注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global

软推杆(蛇) - D3点¯x千毫米(4支/袋)

软推杆(蛇) - D3点¯x千毫米(4支/袋)

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 4.31
Rating:
Stock:
重量:
45
SKU:
017000017

Price War

产品介绍

软推杆(蛇) - D3点¯x千毫米(4支/袋)

Product
Specifications

额外信息

  • 商品编号:
    017000017
  • Brand:
    N/A
  • 重量(g)
    45.00
  • 长度
    340.00
  • 宽:
    4.00
  • 高度:
    250.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Once again HK provides no information on utilizing these things as there are no connectors and no suggestions where to find connectors to fit the inner rod. Need to use some sort of lubricant so that the inner push rod will slide in the outer sleeve. Very tired of "making do" with new out of the box accessories. A bargain isn't a bargain if the product is unusable without modifications.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Not what I expected. Was expecting piano wire through the blue tubing but never mind, I will find a use for this!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Cheaper version of Sullivan style Ny-Rods ... but work fine. The only problem is unlike Ny-Rod snakes from other sources - you do not get any connectors .... This poses a problem as the inner rod has a hollow tube fornm that is 1mm ID ... Solution ? 450 Helicopters use similar size control rods on the swash plate and heads ... so buy a set of rods for 450 heli head and you have enough connectors that screw into the inner rod fine. Before screwing in - you solder to metal threaded ends so your 2mm clevis can be used or bend a Z. Using heli rods does not expand the inner rod end and passes through outer tube fine.
As long as you support with wedge shaped inserts between fuselage and tube outside the fuselage - there is no need for any other stiffening - they work fine. They are better than the factory fitted 0.8mm control rod runs usually supplied which are prone to flex.
Many problems mentioned by others such as needing wire stiffening, friction, flex etc. are due to installation - not the product. Fitted correctly - they will work on small to medium size models ...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
good product works well with twin boom aircraft
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These came so bent that the inner part wasn't even moving. Not sure if its got heat while shipping. Still tring to make it flat again so I can try using one.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These snakes would be okay for fairly short runs -say less than 500mm - there is quite some slop in them - Having said that, if you are fanatical about zero slop, then you should not be using $0.70 plastic push-rods, now should you ?? - I actually bought them to use the tubes as sleeves for steel pushrods. If you are going to use them as supplied, then apply some silicone lubricant to the inner rods, as there is some friction there.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。