注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • USA

Turnigy 2615 EDF先驱者4800kv 55 /64毫米

Turnigy 2615 EDF先驱者4800kv 55 /64毫米

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 17.10
Rating:
Stock:
重量:
100
SKU:
T26151A4800

Price War

产品介绍
Turnigy 2615 EDF先驱者4800kv 55 /64毫米
眼镜:
KV-4800
尺寸:1.52×26毫米
:2.3 /3.0毫米
电压:11.1V
重量:66克
空载电流:3A
空载转速:55560
负载电流:34.3A
负载转速:41320
推力:690克
安装孔螺栓圈:18毫米
MTG。孔数和尺寸:4×M2.5
 
包括2轴,2.3和3.0毫米
Product
Specifications

额外信息

  • 商品编号:
    T26151A4800
  • Brand:
  • 重量(g)
    100.00
  • 长度
    92.00
  • 宽:
    44.00
  • 高度:
    53.00
  • 千伏(转/ v)的
    4800.00
  • 最大电流( A)
    34.30
  • 功率(W):
    0.00
  • 长度B (毫米):
    52.00
  • 可以长深(mm )
    18.00
  • 最大电压(V)
    11.00
  • 轴(MM):
    3.00
  • Unit Weight (g):
    66
  • 直径C(毫米)
    26.00
  • 总长度E(毫米)
    65.00
  • 电阻( MH):
    0.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Tested this motor on a DR Mad alloy 64mm EDF FAN ,pulls 40Amps & 440Watts on a 3s 2200mah 40c lipo. Will see how long it lasts as i purchased a 2815 used the same lipo and it lasted about 20 flights...Before it fried?.....
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Well balanced, good quality. Felt a bit weak when testing but it manages to spin my 6-blade 50mm EDF pretty good, 31A with 3S. Recommend.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
J'ai achet deux de ces derniers pour une Dynam A-10 que je vais construire. J'ai fait un test de charge statique en utilisant l'ampremtre Turnigy. Dans les gnriques 64mm botiers EDF j'ai achet ici, chaque moteur tire un 26A constant, avec des rafales allant jusqu' 35A lors du dmarrage. J'utilise 40A Plush ESC de 30A ou 35A mais les CES ne serais probablement bien fonctionner. Le modle de boulon a un diamtre 16 mm partir des centres des trous de boulon - 18 mm partir du bord extrieur des trous de boulon. Cela semble tre la norme pour EDF. Les trous vont tout au long de la bride au niveau de la partie infrieure. J'utilise boulons 2.5x8 et ils sont parfaits. Le diamtre hors tout de la bride est de 20 mm et le plus fort de la structure isolante (la bride et la partie centrale plus troite) est 19,5 mm. L'arbre est install 3mm sans mplat. La mienne est venu avec deux arbres supplmentaires - un arbre 2.3mm et un second arbre 3mm avec un endroit plat pour les accessoires / fans qui resserrent sur l'arbre avec une vis de rglage. J'espre que cela aide quelqu'un.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Monter sur rafale avec helice 8 pales verticale au decollage
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Nice engine with good performance and very good quality/price ratio
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Good upgrade for my JeTiger. Plenty of power to do acrobatics. Use it with the Turnigy trust 45A ESC.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Um motor muito bom. Eu instalei um presente na minha stinger depron 64mm com um esc 50A. Com um total lipo Turnigy 3s 2200mah, ele puxa quase 39A e 450W com o HK 64 milmetros ventilador. Com o FED ,vai como uma flesh

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
powerful motor, in a 64mm edf 7 blade give impressive 400 watts.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I used to use the same model with 3600kv and i figured out, that there was not enough thrust. So i changed it with this 4800kv. Now it flies great, i use it with alfamodel A-4 and 60/15 mm fan and 20C 1600 mAh 3S battery.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
43A on a 64mm 5 bladed fan (Stinger EDF 64mm) using a 3s battery.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。