New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

Turnigy 3020无刷电机外转子1800kv

Turnigy 3020无刷电机外转子1800kv

Discontinued Product

Please continue searching for a similar product.
SKU:
T3020-1800
WANT FREE SHIPPING? Click here to find out more!
尺寸: 其31mm x23毫米(包括安装)
重量:25g(kv1800)(不包括连接器)
轴直径:3毫米
覆膜厚度:2毫米

规格。
电池:3细胞3S / 11.1V
RPM:1800kv
最大电流:10〜12A
空载电流:7.4V / 0.6A
电流容量:16A / 20秒
内阻:0.145ohm
外形尺寸:12x30mm

:320〜450克
道具:6X3〜9x4.7
ESC:20A
最大电流:14A
电池类型:2〜3S仅
适用于小型室内飞机。
  • SKU T3020-1800
  • Brand Turnigy
  • 重量 49.0000
  • 长度 65.00
  • 38.00
  • 高度 38.00
  • 千伏(转/ v)的 1800.00
  • 最大电流( A) 12.00
  • 电阻( MH) 0.16
  • 最大电压(V) 13.00
  • 功率(W) 100.00
  • 轴(MM) 3.00
  • 长度B (毫米) 16.00
  • 直径C(毫米) 30.00
  • 可以长深(mm ) 5.00
  • 总长度E(毫米) 21.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Using this motor on a HobbyKing reaktor with GWS 6x4 DD prop. Pulling 8.5a at WOT on 2s. It does the job. Only 3 stars because one of the winding wires was broken and had to be soldered before the motor could be used (see same problem on other reviews). Also the prop saver allen screws are so tight that they cannot be removed (believe me I have tried!)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Using this motor on a HobbyKing reaktor with GWS 6x4 DD prop. Pulling 8.5a at WOT on 2s. It does the job. Only 3 stars because one of the winding wires was broken and had to be soldered before the motor could be used (see same problem on other reviews). Also the prop saver allen screws are so tight that they cannot be removed (believe me I have tried!)

Great looking motor, good clean windings, carbon cross mount, good strong magnets and bearings seem smooth. Still have to mount and flight test. My overall rating is only 4 stars due to the fact that a) there is no hardware provided (ie. bullets, shrink, etc.) and b) the cross mount does not come with holes in it for mounting. Other than that, no complaints ;-)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great looking motor, good clean windings, carbon cross mount, good strong magnets and bearings seem smooth. Still have to mount and flight test. My overall rating is only 4 stars due to the fact that a) there is no hardware provided (ie. bullets, shrink, etc.) and b) the cross mount does not come with holes in it for mounting. Other than that, no complaints ;-)

Motor very strong in my scratch built foamie, but burned up H-King 10A esc, anyone else have same problem?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Motor very strong in my scratch built foamie, but burned up H-King 10A esc, anyone else have same problem?

leistungsstarker motor, 200g zieht er entspannt mit 2s senkrecht in die luft

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

leistungsstarker motor, 200g zieht er entspannt mit 2s senkrecht in die luft

this motormount is perfekt for shockflyer, its my second motor and the first is still wirking fine!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this motormount is perfekt for shockflyer, its my second motor and the first is still wirking fine!

The most colourful little motor in my collection!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The most colourful little motor in my collection!

Incredible little motor, i am running this on a Durafly Extra 330sc and it works a treat. plane weighs in at 182g which is a little heavier than recommended weight but who cares with this little motor she prop hangs at less than 1/2 throttle. i am running a 8x4.5 (GWS style) prop on 2s 350mah zippy and a 20amp Turnigy controller. yet to build a thrust tester buti would imagine it would easy pull 400 g. using Watt meter on a static test i was pulling 78 Watts full throttle and 12 amps. Not sure what the Watt rating is for the motor but all seemed to be cool after 30sec.
Thanks Hobbyking for this little awesome number.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Incredible little motor, i am running this on a Durafly Extra 330sc and it works a treat. plane weighs in at 182g which is a little heavier than recommended weight but who cares with this little motor she prop hangs at less than 1/2 throttle. i am running a 8x4.5 (GWS style) prop on 2s 350mah zippy and a 20amp Turnigy controller. yet to build a thrust tester buti would imagine it would easy pull 400 g. using Watt meter on a static test i was pulling 78 Watts full throttle and 12 amps. Not sure what the Watt rating is for the motor but all seemed to be cool after 30sec.
Thanks Hobbyking for this little awesome number.

Good engine fly much power it on 2s with a 9/4.5 prop. After some try this engine worked best with the H-KING 20A Fixed Wing Brushless Speed Controlle.vijf stars











verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good engine fly much power it on 2s with a 9/4.5 prop. After some try this engine worked best with the H-KING 20A Fixed Wing Brushless Speed Controlle.vijf stars











Good engine fly much power it on 2s with a 9/4.5 prop. After some try this engine worked best with the H-KING 20A Fixed Wing Brushless Speed Controlle.vijf stars

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good engine fly much power it on 2s with a 9/4.5 prop. After some try this engine worked best with the H-KING 20A Fixed Wing Brushless Speed Controlle.vijf stars

a little disapointed carbon fiber mount came warped. other than that the motor runs great running on a profile yak with rhino 750 20c. I am getting good verticals and decent 3D performance on gws 7x3.5

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

a little disapointed carbon fiber mount came warped. other than that the motor runs great running on a profile yak with rhino 750 20c. I am getting good verticals and decent 3D performance on gws 7x3.5

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!