New Items 新闻 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

Turnigy Aerodrive SK3 - 2122-1570kv无刷电机外转子

Turnigy Aerodrive SK3 - 2122-1570kv无刷电机外转子

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 19.87
状态:
缺货!
SKU:
SK3-2122-1570
WANT FREE SHIPPING? Click here to find out more!

Turnigy SK3电机电机质量和设计的又一次飞跃。我们指示工程师源提供给他们最好的品质磁铁,轴承和材料,并制定马达,它不仅对手,但超越许多领先的汽车质量目前市场上制成品。

其结果是一个高效率,高素质的电机采用优质双屏蔽轴承,烧结钕磁铁和一个字符串绕定子确保准确和一致的线圈每一次。

该Turnigy SK3电机适合谁正在寻求毫不妥协质量无刷电机建模。

眼镜。
打开:8T
电压:2〜3S Lipoly
RPM / V:1570 千伏
内阻:0.14欧姆
最大载重:6A
最大功率:51W
轴直径:2.0毫米
重量:25g
电机插头:2毫米子弹连接器

  • SKU SK3-2122-1570
  • Brand SK3
  • 重量 83.0000
  • 长度 110.00
  • Packaging Width 45.00
  • 高度 81.00
  • 千伏(转/ v)的 1570.00
  • 最大电流( A) 6.00
  • 电阻( MH) 140.00
  • 最大电压(V) 11.00
  • 功率(W) 51.00
  • 轴(MM) 2.00
  • 长度B (毫米) 25.00
  • 直径C(毫米) 21.00
  • 可以长深(mm ) 10.00
  • 总长度E(毫米) 29.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I use this Motor to power my Mini FPV Skywalker (335g). I use a 6x4 Prop, a 3S1000mAh Battery and a 10A ESC. 30pcnt throttle is enough for floating around. Flight time is about 20min with more than 20pcnt left in the Battery. 100pcnt throttle and my Skywalker goes endles straight vertical. On the ground 100pcnt throttle is about 9A of current draw (as fas as I remember). GREAT MOTOR!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this Motor to power my Mini FPV Skywalker (335g). I use a 6x4 Prop, a 3S1000mAh Battery and a 10A ESC. 30pcnt throttle is enough for floating around. Flight time is about 20min with more than 20pcnt left in the Battery. 100pcnt throttle and my Skywalker goes endles straight vertical. On the ground 100pcnt throttle is about 9A of current draw (as fas as I remember). GREAT MOTOR!!

Good buy for the price. Running 2 cell 25-50c 950mah NanoTech Lipo, APC 8 x 3.8 prop 10amp turnigy plush speedy gives 12.04 amps at 92.8watts, perfectly matching the much more expensive Hacker A10-9L. Will 3D a 280gram model OK.
Only Con. Not enough room around screws to place the 0-ring. I did strip the motor and dremel out the frame slightly to clear the o-ring, Now works a treat.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good buy for the price. Running 2 cell 25-50c 950mah NanoTech Lipo, APC 8 x 3.8 prop 10amp turnigy plush speedy gives 12.04 amps at 92.8watts, perfectly matching the much more expensive Hacker A10-9L. Will 3D a 280gram model OK.
Only Con. Not enough room around screws to place the 0-ring. I did strip the motor and dremel out the frame slightly to clear the o-ring, Now works a treat.

With APC 8 x 3.8 SF and fully charged 2s lipo a have got 11.2. After 10 second motor is little worm.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

With APC 8 x 3.8 SF and fully charged 2s lipo a have got 11.2. After 10 second motor is little worm.

Nice motor, but with a problem. I bought two of these for a "EasyTwin" mod. Motor draws 5A at 8V (40W) driving a 6"x4" APC prop static. 5-6A at 11.1V (3S) seems plausible in dynamic conditions. B U T, the screws to hold the prop O-ring are seated so closely to the motor bell cut-out, that you can not fit the O-ring. You have to take out the screws (lock-tite = difficult) and re-fit them inside the O-ring. Not an easy feat given the size of the motor. Check out the photo to see what I mean. Longer screws will on hel a little. Apart from that, a very nice little motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice motor, but with a problem. I bought two of these for a "EasyTwin" mod. Motor draws 5A at 8V (40W) driving a 6"x4" APC prop static. 5-6A at 11.1V (3S) seems plausible in dynamic conditions. B U T, the screws to hold the prop O-ring are seated so closely to the motor bell cut-out, that you can not fit the O-ring. You have to take out the screws (lock-tite = difficult) and re-fit them inside the O-ring. Not an easy feat given the size of the motor. Check out the photo to see what I mean. Longer screws will on hel a little. Apart from that, a very nice little motor.

motor forte e pequeno ideal para parkflyer e 3d feito em depron.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

motor forte e pequeno ideal para parkflyer e 3d feito em depron.

Very nice motors. Great package :) I use them in my Micro Quad by JR65 (25cm - longest (diagonal) distance between motors). Ideal for 5" or 6" props. Distance between screw mounts is 14mm. No female connectors (not needed in my case, I soldered it directly to ESC).

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice motors. Great package :) I use them in my Micro Quad by JR65 (25cm - longest (diagonal) distance between motors). Ideal for 5" or 6" props. Distance between screw mounts is 14mm. No female connectors (not needed in my case, I soldered it directly to ESC).

Looks good. Spins well. Comes with 3 male 2 mm connectors, but they don't include the 3 females! Then the instructions say to be sure not to modify the wiring! So now I wait for some 2 mm female connectors! Should be included with the motor. My LHS doesn't sell that size. Now it will be a month before I can comment on the quality.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Looks good. Spins well. Comes with 3 male 2 mm connectors, but they don't include the 3 females! Then the instructions say to be sure not to modify the wiring! So now I wait for some 2 mm female connectors! Should be included with the motor. My LHS doesn't sell that size. Now it will be a month before I can comment on the quality.

i only say about this motor is WOWW.... this have the same design as hacker a10 series. this turnigy sk3 is a real deal best looking motor for foamies have same power and punch like hacker a10 9l magnet are superb and quality is superb iam using it with 2s 460 nanotech with 12amp plush esc it pull the plane to ultimate limit my model weight 170 grams with battery highly recommended !!!!! if u can then grab 2 atleast!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i only say about this motor is WOWW.... this have the same design as hacker a10 series. this turnigy sk3 is a real deal best looking motor for foamies have same power and punch like hacker a10 9l magnet are superb and quality is superb iam using it with 2s 460 nanotech with 12amp plush esc it pull the plane to ultimate limit my model weight 170 grams with battery highly recommended !!!!! if u can then grab 2 atleast!!!

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking