New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

TR 42-40B 900kv无刷外转子式:AXi含义3520

TR 42-40B 900kv无刷外转子式:AXi含义3520

Discontinued Product

Please continue searching for a similar product.
SKU:
TR4240B-900
WANT FREE SHIPPING? Click here to find out more!

TURNIGY AerodriveXp

型号:TR42-40B
最大效率 :30A
最大负载:45A
KV:900
功率 :550W +
重量 :125gr
电压 5-15V
尺寸 :42x40mm5毫米轴
定子尺寸 :3520
威力相当于:0.30至0.35发光引擎
建议的道具尺寸 :11x5.5
:5毫米

  • SKU TR4240B-900
  • Brand -
  • 重量 167.0000
  • 长度 0.00
  • 0.00
  • 高度 0.00
  • 千伏(转/ v)的 900.00
  • 最大电流( A) 45.00
  • 电阻( MH) 0.00
  • 最大电压(V) 15.00
  • 功率(W) 550.00
  • 轴(MM) 5.00
  • 长度B (毫米) 41.00
  • 直径C(毫米) 43.00
  • 可以长深(mm ) 17.00
  • 总长度E(毫米) 60.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Got this motor installed 25e hyperions first take off it start screeching sounds and up in the air try to do 3d and hover I throttle 20pcnt and half way throttle the motor stop? I let it fly and glide while the motor stop 3-second later throttle back the stick motor start running again, I am glad I am able to glide my plane than crashing it. I've called HK but not answering the phone really disappointed. I have bought many different motors but this one got it bad.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Got this motor installed 25e hyperions first take off it start screeching sounds and up in the air try to do 3d and hover I throttle 20pcnt and half way throttle the motor stop? I let it fly and glide while the motor stop 3-second later throttle back the stick motor start running again, I am glad I am able to glide my plane than crashing it. I've called HK but not answering the phone really disappointed. I have bought many different motors but this one got it bad.

Hi all, bought this motor some time ago& havent used it yet but as others have found one bearting is suss. I noted that someone referred to boca bearings for replacement, well boca has these bearings they are:-MR695-ZZ & MR115-ZZ of (5x11x4mm) & (5x13x4mm). cost is around $5.00 for these two freight, so not bad in my opion, by the way Im using 4s lipo with 11x5.5 apc prop. develops around 485w @ 33amps/16v & with a cut down 12x6 apc develops 660w @16v/44amps also not bad, have fitted to the spitty also bought from HK, havent flown it yet had quite abit of customising to to fit retract servo/new housing for it. anyway cheers bainopf

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hi all, bought this motor some time ago& havent used it yet but as others have found one bearting is suss. I noted that someone referred to boca bearings for replacement, well boca has these bearings they are:-MR695-ZZ & MR115-ZZ of (5x11x4mm) & (5x13x4mm). cost is around $5.00 for these two freight, so not bad in my opion, by the way Im using 4s lipo with 11x5.5 apc prop. develops around 485w @ 33amps/16v & with a cut down 12x6 apc develops 660w @16v/44amps also not bad, have fitted to the spitty also bought from HK, havent flown it yet had quite abit of customising to to fit retract servo/new housing for it. anyway cheers bainopf

I have the same screaming noise on but only on quick throttle up. If you do it slowly it does not do it. Since I have this on a 3D, I need the quick up & down. I have written HK to see what if anything they will do since this seems to be a known problem. Does anyone know what/where to bearing can be ordered, part numbers etc. Please post.



I did run a a watt test and got 320 watts with a 3000mah 30C discharge on an 11x6.5 prop. But with the screaming noise I did not run any more. Going to run a 12.6e test once I get this solved.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have the same screaming noise on but only on quick throttle up. If you do it slowly it does not do it. Since I have this on a 3D, I need the quick up & down. I have written HK to see what if anything they will do since this seems to be a known problem. Does anyone know what/where to bearing can be ordered, part numbers etc. Please post.



I did run a a watt test and got 320 watts with a 3000mah 30C discharge on an 11x6.5 prop. But with the screaming noise I did not run any more. Going to run a 12.6e test once I get this solved.

The good motor. Model Madness 2 1400cm, 1600??, 4S 2200ma, a propeller 13X4, a current 38?. Perfectly flies.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The good motor. Model Madness 2 1400cm, 1600??, 4S 2200ma, a propeller 13X4, a current 38?. Perfectly flies.

C est un trs bon moteur. Je le fais voler dans un discus de 2 mtres 60 avec une helice de 11 x8. La monte est de 30. Prevoir une helice de 14...

A acheter sans hesiter

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

C est un trs bon moteur. Je le fais voler dans un discus de 2 mtres 60 avec une helice de 11 x8. La monte est de 30. Prevoir une helice de 14...

A acheter sans hesiter

My tests

4S 13X6 and 11X5, 5









http://www.youtube.com/watch?v=2ea-mmnkrZQ



http://www.youtube.com/watch?v=hH3PwQI0XcE







4S for this motor a lot.

I think only the 3S

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

My tests

4S 13X6 and 11X5, 5









http://www.youtube.com/watch?v=2ea-mmnkrZQ



http://www.youtube.com/watch?v=hH3PwQI0XcE







4S for this motor a lot.

I think only the 3S

Just got another testil.Ne not like what the weight, along with mounting 171g although it was stated 125g is probably no fixing.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just got another testil.Ne not like what the weight, along with mounting 171g although it was stated 125g is probably no fixing.

Just used this as a replacement on my E-flite Apprentice. Motor bolted straight in, and give 7450 rpm at 22.5 amps. This is better than the original motor that gave 7050 at 24 amps. Nice!



See my detailed review at:



http://www.rcgroups.com/forums/showthread.php?t=915223&page=34

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just used this as a replacement on my E-flite Apprentice. Motor bolted straight in, and give 7450 rpm at 22.5 amps. This is better than the original motor that gave 7050 at 24 amps. Nice!



See my detailed review at:



http://www.rcgroups.com/forums/showthread.php?t=915223&page=34

Very powerful motors. Much bigger than I expected. The shaft is a little soft, which bends if direct head-on coalition. Now looking for replacement shaft.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very powerful motors. Much bigger than I expected. The shaft is a little soft, which bends if direct head-on coalition. Now looking for replacement shaft.

8 Minutes

That's how long it lasted! After the first flight the prop shaft was so tight it would hardly turn and it made some weird sounds while flying. Have already orded new bearings for it. BUT even if it cost five bucks if it don't work out of the box then it is not worth having!!!

TURNIGY should try some QC I would have paid $20 more if it had good bearings and been happy!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

8 Minutes

That's how long it lasted! After the first flight the prop shaft was so tight it would hardly turn and it made some weird sounds while flying. Have already orded new bearings for it. BUT even if it cost five bucks if it don't work out of the box then it is not worth having!!!

TURNIGY should try some QC I would have paid $20 more if it had good bearings and been happy!

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!