注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global

靶机V1.5玻纤FPV飞机1520毫米(ARF)

靶机V1.5玻纤FPV飞机1520毫米(ARF)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
1715
SKU:
411000001

esc
battery
servo
motor
acc
产品介绍

该靶机是一个伟大的FPV的飞机已经为工作而专门设计不仅是工具包低价购买,这伟大的小模型还便宜在空气中得到的。

*新的靶机V1.5现在包括对机身的前面有一个可拆卸的摄像头清晰圆顶。这种磁篷可以快速方便地访问你的相机,同时提供从元素和一览无遗的保护!

该靶机设有一个玻璃纤维机身是在前面的摄像头安装开放的,也有一个内置的防眩盖。该模型是专为推进电机正如你所期望,同时也设有一个中置,大开口的电池和设备的访问。大和开放式的机身面积,不仅有足够的空间供你的FPV设备和lipoly,它也提供了大量的电池和ESC冷却从打开机身正面。下架是稳健,具有在后方合金脚螺丝和可操纵的前轮前面。

该靶机是一个相当快的构建,伺服延长线是预先安装到轻翼,它被安装在一个CF杆和环氧树脂粘合到位。所提供的硬件是全面的,整体的部件数量较低,这意味着你将在双快的时间遇到​​FPV。该靶机,其tailess,后掠翼是同类产品中最不寻常和有趣EP FPV车型尚未之一,是一定要得到人们的重视无论它飞翔!

特征:
•*新清除可拆卸的摄像机包括圆顶
•坚固的玻璃纤维机身
•打开前置摄像头安装防眩光盖
•大型中置式舱口
•轻木构造翼和翼梢小翼
•在坚固的马车
•可控前轮
•极少的外部元器件
•所有包括硬件
•推杆配置

眼镜:
翼展:1520毫米
长度:500毫米
飞行重量:500g〜700克
机翼面积:17.2dm2
翼载荷:29克/平方分米〜40.6克/平方分米

要求:

你自己的4〜6个通道TX / RX与升降副翼混
28-36无刷电机外转子 1800 千伏
3×9克伺服
30A ESC W / BEC
1300mAh的2200mAh的〜3秒Lipoly电池
FPV设备

Product
Specifications

额外信息

  • 商品编号:
    411000001
  • Brand:
    N/A
  • 重量(g)
    1715.00
  • 长度
    870.00
  • 宽:
    160.00
  • 高度:
    200.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Good fiberglass plane. But do not forget to glue front wheel mount, if you wish to start not from sling or hands. Have myself one and now i am preparing a sling for take-offs. Plastic camera dome is very thin and will break at first problematic landing. So, have in mind to make another one or have camera with landing protection.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
For $100 shipped, it's not all bad. After reading many forum threads and reviews, I thought it would make a nice FPV plane with a few mods.
Forget the landing gear. I'm mounting a belly pan and wing skids for grass landings. I'll use my JetaPult for launching.
As far as the power system, I'm installing an Electrifly .10 Rimfire motor with a CF folding prop on the back. Don't care if the outrunner motor is on the outside.
The plastic used for the camera pod is useless. Hazy and distorted view looking through it. Better to paint it grey and put the camera on top, or at least cut a hole for the camera to see through the hazy bubble nose. I'll also put some extra CF bracing on the wing joints, to help keep the wing from folding, under stress. I'm also thinking of adding two small v-tail like fins on the back, to add more stability.

Overall, it's built pretty good, with the exception of the camera bubble and landing gear.
If you don't mind making some mods, this CAN be a very good plane.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Over use of resin makes it nearly impossible to mount the motor internally. Significant modifications are required if you intend to do this. I cut out the firewall and rebuilt it to mount the motor inside for the clean look. Nice finish but my nose was "tweeked" and slightly twisted. Shouldn't be a problem but for $70 ive seen worse...
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

esc
battery
servo
motor
acc

产品标签

使用空格分隔标签。使用单引号(')标注词组。