注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册

T5682 Turnigy临比较无刷电机内转子1700kv

T5682 Turnigy临比较无刷电机内转子1700kv

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
992
SKU:
T5650-1700
产品介绍

当你需要严重的电力为您的大型船性能比较或1/5规模的车模,没有进一步看比Turnigy临比较系列inrunners。这些高档设计的电机提供高品质,超高性能和可靠性。电机重新可建,并设有可移动的端盖,电机轴有机械加工平整,为8mm的直径来处理这个庞然大物的电机所产生的极端扭矩!

眼镜:
尺寸:56x82mm
KV:1700RPM / V
Lipoly细胞:6S
最大效率:4800W
目前在最大效率:180A
最大电流(10秒):265A
空载电流:4.4A
内阻:0.0038
:8毫米
重量:690克

Product
Specifications

额外信息

  • 商品编号:
    T5650-1700
  • Brand:
    N/A
  • 重量(g)
    992.00
  • 长度
    0.00
  • 宽:
    0.00
  • 高度:
    0.00
  • 千伏(转/ v)的
    1700.00
  • 最大电流( A)
    265.00
  • 功率(W):
    4800.00
  • 长度B (毫米):
    82.00
  • 可以长深(mm )
    74.00
  • 最大电压(V)
    25.00
  • 轴(MM):
    8.00
  • Unit Weight (g):
    690
  • 直径C(毫米)
    56.00
  • 总长度E(毫米)
    106.00
  • 电阻( MH):
    0.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I had a minor problem with one of the wires. Shrinking tube was not double as on other two, and after heating it, to change stock connectors, was cut a few centimeters due to heat. Then motor was tested under a load at 180A at 6s with a lot of cooling air. Rpm was 26K. After 4 min of almost full throttle smoke started coming out of the motor and I could here a "screatching noise". I stopped motor and thought the bearings were shot. Well, something worst had happened.The spindle/rotor of the motor holds the magnets together with a bit of blue epoxy(2 drops each only!!!) and a thin film of I guess, polyamide". Magnets had broken both epoxy and film and touching inside of motor. Final result 2 of them were badly scratched. Now I need to re-glue them with a very good epoxy hopefully, and balance the whole thing. That means a lot of work...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This is a Great Motor,and for the price you can't beat it. I have been running it in my 42' Mono now for 2 mounths every day,(5s 40c Batts) and no problems.This motor would also work great in a 1/5 scale truck or buggy.Awsome power,around 6 Horse Power,Instant throttle response.Will buy more as soon as they come back in stock.(hope they get more).Would recommend this motor for anyone needing massive power.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Wow... I fired up this bad-boy today for a quick test free-holding it. It spins up to max speed instantly with no load. Running at max speed It is incredibly smooth. Someone took the time to do a high quality build here and custom balanced the internal shaft and magnets.

What an impressive motor. This is beyond belief.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just got my hands on this big block and what I can say its a tremendous powerhouse to be used on 1 meter cat.Would like to know what is the best esc to connect to this beast?
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Wow! What a monster! It is definatly a TP Power Motor- Parts inside and Cables from the same manufactor. More Power then the Leopard 5682! Using this Motor in a 1/5 Redcat Rampage XBe- Insane Power!
This is a powerful High Quality Motor with incredible Torque.
4 Pole 18 Slot. Super Low Price!!! Buy, Buy, Buy!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。