New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

Turnigy 2730无刷电机1500kv

Turnigy 2730无刷电机1500kv

Shipped From:
  • USA
QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 18.69
状态:
有货
SKU:
T2730-1500
WANT FREE SHIPPING? Click here to find out more!
尺寸:32毫米点¯x27毫米,43毫米(带轴)
重量:26克(kv1500)(不包括连接器)
轴直径:3毫米
前轴长度:10毫米
覆膜厚度:2毫米
磁铁型:45SH
推力:290〜410克
道具:7x3.5或更小
ESC:10A
最大电流:4.5〜8A
锂聚合物电池:2-3S



下载数据文件:
TURNIGY电机数据

  • SKU T2730-1500
  • Brand Turnigy
  • 重量 53.0000
  • 长度 65.00
  • 40.00
  • 高度 40.00
  • 千伏(转/ v)的 1500.00
  • 最大电流( A) 9.00
  • 电阻( MH) 0.20
  • 最大电压(V) 13.00
  • 功率(W) 110.00
  • 轴(MM) 3.00
  • 长度B (毫米) 32.00
  • 直径C(毫米) 27.00
  • 可以长深(mm ) 7.00
  • 总长度E(毫米) 42.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

very nice motor, well designed and very durable, because of it's mounting system

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very nice motor, well designed and very durable, because of it's mounting system

Turnigy 2730 1500kv / 3S 8x4,5 Folding Aeornaut Propeller. Installed in a 1,20m EPP Fox-like Foamie. Works after more than 30 flights and even survived some crash landings! *Thumbs up*

https://www.youtube.com/watch?v=k4bPxFAO5Aw

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Turnigy 2730 1500kv / 3S 8x4,5 Folding Aeornaut Propeller. Installed in a 1,20m EPP Fox-like Foamie. Works after more than 30 flights and even survived some crash landings! *Thumbs up*

https://www.youtube.com/watch?v=k4bPxFAO5Aw

Cute little one for my special 1meter fpv wing!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Cute little one for my special 1meter fpv wing!

Bought motor a while ago only just got round to using it but I would recommend the motor for the price it's a great little motor

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought motor a while ago only just got round to using it but I would recommend the motor for the price it's a great little motor

I have one of these on a flying wing and it performs just great. For it's size it has got a lot of punch.

Doesn't seem to get too hot or drain the battery too fast. I am looking around for components for a mini quad and I think that these would be great.

The best thing about this product is the hardware kit you get with it. Even heatshrink! And yes the propsaver does work nice too if you have the right prop on there.

Recommended

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have one of these on a flying wing and it performs just great. For it's size it has got a lot of punch.

Doesn't seem to get too hot or drain the battery too fast. I am looking around for components for a mini quad and I think that these would be great.

The best thing about this product is the hardware kit you get with it. Even heatshrink! And yes the propsaver does work nice too if you have the right prop on there.

Recommended

suoer engine for small parkflayers or 3D flayers

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

suoer engine for small parkflayers or 3D flayers

I like the off red shiny color, with the black strip around the magnet ring. Be careful with the set screw(s) that tighten the motor to the motor mount, they can come out - so keep tight during test runs or vibration can send them falling out.

Also be careful with the wires coming from the motor - I kept bending them to put the motor in and out of a pretty little box, and eventually broke one wire very close to the motor winds, and had to solder it, which was a very minute and delicate operation.
Discovering the broken wire was more difficult, as I thought I had fried the
10A plush ver 3.1 bulletproof esc- with defaults (motor takes a sec to start)
3mm motor shaft - (3.17 bullet prop saver work but can pinch-jam on use wd40 to loosen back collet from cross collapse)
Using a nano 300 2S with 35-70 discharge, and currently a
8x4.3 black plastic cheapo prop - 3D home built 19" wingspan based loosely on slowfly28.

Hovers it nicely and plenty of power for straight up - ready to fly weight w battery and prop is 137 grams.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I like the off red shiny color, with the black strip around the magnet ring. Be careful with the set screw(s) that tighten the motor to the motor mount, they can come out - so keep tight during test runs or vibration can send them falling out.

Also be careful with the wires coming from the motor - I kept bending them to put the motor in and out of a pretty little box, and eventually broke one wire very close to the motor winds, and had to solder it, which was a very minute and delicate operation.
Discovering the broken wire was more difficult, as I thought I had fried the
10A plush ver 3.1 bulletproof esc- with defaults (motor takes a sec to start)
3mm motor shaft - (3.17 bullet prop saver work but can pinch-jam on use wd40 to loosen back collet from cross collapse)
Using a nano 300 2S with 35-70 discharge, and currently a
8x4.3 black plastic cheapo prop - 3D home built 19" wingspan based loosely on slowfly28.

Hovers it nicely and plenty of power for straight up - ready to fly weight w battery and prop is 137 grams.

Very good motor! I use 8*4 Prop and it drains 9A on full throttle and 3s lipo.
Only the wires on the motor break easily.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good motor! I use 8*4 Prop and it drains 9A on full throttle and 3s lipo.
Only the wires on the motor break easily.

These are cracking little motors! I thought i'd try these rather than sticking to the Blue Wonders and although slightly different style they perform just as well! I use x4 of these with 7030 tri blade props on 3s. They warm up but don't overheat. They run consistently with each other and have bags of thrust! **As with any new motor, always check that the mount screws are sufficiently tightened!**

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These are cracking little motors! I thought i'd try these rather than sticking to the Blue Wonders and although slightly different style they perform just as well! I use x4 of these with 7030 tri blade props on 3s. They warm up but don't overheat. They run consistently with each other and have bags of thrust! **As with any new motor, always check that the mount screws are sufficiently tightened!**

Sehr guter Motor - Preis / Leistung ist gut. Immer schn, wenn die Stecker schon dabei sind..

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Sehr guter Motor - Preis / Leistung ist gut. Immer schn, wenn die Stecker schon dabei sind..

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!