注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册

SK LIGHTNING 480四直升机帧(包)

SK LIGHTNING 480四直升机帧(包)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
931
SKU:
426000039-0

esc
battery
motor
acc
产品介绍

SK LIGHTNING 480四直升机帧(包)

对SK闪电是一个稳定的四边形作为相机平台来使用。它配备了坚固,轻便,玻璃纤维武器和框架。这一切都在一个480毫米轴距大尺寸的框架。在带有一个集成的配电板,让您的布线整齐。包括在此是一个5V 3A BEC加上内置XT60电池连接器。

这是一个容易与具有所有主要部件预螺纹套管,以帮助装配和调整建设框架。没有寻找在地板上的那些自锁螺母。为了帮助在白天和夜间有LED条方向每条腿以帮助您在正确的方向前进。

玻璃纤维臂配有16,19日和25毫米电机孔,这将允许您运行10到12英寸的螺旋桨。向上倾斜的武器帮助给予极大的稳定平台。可调整的电池和相机万向支架可以让您完全调整重量分布。不同平衡环可容易地安装到框架。

在合适的价格一个很好的通用框架。只适合你的装备,你会被你的拍摄轻松下一个戏。

特征:
•从品质玻璃纤维和聚酰胺尼龙内置
•预螺纹铜管袖子所有的帧螺栓
•上翘的武器稳定
•每个臂定位超高亮发光二极管
•您胚胎干细胞直接焊接集成的PCB连接
•易于装配
•内置XT60电池输入

眼镜:
轴距:480毫米
身高:190毫米
重量:510克(包括BEC和照明系统)
BEC输入电压:8〜28V
BEC输出:5V 3A
电机安装螺栓孔:16〜19〜25毫米

包括:
1个SK闪电480架套件
1个手册

需要:
4×80028毫米1000KV〜电机
4×20〜30A的速度控制器
4×10-12inch螺旋桨
1个2200mAh的3S 11.1V到LiPoly电池或以上
1个飞行控制器
5〜6声道广播接收器
相机和万向节(可选)

Product
Specifications

额外信息

  • 商品编号:
    426000039-0
  • Brand:
    N/A
  • 重量(g)
    931.00
  • 长度
    285.00
  • 宽:
    55.00
  • 高度:
    200.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Loved the integrated nature of the electronics, but the SK Lightning is a bit fragile and there are NO SPARE PARTS! Broke an arm on the first crash and now I have a useless frame because I can't get a replacement.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These frames have lots of nice features, but there are some deficiencies.
1. The landing gear legs are VERY fragile. Even a minimally hard landing, especially if the vehicle is drifting at all, they fracture at the notch adjacent to their mounting plate. Fortunately, replacements are available at minimal cost (spare S500 landing gear legs), but they still break too easily. I tried reinforcing the upper surface across the notch by gluing carbon fiber strips with both epoxy and CA, but they didn't stick, even though I roughed up the upper surface of the leg with sandpaper. Plan B is to wrap the upper 4 cm of each leg with 2 oz fiberglass adhered with CA, so I'll see how that works as soon as today's snow melts and the wind dies down.
2. The capacitors on the bottom of the LED and power distribution boards are attached only by their connecting wires, so they dangle below the lower deck. The fix for this is easier with hot melt glue.
3 The translucent covers for the LED strips seem to be pretty brittle. Two of mine fractured. I don't know when it happened, but my quad hasn't had any bad crashes, and they shouldn't break with hard landings or simple tip overs.
Otherwise, the kit goes together well and everything else works
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I highly recommended this product, you can't go wrong for the price. Overall quality is excellent and the parts should stand up to some abuse. The assembly instructions are easy to follow and everything went together without any problems. The electronic components incorporated in the frame are of high quality and worked as stated. The LED strips in each arm are very bright and are adjustable via a push button.

ONLY CON - I just wish HobbyKing would provide spare parts for this kit , which is a bit of a worry.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

esc
battery
motor
acc

产品标签

使用空格分隔标签。使用单引号(')标注词组。