注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global
  • USA

TrackStar POWER开关

TrackStar POWER开关

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 15.66
Rating:
Stock:
重量:
16
SKU:
9052000074-0

Price War

产品介绍

TrackStar介绍了POWER开关!

它是一个很小的MCU通/断开关为您的无线电控制模型的控制。一个简单的按钮操作而消除了与普通的机械开关的断续接触相关联的问题的开关。

该TrackStar POWER开关可以Lipoly模式下运行,其中开关单元会自动detech低Lipoly电压和切断电源,以保护您的Lipoly蓄电池过度DIS充电。电源开关也可以告诉你关于你的电池的剩余容量和条件。

特征:
与不同的安装方法2底盖来
可以Lipoly模式下运行
同时低电压检测和指示

眼镜:
输入电压:4〜12V
低压保护:6.2V(Lipoly)
最大。电流:10A
电池模式:NIHM /镍镉/ Lipoly
工作温度:0〜50°C
重量:<7克
尺寸:22.5mmx16mmx8.5mm

Product
Specifications

额外信息

  • 商品编号:
    9052000074-0
  • Brand:
    TrackStar
  • 重量(g)
    16.00
  • 长度
    70.00
  • 宽:
    20.00
  • 高度:
    40.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I am testing these to power jets (2 in parallel with 2 batteries) and so far i am impressed. They are small and work perfectly. Shorting the pins on the receiver does not affect the switches so that is looking very promising.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
exelent petit inter merci hk
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just received this switch, works well and I like the fact it has a Lipo setting to warn you when the voltage get too low. I was worry when I read the description that it will cut off, but it did not! I set it up on a voltage supply, at 8.0V the LED is green. At 7.6V the LED turned orange and the case is also illuminated. When the voltage lowered, the case illumination started to flash. When I turn the voltage to 4 volt,the switch is still on, no cut off. Also it let me turn on the switch.

The only negative part of this switch is the mounting method. If you are to use it on an airplane, the mounting lugs on the switch body will only allow you to mount it with the wires on the outside.

I am going to use it on the ignition system of the gas engine. Still scratching my head on how to mount the switch!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good quality switch.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
great switch for the models that do not have lipo safe, you can use a lipo in any model that you have
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Top Schalter ich Habe ihn in einen Mugen MRX4 verbaut mit einen 2S Lipo

und arbeitet dort ohne Probleme

( und ist auch noch Wasserdicht ) super.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
ich habe den schalter in einem 1:8 buggy verbaut und macht dort gute dienste .

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I ordered two of these. I always order two items of this nature from HobbyKing because most of the time only one will work. And that is the case here! One works and one does not work! And that's the way it is at HobbyKing. You are the Beta tester!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Gewicht 6,66g mit Stecker-Kabel 14cm und Buchse-Kabel 16cm

mit Bodenplatte 3 Befestigungsloecher 3,2mm - zweite Bodenplatte ohne Befestigungsloecher beiliegend

Abmessung 22,2 x 16,2 x 8,8mm (ohne Befestigungslaschen)

Abmessung 34,5 x 22 x 8,8mm (mit Befestigungslaschen)

Druckknopf arbeitet gut bei festerem Wiederstand
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。