New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

索尼克185电动滑翔机1850mmn(PNF)

索尼克185电动滑翔机1850mmn(PNF)

Discontinued Product

Please continue searching for a similar product.
SKU:
Sonic185-PNP
WANT FREE SHIPPING? Click here to find out more!

这个伟大的希望滑翔机是从艰难的EPO泡沫和被塞制成,飞行,只需要很少的时间进行组装。

技术已经prefitted,与ESC一起200W的无刷电机的外转子,这个伟大的大小滑翔机有足够的力量来迅速达到的高度,它充满了四通道和所有伺服的也已经预先装配。机身配备顺着它的脊椎,消除柔性碳纤维棒和2件可移动的翅膀不仅使声波实用,还具有刚度大的CF翼木匠。

这是一个优良的品质和美观的滑翔机是一个很好的规模,很便宜就可以进入空气,将持续几年来,在天权,声波就会以极大的飞行性能,极大PNF给梦幻般的飞行时间滑翔机,这将吸引所有的RC飞行员!

眼镜:
翼展:1850毫米
长度:1090毫米
飞行重量:980克
电机:无刷先驱者200瓦特
ESC:30A W / BEC
伺服:9克×4

要求:
你自己的4通道TX / RX
1800mAh的2S Lipoly电池

  • SKU Sonic185-PNP
  • Brand -
  • 容量(mAh) -
  • 重量 3490.0000
  • 长度 0.00
  • 0.00
  • 高度 0.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Mine arrived last week. Went together well. The box that the bird came in was a Rtf box and showed a 2200 mah 3 s. way to heavy. I used a 1800mah 3 s and added 3 large washers to the base of the rudder, one fitted to a slot cut in the tail skid. The other two are just stuck to the side of the tail. On the maiden I gave it full throttle and let it go vertical, no issues reaching a good altitude. I also covered the bottom of the fuselage with "glass repair tape", that's what it's called in Bunnings. This keeps the bottom of the fuse from getting all crappy. The wing flutter is a little scary, just watch your speed and all is good. Over all I think this bird is good value.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Mine arrived last week. Went together well. The box that the bird came in was a Rtf box and showed a 2200 mah 3 s. way to heavy. I used a 1800mah 3 s and added 3 large washers to the base of the rudder, one fitted to a slot cut in the tail skid. The other two are just stuck to the side of the tail. On the maiden I gave it full throttle and let it go vertical, no issues reaching a good altitude. I also covered the bottom of the fuselage with "glass repair tape", that's what it's called in Bunnings. This keeps the bottom of the fuse from getting all crappy. The wing flutter is a little scary, just watch your speed and all is good. Over all I think this bird is good value.

This is my first plane and due to my inexperience it has taken some serious abuse but it repairs up really well. All the servos seem to be pretty tough I did strip one by glueing the rudder wire whilst repairing a break in the tail. It works really well as a glider but is very agile an acrobatic lots of fun. I am running a smaller prop and am using a 1300 3s battery instead of the 1800 2s recommended and I find it works real well and I can glide around for ages if I want to. It also seems to balance out a lot better too.
Big thumbs up have really enjoyed this plane. Would like to have one that I haven't beat up so much though

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is my first plane and due to my inexperience it has taken some serious abuse but it repairs up really well. All the servos seem to be pretty tough I did strip one by glueing the rudder wire whilst repairing a break in the tail. It works really well as a glider but is very agile an acrobatic lots of fun. I am running a smaller prop and am using a 1300 3s battery instead of the 1800 2s recommended and I find it works real well and I can glide around for ages if I want to. It also seems to balance out a lot better too.
Big thumbs up have really enjoyed this plane. Would like to have one that I haven't beat up so much though

The usual good service from Sydney. Very nose heavy, even with recommended 2 cell 1800 battery . Elevator pushrod binds so servo doesnt centre well. Solution : put elevator servo in rudder with direct pushrod to elevator...easy to route the cable in the foam. Flies well on 2 cell battery with sufficient power to get up to the thermals so no need for a 3 cell. None of the reported flutter in my plane. Overall a happy camper. Looking forwards to flying it on the slope

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The usual good service from Sydney. Very nose heavy, even with recommended 2 cell 1800 battery . Elevator pushrod binds so servo doesnt centre well. Solution : put elevator servo in rudder with direct pushrod to elevator...easy to route the cable in the foam. Flies well on 2 cell battery with sufficient power to get up to the thermals so no need for a 3 cell. None of the reported flutter in my plane. Overall a happy camper. Looking forwards to flying it on the slope

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!