注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global
  • USA

Turnigy可调12合1工具 - 六角/平/菲利普斯

Turnigy可调12合1工具 - 六角/平/菲利普斯

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 14.62
Rating:
Stock:
重量:
138
SKU:
922000041-0

Price War

产品介绍

该Turnigy可调12合1工具驱动器集包括六角尺寸为1.5,2.0,2.5,3.0毫米和SAE尺寸0.50“,1/16”,3/32“,5/64”。它还包括菲利普斯和扁头螺丝刀位。所有的司机都convenietly存储在不使用时的手柄内。随着摩擦配合动作,实际上你可以选择多少司机位揭露。从短期对于那些紧点,长,当你需要达到深。

手柄是由轻质铝,钢柄驱动。由于它是多么紧凑,Turnigy可调12合1多功能工具驱动器是非常适合在你的领域框或发射器的情况下是一致的。

Product
Specifications

额外信息

  • 商品编号:
    922000041-0
  • Brand:
    Turnigy
  • 重量(g)
    138.00
  • 长度
    135.00
  • 宽:
    20.00
  • 高度:
    20.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
There's a few critical issues with this tool

1) When you are using it, as you twist, it will often slide the circular "door" which keeps the other bits in place inside the handle. They will slide out if you are screwing at an angle or if you put the tool down.

2) That same door is not very comfortable on the palm of your hand - if you use this tool a lot, it's not comfortable.

For emergency field repairs, it's great. But for any semi-regular use... get a real set of drivers.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought this tool to build my Trex 500L kit and i was very happy with it. The tips are not as strong as they could be but if you tighten only as hard as you need to they are fine. The spinning part on the handle to hold the bits can sometimes spin while using so the bits can come out unexpectedly. Neither are a big issue again if you use it as it should be used. I'm happy with it and its nice not having to have a bunch of small allen keys taking up more room with storage than this.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Extremely high quality, I was really surprised; so much better than my previous one and not really that much more expensive.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These screw driver and hex nut driver are excellent quality
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
HM HM HM - would like other bits for the EU Market - not needed imperial size hex - would prefer perhaps bigger a.e. PH1 or a second 1,5 mm hex (knowing it will be needed after time....).

Lever for losen bit, is annoying sometimes.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
wow good!! Turnigy Adjustable 12 in 1 Multi Tool - Hex/Flat/Phillips
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Essential tool. It have every tip you need to repair your helicopter and hold all of them on the handle. A bit heavy but very convenient.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I used these for a while and ruined two of them already. for the price and selection of heads they're good but their main issue is if you used force (like when you tighten something) its either you brake the black base or he locking mechanism that hold the head of your choice in place. its still usable but the head slips out of the driver. I prefer now the separate design (each head on its own driver) might cost more money and space but I think they're more durable.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Surprisingly good quality, the hex size were a little too big with the black coating on. But once the coating is worn off, the hex size fits very well, good thing the coating will wear off on the 1st 3-4 screws. The "friction fit" bit/shaft holder is sturdier than expected but I still wouldn't put too much pressure on it. The extra bits also fits seamlessly into the handle which is good. Overall a bargain considering you get both standard & metric size hex bits, so I can work on my Mugen & Losi with the same tool on the field.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great little tool! Has all of the metric sizes for the Quantum multi rotor frames and never cease to find other uses for it.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。