注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global
  • USA

塔罗牌ZYZ22 GOPRO无刷相机万向控制器

塔罗牌ZYZ22 GOPRO无刷相机万向控制器

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 53.40
Rating:
Stock:
重量:
90
SKU:
297000033-0

Price War

产品介绍

塔罗牌不需要介绍,他们的名字是高质量的代名词,并有2轴万向节ZYX22控制器也不例外。

塔罗牌ZYX22无刷控制器万向节从市场上磨BLGC的所有其他运行独一无二的,他们移除板FTDI的芯片,以节省体积和重量,但也很容易附带的USB适配器使用。而塔罗牌的设置和调整(如果需要)电脑的用户界面尚未最简单,最直观的看到。塔罗牌包在更多的选择,像速度模式或位置模式的支持,-以及自定义初始俯仰角,并支持标准的RC输入,以及系统总线和直接DSM2 / DSMX输入通过卫星接收器。塔罗牌ZYX22是目前最精致的无刷框架控制和IMU在市场上和完美的T-2D万向节或其它100-300克摄像头万向节系统。

特征:
•电源电压极性保护和电压补偿
•短路保护
•自定义的初始俯仰角
•灵敏度参数调整支持和软件
•支持操纵杆速度模式和位置​​模式
•双32位高速ARM核处理器
•易于使用的软件

产品规格:
工作电压:DC 7.4V〜14.8V(推荐12V,三锂电池)
工作电流:小于200mA-500毫安(电源电压以及相关电机)
工作温度:-15℃〜65℃
处理器: 双32位高速ARM核处理器
传感器: 三旋翼MEMS陀螺仪的转子MEMS加速度计
最大角速度:2000°/秒
最大加速度:16克
控制频率:2000Hz的
电机驱动频率:20KHz的(无噪音滤波驱动器)
控制精度:0.1度
控制角范围:-45°〜45°(卷),-135°〜90°(倾斜)
电源接口:DC 7.4V〜14.8V(推荐12V,三锂电池)

包括:
ZYX3转子陀螺仪的USB连接线组×1
两轴陀螺仪传感器头×1
两轴陀螺仪头主控制器×1
USB计算机接口×1
ZYX22无刷控制器万向节

Product
Specifications

额外信息

  • 商品编号:
    297000033-0
  • Brand:
  • 重量(g)
    90.00
  • 长度
    80.00
  • 宽:
    35.00
  • 高度:
    60.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
good! Tarot ZYZ22 GOPRO Brushless Camera Gimbal Controller
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
mi era capitato di invertire l'aggancio dell'accellerometro su un kit completo tarot 2D e per mia sorpresa vendevano anche solo l'elettronica di ricambio. Invece di riacquistare tutto il gimbal ho riacquistato solo l'elettronica che identica a quella a corredo con il gimbal. Per sostituirla basta aprire l'alloggio dell'accellerometro e via. Non ci sono controindicazioni. Se pu essere fatta una nota negativa, i contatti sono facilmente invertibili e scambiabili, infatti mi capitato di bruciare la scheda inserendo il contatto dell'accellerometro nell'apposita presa per collegare l'usb. Si bruciato sia l'accellerometro che la scheda.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
It works but LOTS of small nagging issues.
1. No standard servo connectors. Micro connectors on the board (1.25/Molex) so you should purchase adapter or solder wires directly. These are not mentioned in suggested to buy section, needless to say. Annoying, especially for post orders.
2. USB interface is based on old Prolific chip which is NOT supported in Win 8. The other chip will work but interface socket on board is 4 pin 1.25 Molex with unlabelled pins. Had to dig up my Win7 notebook. Annoying.
3.No protection case for sensor. Sensor wire is to short to mount it on gimball for larger frames.
4.Long init after power is plugged.

But it work.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Works perfectly! But the sensor cable should be longer...
Mounted mine on the HobbyKing Brushless ActionCam Gimbal With 2208 Motors and 3K Carbon Construction and GOPRO Hero 2.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice little controller for the price, just a bit hard to tune up, but once it is tuned, I think it works well. I had to order my replacement after burning up the first in a failed firmware update process...OOPS!
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。