New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

TURNIGY 5-7.5A(8〜42V)HV UBEC为Lipoly

TURNIGY 5-7.5A(8〜42V)HV UBEC为Lipoly

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 26.53
状态:
缺货!
SKU:
TR-UBEC7.5
WANT FREE SHIPPING? Click here to find out more!

电源的接收机和舵机与UBEC电源解决方案的最不好的。
所有新Turnigy 7.5A UBEC是一种先进的DC-DC开关稳压器,将提供一个恒定的5A或以上,高达7.5安培短脉冲。该Turnigy UBEC插入一个3 - 10细胞Lipoly包,并提供恒定5或6V至接收机。
该系统包括一个防短路和过热功能用薄金属屏蔽罩,降低噪音
还包括的是一个输出滤波器以减少噪音,一个通/断开关和一降压调节器适配器。
芯片效率为92%。

如果你有一个中型飞机,与标准的伺服系统和想要的惯于退出了坚实的UBEC。这是一个很好的选择。


规格。
输出(恒):5V / 5A或6V / 5A
输入:8V-42V(3-10cell脂)高压
尺寸:48x27x9mm
重量:37克
静态电流:20毫安
类型:开关,但由于一些降噪(超薄金属外壳和滤波器)这个单位给出了相同的噪声线性BEC。


单位配备了完整说明。

  • SKU TR-UBEC7.5
  • Brand -
  • 容量(mAh) -
  • 重量 69.0000
  • 长度 120.00
  • 12.00
  • 高度 110.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This UBEC is excellent for ground operations.. Low noise at 3 - 4 amps. The more amps you draw the more noisier it gets.
If you wanna use it on a multicoper dont buy this , Search Matek or diatone, they are better.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This UBEC is excellent for ground operations.. Low noise at 3 - 4 amps. The more amps you draw the more noisier it gets.
If you wanna use it on a multicoper dont buy this , Search Matek or diatone, they are better.

Worked great on the bench driving servos and RX off a 3S pack, but as soon as I plugged it in to a 6S it gave no output and just heated up. I have had good look with the lower rated Turnigy UBECs in the past, but this one seems to have some issues - will try and get a refund on it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Worked great on the bench driving servos and RX off a 3S pack, but as soon as I plugged it in to a 6S it gave no output and just heated up. I have had good look with the lower rated Turnigy UBECs in the past, but this one seems to have some issues - will try and get a refund on it.

I have used this UBEC on my HK 600GT with Align FBL head, 3GX 6S setup since 2013.
I has worked great for me and has never failed. In 9/6/13 comments I had blame the UBEC for one failure with it but later determined that the crash was cause by a loose battery solder joint which I did poorly. Yesterday I tried this BEC on my Assault 700 with 12S (50v) setup and it worked perfectly without any overheating ( metal case ). I will keep using and monitoring it since the specs say 42 volts max. This UBEC is a winner in my book

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have used this UBEC on my HK 600GT with Align FBL head, 3GX 6S setup since 2013.
I has worked great for me and has never failed. In 9/6/13 comments I had blame the UBEC for one failure with it but later determined that the crash was cause by a loose battery solder joint which I did poorly. Yesterday I tried this BEC on my Assault 700 with 12S (50v) setup and it worked perfectly without any overheating ( metal case ). I will keep using and monitoring it since the specs say 42 volts max. This UBEC is a winner in my book

Solid ESC if you do not need more than 5A. I use it quite often in small planes and helicopters.

Note that for high peak currents (>5A) output voltage drops significantly, adding a large capacitor to the output helps.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Solid ESC if you do not need more than 5A. I use it quite often in small planes and helicopters.

Note that for high peak currents (>5A) output voltage drops significantly, adding a large capacitor to the output helps.

Good quality. On/off switch is handy. Very good.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good quality. On/off switch is handy. Very good.

Very good quality , solid construction . Included is a switch. Easily copes with 8 servos.Currently there are 2 gimbal servos TALON XUAV

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very good quality , solid construction . Included is a switch. Easily copes with 8 servos.Currently there are 2 gimbal servos TALON XUAV

I use it with the Trackstar 200amp 1/5th ESC. If you didn't know the ESC didn't have BEC circuitry, you sure wouldn't be able to tell looking at the truck. Runs 2 high performance servos smoothly. Highly recommend it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use it with the Trackstar 200amp 1/5th ESC. If you didn't know the ESC didn't have BEC circuitry, you sure wouldn't be able to tell looking at the truck. Runs 2 high performance servos smoothly. Highly recommend it.

I use it in F5B, with 6 servos. I've just cut the switch.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use it in F5B, with 6 servos. I've just cut the switch.

I have not had problems. I have not refused at work. Power quality of the receiver and servo larger models.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have not had problems. I have not refused at work. Power quality of the receiver and servo larger models.

Very great and working well with best price

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very great and working well with best price

TURNIGY 5-7.5A (8~42v) HV UBEC.jpg Download [1623]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!