New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

Turnigy Aerodrive 2205 50T 1070KV无刷7.2A先驱者

Turnigy Aerodrive 2205 50T 1070KV无刷7.2A先驱者

Discontinued Product

Please continue searching for a similar product.
SKU:
244000076-0
WANT FREE SHIPPING? Click here to find out more!

该Turnigy Aerodrive 2205 50T 1070KV电机运行平稳,高品质无刷外转子。允许前端或后端安装,道具可直接安装使用随附的道具保护电机轴或螺栓直接使用附带的适配器电机外壳。
全面的附件包提供,包括一个跨风格的坐骑,道具适配器,道具包裹带3'O'形圈和道具枢纽插入。的备用电机轴和安装/适配器固定螺栓。

在测试此电动机产生的功率80W使得它可以完美的运动和比例模型高达约1磅(450克)AUW。

眼镜:
KV:1070转/ V
工作电流:0.5A〜7.2A
峰值电流:8A
最大功率:80W
细胞计数:2〜3S LiPoly
重量:30g
外形尺寸:27.6点¯x22毫米
轴径:3.175毫米
轴长:13毫米
安装孔尺寸: 前12×12毫米M2 /后16×19毫米M3
建议电池:1300〜1700mAh的3S1P
建议的道具尺寸:9x3.5〜9X4

  • SKU 244000076-0
  • Brand Aerodrive
  • 重量 81.0000
  • 长度 95.00
  • Packaging Width 45.00
  • 高度 55.00
  • 千伏(转/ v)的 1070.00
  • 最大电流( A) 8.00
  • 电阻( MH) 0.00
  • 最大电压(V) 11.00
  • 功率(W) 80.00
  • 轴(MM) 3.00
  • 长度B (毫米) 22.00
  • 直径C(毫米) 28.00
  • 可以长深(mm ) 9.00
  • 总长度E(毫米) 37.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This motor was spot on the listed weight of 30 grams. I installed it in a Twisted Hobbies Crack Beaver. It pulled 8.4 amps maximum on a fully charged 3S 450 mAh 60C Nano with mixed carbon 8x3.8 slow fly prop. This slightly exceeded the maximum 8 amp of the motor and it ran hot after 10 seconds of full power. This motor however pulled my plane straight up in a vertical climb at 3/4 throttle so very little max power will be needed. While this motor was slightly bigger than the recommended 25 gram powerplant I'm very satisfied with it and I will be trying a 7x4 SF on 3S to get it to run within its recommended limits. This is a smooth running and powerful motor and comes with all the needed accessories to get it mounted and best of all it is good value for your money.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This motor was spot on the listed weight of 30 grams. I installed it in a Twisted Hobbies Crack Beaver. It pulled 8.4 amps maximum on a fully charged 3S 450 mAh 60C Nano with mixed carbon 8x3.8 slow fly prop. This slightly exceeded the maximum 8 amp of the motor and it ran hot after 10 seconds of full power. This motor however pulled my plane straight up in a vertical climb at 3/4 throttle so very little max power will be needed. While this motor was slightly bigger than the recommended 25 gram powerplant I'm very satisfied with it and I will be trying a 7x4 SF on 3S to get it to run within its recommended limits. This is a smooth running and powerful motor and comes with all the needed accessories to get it mounted and best of all it is good value for your money.

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save