550 Hexacopter.

Very easy to assemble, all parts marked clearly, decent instructions, good support through HobbyKing's Daily videos for the S500 quadcopter combo. Very satisfied with my purchase. Thank you HobbyKing!!!

  1. 1
  2. 2
  3. 3
S500 Without Legs Download [2079]
Wiring connector orientation Download [2107]
s500 pnf parts list Download [2481]
S500 COMBO MANUAL Download [2036]
qq and props manual Download [2003]
operations instructions Download [2293]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save