别让它的体积小傻瓜你。 1/16 Turnigy硝基-T Truggy是一个严重的小赛车！
我们已经开始与越野车的平台，beefed起来，增加更大的车轮/轮胎与0.07引擎使得它更加美好！该Turnigy 1/16 4WD硝基-T Truggy现在提供更多的权力和更高的最高速度，只需要满足您耗电胃口的！
与日本开始做拉启0.07 CI硝基发动机，调整管，轴驱动四轮驱动 - 有钢托轴和盘式制动器，这个小马车蜱所有的箱子。它有一个很大的范围内可调的开箱即用，如：可调节上控制臂，冲击位置，冲击预负荷，后悬架侧倾中心，可调低至停止，前/后倾杆。
•几乎可以运行 - 拖放在您的无线电系统，电池和驱动！
最小离地间隙（F / R）：25-30MM
Wow what a great little truggy! Only run two tanks of fuel through so far but crikey what a ripper set up. Might not be well suited to proper racing, but for ripping up your local park or front yard with a mini screamin machine, you cant go wrong. I got it on sale of course, so great value for the money in my case. Maybe not worth full whack, so I reckon wait for a special if your coin is tight.
looks great, pretty quick full tilt, easy to tune and of course, Cheap fun!
not super strong and as it is quite quick, light and nimble, its enough to have some fairly decent stacks over pretty tame grounds. Receiver space is on the tight size too, even for a micro receiver.
No one way bearing problems on this one, its easy to start and with some minor tuning, it's running spot on. Fuel tank is on the small side, but ths just makes for regular well timed pitstops for a bevvie!
9/10 for fun timesCan't give it 5 star just yet, but for the price, it's a great little car. Servo settings seem just right out of the box, started right up and idled within the 3rd pull of the starter, ran 3 tanks idling without a hiccup.
Only 2 thing I wish, 1 I wish it had a 2 speed gear box (which is available aftermarket) and 2 it needs a larger fuel tank, only about 8-10 minutes idling emptied the tankUpdate. Had steering servo strip gears and fail. Installed a Hitec metal geared servo and it has worked out great. Been beating this thing up at the local coarse for over a month now and it has performed great. Love running this truggy. Had its teething problems but once solved this truggy has been rock solid. Fun little machine.Very fun 1/16th truggy! Running this will put a smile on your face. I would not recommend this to a first timer due to the following problems I had. First, the clutch springs broke during break in. Have new springs coming from International WH but could not wait so I fabricated springs out of .80mm piano wire. They work great with several runs w/o a problem. Second, the one way bearing on pull starter failed,(after many, many, many pulls) but I managed to find new bearings online. Again, could not wait, so fixed bearing and got truggy back up and going. Have several runs with the fixes I made and truggy runs very well. Worth the $100 price. Easy to work on. Would buy againDon't bother with this.The buggy itself seems good but the engine is full of problems.
Hard to start and the pullstarter mechanism is of poor quality.There is a one way bearing that will pack up after just a few starts.I bought 4 of them as Christmas presents and now I have 4 useless buggys sitting on the workbench.Is my own fault/should have done a bit more research before purchasing.The one way bearing is available to buy(when in stock) but I quess it will pack up again.something to do with the pullstarter shaft not sitting straight when engaging the bearing.u are warned!!!!