注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global

微调折叠道具(小)

微调折叠道具(小)

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 3.29
Rating:
Stock:
重量:
15
SKU:
OR002-00501

Price War

产品介绍

微调折叠道具(小)
科莱风格,适合2.3〜2.5毫米电机轴
螺旋桨轴螺栓为5mm
需要一个推进器,以满足5毫米轴。
重量:9克
直径:31毫米

Product
Specifications

额外信息

  • 商品编号:
    OR002-00501
  • Brand:
    N/A
  • 重量(g)
    15.00
  • 长度
    31.00
  • 宽:
    27.00
  • 高度:
    31.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Good quality, low price, perfect for small gliders
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These hubs are definitely not 24mm diameter, more like 31mm.

Please change the specs or stock the correct size.

It is very frustrating to wait a week for the item only to find it's the wrong one and there is no economical way to send it back.

This is the second item I have purchased which has not been the same as the one shown in the ad!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These hubs are garbage! The prop mounting holes are so close to the edge of the yoke that they break or elongate with props bigger than 7 or 8". Material is cheap and brittle. The collet will NOT grip a 2mm motor shaft! Their 2.5 and 2mm spec is pure BS.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Diameter is 31mm and not 25mm.

Pin location looks a little bit fragile.

Fits "graupner 8x4.5" blades if you sand it a little bit.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This spinner does not work on a motor with 2mm shaft as stated,because it will wobble like hell if you tourqe it down as much as you needed to make it stay on the 2mm shaft.I have tried on my AD-100L.The way i "solved" it was to put a thin shrinking hose on the shaft,making it around 2,3mm,then the wibration was gone.



\Patrik L
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
a good Spinner for smal planes.



but not the right for mine.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Diameter is 31mm

Height is 25mm

Collet size 2.3mm

Blades 2mm hole, 6mm wide

Pins pitch 19mm



The 25mm diameter I wanted would have been great!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Look better than the folding prop in black plastic, more light too.

I will try to use it in a Mini Discus from Graupner with 7*4 prop and HXT 16g motor...

We'll see ^^.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。