The good: Super small, easy to use, very light and you can choose the position of displayed information. The BAD: I bought two of these. First one works fine, but instead of 12.4V (my fully charged 3S pack) it shows 11.5V! 0.9V difference! I thought, that this is a very poor precision... Barely usable. Was I right? I was so wrong! :-( The second one measured 0.1V on battery 2 connector, where NOTHING was connected and 4.2V (!) on the battery 1 connector, where the fully charged 3S battery was connected. Not mention those weird strips instead of information. Sometimes good and clean OSD, sometimes completely unreadable... What a quality product! :-(bought this for a friend who is using fatshark teleporter v5 cant confirm it works or not but he is a genius he for sure will figure this out on his ownFor the remarkable low price this is a great OSD system, especially for beginners.
Why land every minute to check your battery voltage, when you can have the numbers you need in your video googles? (or on a monitor)deja 3 de command,cette osd se limite au minimum : temps de vol,tension de batterie 1 et tension de batterie 2.mais c'est bien suffisant pour par exemple le fpv race.il y a un petit bouton dessus pour reinitialiser le timer.vraiment bien pour le prix ;)Ok voltage is off but its cheapWorks Great ans easy to setup. Wish all the pins were on the same side would make a cleaner install.Very cheap, simple and easy-to-install module!It does not degrade the image quality. I liked the huge amount of display options.Very useable. Great for mini quads. The voltage on mine reads about 1 volt less than actual battery voltage. This is not a problem if you know that before you take off with a fully charged battery. In my case I make sure I land when My screen voltage on monitor reaches 9.5 volts which is actually closer to around 10.8 to 11 battery volts. For the price, it is hard to beat.Good quality and price. Perfect when you only want the minimum OSD or to try your first OSD.Readout is off by 0.5V.
OSD is unreadable if you are using a GoPro with the HUD.
Maybe not a big deal for 9$, but I'll probably end up replacing it shortly.
No File Name download now [89kb] GoPro w/OSD Wiring download now [45kb] 2 BATT COMPLETE SCHEME download now [142kb] 2 BATT COMPLETE SCHEME download now [142kb] No File Name download now [89kb] No File Name download now [106kb] No File Name download now [115kb] No File Name download now [115kb] No File Name download now [115kb] No File Name download now [115kb]