New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

Turnigy 600 H37403无刷先驱者1180kv

Turnigy 600 H37403无刷先驱者1180kv

Discontinued Product

Please continue searching for a similar product.
SKU:
TR37403-1180
WANT FREE SHIPPING? Click here to find out more!

Turnigy 600 H37403无刷先驱者1180kv

550〜600级直升机如对齐T-550雷克斯和HK600一个伟大的运动

规格。
型号:3740
打开:3
细胞:11S
KV:1180rpm / V
空载电流:3.4A / 10V
最大功率:3kw
重量:379克
轴直径:6毫米
外形尺寸:44.1点¯x65毫米
Recomended ESC:100A HV

  • SKU TR37403-1180
  • Brand -
  • 重量 432.0000
  • 长度 95.00
  • 60.00
  • 高度 80.00
  • 千伏(转/ v)的 1180.00
  • 最大电流( A) 75.00
  • 电阻( MH) 0.00
  • 最大电压(V) 40.00
  • 功率(W) 3000.00
  • 轴(MM) 6.00
  • 长度B (毫米) 65.00
  • 直径C(毫米) 44.00
  • 可以长深(mm ) 45.00
  • 总长度E(毫米) 85.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Nice motor for the price. I'm using it on a KDS Innova 550 with a 15T pinion and 4500mah 6S 50C Lipos. Lots of power and very smooth. I'm using a YEP 100A (the early Helidrive version). Timing is set to auto and 8KHz PWM. The motor is quite hot at the end of a flight, but not too hot. You can touch it, but not for very long. I may try manual timing around 5 degrees. I see the new Scorpion HKIII-4025 1100kv 3T motor calls for 8KHz PWM and 5 degrees timing. So all up I'm very pleased with this motor. p.s. make sure you put a bit of thread lock in the motor shaft set screw hole, on the bottom of the motor, to stop it backing out in flight.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice motor for the price. I'm using it on a KDS Innova 550 with a 15T pinion and 4500mah 6S 50C Lipos. Lots of power and very smooth. I'm using a YEP 100A (the early Helidrive version). Timing is set to auto and 8KHz PWM. The motor is quite hot at the end of a flight, but not too hot. You can touch it, but not for very long. I may try manual timing around 5 degrees. I see the new Scorpion HKIII-4025 1100kv 3T motor calls for 8KHz PWM and 5 degrees timing. So all up I'm very pleased with this motor. p.s. make sure you put a bit of thread lock in the motor shaft set screw hole, on the bottom of the motor, to stop it backing out in flight.

. , . , 770Kv - 10S, 4.9A 1.8 10S.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

. , . , 770Kv - 10S, 4.9A 1.8 10S.

Useing this motor with a 13 toogh pinion. lots of power!



Pinion gear = (Target RPM) * (Teeth on main gear) / (Motor KV) / (Voltage) / (Motor efficiency)



2000 (rpm) * 170 (teeth) / 1180 (KV) / 22.2(Voltage) / .96 (ME) = 13.5 Pinion

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Useing this motor with a 13 toogh pinion. lots of power!



Pinion gear = (Target RPM) * (Teeth on main gear) / (Motor KV) / (Voltage) / (Motor efficiency)



2000 (rpm) * 170 (teeth) / 1180 (KV) / 22.2(Voltage) / .96 (ME) = 13.5 Pinion

este sera para nuestro elicoptero 450

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

este sera para nuestro elicoptero 450

Been hearing about people getting 1 or 2 flights before turnigy motors burning up. Do a check of the wires coming out of the motor. This motor I purchased, found 2 out of the 3 wires were cut on the body of the motor and touching the metal. Luckily it was caught before putting it in.

I was able to get some heat shrink tubing on each wire. The edges of the motor around the openings are sharp. So keep an eye out for this.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Been hearing about people getting 1 or 2 flights before turnigy motors burning up. Do a check of the wires coming out of the motor. This motor I purchased, found 2 out of the 3 wires were cut on the body of the motor and touching the metal. Luckily it was caught before putting it in.

I was able to get some heat shrink tubing on each wire. The edges of the motor around the openings are sharp. So keep an eye out for this.

Setup:
HK 600GT
CC ICE 100
Micro Beast FBL
17T piniong
2200 headspead
turnigy 5000mah 6s 20c
max watt 3572W at 160amps
engine temp at about 40deg celcius

I realy like this engine, lots of power :)


verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Setup:
HK 600GT
CC ICE 100
Micro Beast FBL
17T piniong
2200 headspead
turnigy 5000mah 6s 20c
max watt 3572W at 160amps
engine temp at about 40deg celcius

I realy like this engine, lots of power :)


Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!