注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global
  • USA

Turnigy Aerodrive SK3 2822年至1275年无刷外转子与短轴

Turnigy Aerodrive SK3 2822年至1275年无刷外转子与短轴

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 16.06
Rating:
Stock:
重量:
59
SKU:
9192000076

Price War

产品介绍

Turnigy SK3电机电机质量和设计的又一次飞跃。我们指示工程师源提供给他们最好的品质磁铁,轴承和材料,并制定马达,它不仅对手,但超越许多领先的汽车质量目前市场上制成品。

其结果是一个高效率,高素质的电机采用优质双屏蔽轴承,烧结钕磁铁和一个字符串绕定子确保准确和一致的线圈每一次。

该Turnigy SK3电机适合谁正在寻求毫不妥协质量无刷电机建模。

注意:这个版本有一个冲洗长度轴-适用于小型Quadracopter项目!易溶于四架挂载。请参考图像。

眼镜。
打开:40T
电压:2〜3S Lipoly
RPM / V:1275 千伏
内阻:0.185欧姆
最大载重:8A
最大功率:95W
轴直径:3.0毫米
重量:31克
电机插头:φ3.5mm子弹连接器

包括:道具适配器

Product
Specifications

额外信息

  • 商品编号:
    9192000076
  • Brand:
    Turnigy
  • 重量(g)
    59.00
  • 长度
    110.00
  • 宽:
    45.00
  • 高度:
    85.00
  • 千伏(转/ v)的
    1275.00
  • 最大电流( A)
    8.00
  • 功率(W):
    95.00
  • 长度B (毫米):
    20.00
  • 可以长深(mm )
    7.00
  • 最大电压(V)
    13.00
  • 轴(MM):
    3.00
  • Unit Weight (g):
    31
  • 直径C(毫米)
    28.00
  • 总长度E(毫米)
    22.00
  • 电阻( MH):
    0.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Nice engine, my standard engine for light twin ESA/EPA planes. I use two one with a 7x5APC and a 3S 2200mAh Zippy compact for 7 minutes at full throttle
Quality
Value
Overall
Quality
Value
Overall
i use it with 8045 props and works very well, quite and powerfull
Quality
Value
Overall
Quality
Value
Overall
super powerful on the scorpion Y6 frame, even using the flimsy glow in the dark props
Quality
Value
Overall
Quality
Value
Overall
These are very good motors. They run smooth and efficient with 8045 SF props on my SK450 quadcopter. I like how 3mm bullet plugs come pre-soldered! The best thing about these motors is that they only draw a max of 8 Amps! You only need 10A ESCs, but I use 15A multistar ESCs for extra safety (and they come with 3mm bullets). All in all a very good motor!
Quality
Value
Overall
Quality
Value
Overall
Beginners mistake. Ran these with a 30A turnigy plush speed controller, so they got mighty hot. Will order some 10A which look more suitable according to pls comments. Using a kk2.0 board, which needed firmware upgrade before the motors ran in all at once. Smooth motor. Good power on my dead cat - although not sure how it will run with 10A speed controllers. One downside, the 3 small screws (M1.5 hex)!for the prop mount are weak. Snapped some from over tightening, then I learnt my lesson, but the some snapped after one crash, and another whilst in flight. Recommend you replace these with strong bolts. Bullet connectors are 3.5mm, but I had to first give them a squeeze with needle tip pliers to get them to fit the gold connectors I purchased.
Quality
Value
Overall
Quality
Value
Overall
My favourite motors for F330 frames. Real smooth and with 3S 25Cplus LiPOs they have nice punch with 8045 props.
Quality
Value
Overall
Quality
Value
Overall
Good motor. I bough 5 for a quad, one is kind stuck, so I left it for a later replace if needed. It has good performance with 8x4.5 and I got over 12 mins flight with a 800g quad (33cm frame). Although all the motors seems slightly 'lose' on the bearings since I can move it side ways.
Quality
Value
Overall
Quality
Value
Overall
Using these with the hobbyking blue 12a esc, f330 frame and kk2 with a 3s lipo. Nothing to complain about. Bought 5, one as a spare, had a few good crashes and these are still going like new. Only negative is these should come with lock nuts as I had a prop fly off, lucky it hadn't lifted of the ground yet.
Quality
Value
Overall
Quality
Value
Overall
Nice motor design, but 1 out of 5 was bad, only 2 were real smooth.
Quality
Value
Overall
Quality
Value
Overall
recently put these on my quad. Nice fit and finish, well balanced and quiet with good bearings. not the most powerful motors out, but forgiving to learn on.
Quality
Value
Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。