注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册

T-45 R / C EPO喷气机(套件)

T-45 R / C EPO喷气机(套件)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
2389
SKU:
LS-T45ARF

esc
battery
servo
acc
产品介绍

在T-45今天美国海军航母能够培训飞机仍在使用。这种规模的T-45是你的训练作为RC喷气机飞行员肯定的一步!

从耐冲击超韧EPO发泡成型这架喷气机来准备组装,也包括可操纵前起落架,固定的主起落架和一个5刀64毫米EDF风扇单元。

将需要一个3S1P 1500mAH的脂,30Amp ESC,发送器和接收器有4个或更多的频道和副翼的混合,3×9克伺服(一个用于可操纵前起落架,一个用于副翼,一个用于电梯)。该64毫米EDF单位来预先安装在机身使得安装你的选择EDF无刷电机的微风。

产品规格:
翼展:780毫米
长度:880毫米
飞行重量:〜610克
涵道风扇:64毫米风扇单元(包含)
电池盒:90x46x46(MAX)
广播频道:4

需要:
电池1500mAh的3S1P
电机:B204​​0款无刷内转(适合64毫米EDF风扇单元)
ESC:30A
伺服:3×9克
电台:您自己的Tx / Rx

Product
Specifications

额外信息

  • 商品编号:
    LS-T45ARF
  • Brand:
    N/A
  • 容量(mAh)
  • 重量(g)
    2389.00
  • 长度:
    835.00
  • 宽:
    205.00
  • 高度
    295.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Das Modell aus EPO ist echt sehr Stabil und hllt einiges aus.

Ich fliege das Modell mit einem 4200kv Motor und einem 30A regler und einem 8Blatt Impeller als akku verwende ich ein 1900Mah 3S 30C akku und damit sind ca 3 1/2 Minuten vollgas drinn es passen aber auch ohne probleme die Turnigy 3000mAh 4S 20C Lipo Pack (Produkt ID: T3000.4S.20)rein aber da sollte mann dann den passenden motor dazu haben sonnst raucht der motor ab.



Das modell ist sehr stabil in der luft und ist auch was fr vortgeschrittene Anfnger.



Handstart ist ohne probleme mglich und das landen ohne Fahrwerk ist auch kein problem.

Das Modell ist echt zu empfehlen.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
took mine for its first flight this morning....as the ground was too wet for ground take off I did hand launch....1st light toss....took off level no problem whatsoever, fantastic flyer, I using a 35esc 6 blade EDF 4300KV with a 3S 1300mh Nano Tech. Lands beautifully it very gracefull in the sky and very fast on rolls which I like and yet very stable. not super fast with this set up but fast enough far from slow. But as a trainer fighter jet it suites it very well and the construction time was about 40mins quality pretty good. Can fly this jet slow too easily under 50pcnt throttle. Nice performing T45.5/5!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I had Motor, Speedy and Batteries already. Perfect for me, Plane was quick to build and flies great. I have never installed the undercarriage , bellylanding is easy to do. Only bad thing is the red nose. The material is too thin. I add some foam from inside, that helps to avoid any damage.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The plane is rather far pre-built, thus a kit, and mine had all parts well aligned and glued. The cons were the fan unit was not so easy to replace as it was glued in (I had a complete unit ready for this). Also the main wing lock, rear pins, are pretty weak.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Super zufrieden mit dem Teil. Hab ein leichtes EZFW eingebaut. Damit macht es noch mehr Spass. Sieht super aus. Und ist wohl ein bisschen schneller, war mir aber nicht wichtig. Motor: Turnigy 2615 4800kv, ca. 31A an 1,6Ah 3S.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this kit, its good quality and arrived with no damage. It took me 7 hours to assemble which i built with spare parts i had laying about, and for the maiden flight it flew really well. Ailerons only need about 60pcnt travel. I didnt have enough power on 3s so i put in a 4s 1600mah nano tech which fits snugly. I burnt the motor out and left a smoke trail behind me which i had a chuckle about so now im waiting on a replacement motor and fan that can handle 4s. Its best to set this hawk up to handle 4s. The only real drama is accessing the fan inside. Theres no proper cut out for it. U can put the motor in using magnetic screw drivers but to remove the whole fan unit u need to cut the bottom of the fuse. Space is a lil tight up front so i mount the esc in the air ducting, works well. Other then that its a sweet flying little edf on 4s.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Super gemachter kleiner Flieger. Die Flugeigenschaften sind mit 3S 1800 eher trainermig und vollkommen problemlos. Ausgerstet wurde der kleine mit den Komponenten aus einem zerbrselten AMX Jet. Der Impeller der beiligt ist haargenau der gleiche. Ein Stck mattschwarz lakierter Joghurtbecher als Schubdse (53mm)bringt reichlich Performance.
Querruder ber 2 Servos im Flgel direkt anlenken, die eingebaute Torsionsanlenkung hat reichlich Spiel. Die Oberflche ist fr einen Schaumflieger wirklich gut. Etwas zustzliches Klebedekor und der Dinger wird richtig hbsch. Nehme gleich noch einen zweiten fr einen fiesen 4S Antrieb und werde auch das Seitenruder noch anlenken. Tolles Gert fr zwischendurch.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Amazing value for money.Although not for the novice builder as the instructions are pathetic.Great quality epo frame with ply and cf in the right places.Use a strong servo for the elevator as it has to push two rods to two seperate elevator halves.My set up is.
Motor/fan-Lander 64mm 4000kv
Esc-Turnigy trust
Servos-Turnigy mg's 2kg torque
Tx/Rx-Frsky.
Battery-1800mah 4S
AUW-670g-Power-665watts @40amps.
Some foam need removing to gey battery far enough aft for cg.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great kit received it today and built it today amazing quality for the price, this one will run on 1500mah 3s1p and 4800kv inrunner. considering buying second for more powerful set up. very impressed, great quality, great price, great job HK.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Mijn eerste vlucht gedaan en gelijk fpv gevlogen. geprobeerd met een 3 cells 2200 kwam ie niet los van de grond. toen een 3cells 1000 mah en vloog perfect voor een beginners edf (niet eens naar de cg gekeken op het oog alle stuurvlakken recht gezet en hoefde tijdens het vliegen niks uit te trimmen) Vliegt ook super langzaam en heel goed controleerbaar. goede vliegtijd terwijl mn fpv set op de zelfde accu zat. extra gewicht van de orange stabilizatie en zelfgemaakte rudder 1 servo en stuurstang extra :) 4 goedkoopste 9gr servo's en stuurt super precies kon het gewoon niet geloven. landen op gras zou ik niet aanbevelen met landings gestel.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

esc
battery
servo
acc

产品标签

使用空格分隔标签。使用单引号(')标注词组。