New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

SE.5A规模WWI Warbird(55.4in)

SE.5A规模WWI Warbird(55.4in)

Discontinued Product

Please continue searching for a similar product.
重量:
4440
SKU:
SE.5A
WANT FREE SHIPPING? Click here to find out more!

被许多人是其时英国最好的单座战斗机认为,该SE.5a设计并在英国皇家飞机制造厂建在范堡罗打击“福克洪水猛兽”。该SE.5a是继任者SE.5体育更强大的220hp的发动机,是由几名盟军王牌,包括阿尔伯特球VC飞行。

这建立了轻和胶合板SE.5a覆盖有品质覆膜和规模的细节,包括规模轮子和操纵线完成。所有的硬件​​,包括让空气中的模型包括320cc油箱,焕发发动机悬置,EP电机安装和所有控制棒,牛角,U形夹螺母,螺栓和。

眼镜:
翼展:1408毫米(55.4in)
长度:1118毫米(44in)
重量:2300克
机翼面积:46.83dm2

EP设置:
电机:42XX 700kv无刷先驱者
ESC:60A
电池:3S〜4S 3300mAh的Lipoly
舵机:4标准尺寸舵机
电台: 您自己的Tx / Rx

发光设置:
发动机:0.40〜0.46夜光
舵机:4标准尺寸舵机
电池: 电池RX
电台: 您自己的Tx / Rx
油箱:320cc(包括)

  • SKU SE.5A
  • Brand -
  • 容量(mAh) -
  • 重量(g) 4440.00
  • 长度 920.00
  • 230.00
  • 高度 300.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Very nice flying model, the covering is VERY thin and care is needed when building. Keep as much of the running gear as far forward as possible. I got away with a 4 cell 2450 with a small piece of lead and it balanced nicely. Shame the manufactures did not take the time to make it look more scale, I lowered the undercarriage and reduced the wing spacing and it looks a little better.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice flying model, the covering is VERY thin and care is needed when building. Keep as much of the running gear as far forward as possible. I got away with a 4 cell 2450 with a small piece of lead and it balanced nicely. Shame the manufactures did not take the time to make it look more scale, I lowered the undercarriage and reduced the wing spacing and it looks a little better.

Star to assembling it today, nice finish and a lot of parts, but something is not there.
Missing the two taps in front of the lower wing, to fit in to the fuselage, have to make them myself.
Missing the parts that fasten the servos into the wing, have to make them also, and there are now screws to secure the servo hatch to the wing esay fix, but.

Anyone have tips too and pilot, and battery. Using this engine http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=18122
ESC 70 amp, and have 14 x 10, and 12 x 8 wooden propellers.
Think I need 4 cells, but what size

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Star to assembling it today, nice finish and a lot of parts, but something is not there.
Missing the two taps in front of the lower wing, to fit in to the fuselage, have to make them myself.
Missing the parts that fasten the servos into the wing, have to make them also, and there are now screws to secure the servo hatch to the wing esay fix, but.

Anyone have tips too and pilot, and battery. Using this engine http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=18122
ESC 70 amp, and have 14 x 10, and 12 x 8 wooden propellers.
Think I need 4 cells, but what size

I would like to give this kit a 4 stars overall rating due the quality of the materials and pre-construction of the plane. The plane kit came very well built where everything fit well together and straight. The coverings are nice and tight and no surface wrinkles that are worth pointing out. However, some hardware pieces are missing and will cause the build time to increase. For example, the wheel collar nuts are too small to fit over the wheel axle. The internal of the supplied collar nuts are 3/16 (.18mm) but should be 7/32 (.21mm). There are also other missing screws and nuts that are needed to attach the wing struts to the fuselage and the top and bottom wings together.

Also, the front center piece of the bottom wing has two holes that are 5/16 (.31mm) in diameter but there are no wood dowels to be used for them. If the wooden dowels are provided, they would go between the wing and the fuselage to keep the wings tight and in place while in flight.

Other than that, the kit is very good quality and the price is just awesome for a plane this size and pre-constructed.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I would like to give this kit a 4 stars overall rating due the quality of the materials and pre-construction of the plane. The plane kit came very well built where everything fit well together and straight. The coverings are nice and tight and no surface wrinkles that are worth pointing out. However, some hardware pieces are missing and will cause the build time to increase. For example, the wheel collar nuts are too small to fit over the wheel axle. The internal of the supplied collar nuts are 3/16 (.18mm) but should be 7/32 (.21mm). There are also other missing screws and nuts that are needed to attach the wing struts to the fuselage and the top and bottom wings together.

Also, the front center piece of the bottom wing has two holes that are 5/16 (.31mm) in diameter but there are no wood dowels to be used for them. If the wooden dowels are provided, they would go between the wing and the fuselage to keep the wings tight and in place while in flight.

Other than that, the kit is very good quality and the price is just awesome for a plane this size and pre-constructed.

This is a very good flyer.I think the asp 61 fsis the ideal engine. That plane fly very well and the landings are very smooth

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a very good flyer.I think the asp 61 fsis the ideal engine. That plane fly very well and the landings are very smooth

very good value for the price with some minor corrections required to ensure good performance;
CG is not 70 mm from LE as indicated in the manual but 105 mm !
This means that with 4 stroke engines of 0.60 or larger tail ballast is required even when installing a 1300 mah Lipo aft in the cockpit. With a 0.46 2-stroke most probably no ballast in case the heavy steel control rods are replaced by carbon.
The wing covering had no overlap at the TE therefore provide overlap strips, same colour covering material is available.
My model flies well at 70-80pcnt throttle using an 30 year old OS 61 FS, more power is only extra weight.
Rolls are rather slow even with full ailerons.
Apply contact glue to the rubber tyres and the wheels otherwise they come loose during landing.
Provide some balsa wing skids at the bottom wing aft edges using contact glue

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very good value for the price with some minor corrections required to ensure good performance;
CG is not 70 mm from LE as indicated in the manual but 105 mm !
This means that with 4 stroke engines of 0.60 or larger tail ballast is required even when installing a 1300 mah Lipo aft in the cockpit. With a 0.46 2-stroke most probably no ballast in case the heavy steel control rods are replaced by carbon.
The wing covering had no overlap at the TE therefore provide overlap strips, same colour covering material is available.
My model flies well at 70-80pcnt throttle using an 30 year old OS 61 FS, more power is only extra weight.
Rolls are rather slow even with full ailerons.
Apply contact glue to the rubber tyres and the wheels otherwise they come loose during landing.
Provide some balsa wing skids at the bottom wing aft edges using contact glue

Aspect du kit trs classique.

L'entoilage est revoir entirement : en particulier les extrmits qui sont trs mal colles : en particulier une des 4 ailes se dfait compltement : a tombe bien, c'est celle qui avait 2 nervures de fendues :-(

Il faut prvoir de bien rsiner l'avant (si on choisi une option glow).

La construction est bien allge sur l'arrire, mais ce n'est pas de la dentelle ; a tombe bien, le bras de levier avant est trs court ; mais les empennages ne semblent pas trs lgers.

Il y a l'emplacement des servos sur 2 des 4 ailes (ailes infrieures).

Les ailes sont en 3 parties : il y a donc 4 clefs d'ailes coller !

Bien sur, il n'y a pas de notice :-(

Ce kit vaudrait 3 toiles si je ne l'avais pas pay si peu cher (env 100$)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Aspect du kit trs classique.

L'entoilage est revoir entirement : en particulier les extrmits qui sont trs mal colles : en particulier une des 4 ailes se dfait compltement : a tombe bien, c'est celle qui avait 2 nervures de fendues :-(

Il faut prvoir de bien rsiner l'avant (si on choisi une option glow).

La construction est bien allge sur l'arrire, mais ce n'est pas de la dentelle ; a tombe bien, le bras de levier avant est trs court ; mais les empennages ne semblent pas trs lgers.

Il y a l'emplacement des servos sur 2 des 4 ailes (ailes infrieures).

Les ailes sont en 3 parties : il y a donc 4 clefs d'ailes coller !

Bien sur, il n'y a pas de notice :-(

Ce kit vaudrait 3 toiles si je ne l'avais pas pay si peu cher (env 100$)

This has to be about the best value plane that can be bought. It looks great, is well made and the parts fit together very nicely. However it is not for first time builders. The instruction book is a shocker and I had hardware left over that I had no idea what it was in there for and other small parts like bolts missing. Some of the cables didnt fit etc but I have an extensive range of parts and tools so no problems. All in all a brilliant plane for the money. I fitted a 4stroke 52ASP and it balanced out fine so will be interesting to see if the power is sufficient.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This has to be about the best value plane that can be bought. It looks great, is well made and the parts fit together very nicely. However it is not for first time builders. The instruction book is a shocker and I had hardware left over that I had no idea what it was in there for and other small parts like bolts missing. Some of the cables didnt fit etc but I have an extensive range of parts and tools so no problems. All in all a brilliant plane for the money. I fitted a 4stroke 52ASP and it balanced out fine so will be interesting to see if the power is sufficient.

Hallo zusammen,

ich habe das Manual verlegt. Kann mir bitte jemand kurz schreiben, wo der liegt.
I built the SE5A but Ive lost the Manual. Kann someone please tell me the CG.

Thanks

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hallo zusammen,

ich habe das Manual verlegt. Kann mir bitte jemand kurz schreiben, wo der liegt.
I built the SE5A but Ive lost the Manual. Kann someone please tell me the CG.

Thanks

Very nice ARF, some knowledge of ARF building is required. kit is very nice... spent most of my build time scaling.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice ARF, some knowledge of ARF building is required. kit is very nice... spent most of my build time scaling.

This is one dam good plane for the price $99.99 very well made. the only mod I made was to the tail, I used a bit of wire for a tail skid and strengthen the whole thing. Power comes from a 4248 motor 1200watts, 70Amp HK speedcontroller, 16" prop and 6cells battery.
My setup the plane takes off less than half throttle. I have found this one very easy to fly and looks fantasic and big in the air well worth getting you will not be disappointed.


verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is one dam good plane for the price $99.99 very well made. the only mod I made was to the tail, I used a bit of wire for a tail skid and strengthen the whole thing. Power comes from a 4248 motor 1200watts, 70Amp HK speedcontroller, 16" prop and 6cells battery.
My setup the plane takes off less than half throttle. I have found this one very easy to fly and looks fantasic and big in the air well worth getting you will not be disappointed.


  1. 1
  2. 2
  3. 3
No File Name Download [49]
SE5a-2 Download [151]
No File Name Download [39]
se5a Download [39]
No File Name Download [199]
SE5A1 Download [225]
SE5A2 Download [200]
SE5A2 Download [202]
SE5A3 Download [190]
SE5A4 Download [179]
  1. 1
  2. 2
  3. 3
  4. 4

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save