注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global
  • USA

Turnigy Aerodrive SK3 - 2826-980kv无刷电机外转子

Turnigy Aerodrive SK3 - 2826-980kv无刷电机外转子

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 23.17
Rating:
Stock:
重量:
113
SKU:
SK3-2826-980

Price War

产品介绍

Turnigy SK3电机电机质量和设计的又一次飞跃。我们指示工程师源提供给他们最好的品质磁铁,轴承和材料,并制定马达,它不仅对手,但超越许多领先的汽车质量目前市场上制成品。

其结果是一个高效率,高素质的电机采用优质双屏蔽轴承,烧结钕磁铁和一个字符串绕定子确保准确和一致的线圈每一次。

该Turnigy SK3电机适合谁正在寻求毫不妥协质量无刷电机建模。

眼镜。
打开:30T
电压:2〜3S Lipoly
RPM / V:980 千伏
内阻:0.174欧姆
最大负荷:10A
最大功率:96W
轴直径:3.0毫米
螺栓孔:16毫米&19毫米
螺栓螺纹:M3
重量:44克
电机插头:φ3.5mm子弹连接器

Product
Specifications

额外信息

  • 商品编号:
    SK3-2826-980
  • Brand:
  • 重量(g)
    113.00
  • 长度
    110.00
  • 宽:
    45.00
  • 高度:
    80.00
  • 千伏(转/ v)的
    980.00
  • 最大电流( A)
    10.00
  • 功率(W):
    96.00
  • 长度B (毫米):
    28.00
  • 可以长深(mm )
    12.00
  • 最大电压(V)
    11.00
  • 轴(MM):
    3.00
  • Unit Weight (g):
    44
  • 直径C(毫米)
    28.00
  • 总长度E(毫米)
    40.00
  • 电阻( MH):
    174.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Used on a Phoenix 2000 glider. After 5 flights, I tryied to put full throttle for 1mn. The motor overheted and burned.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Der Motor hat exakt die gleichen Daten wie der Hacker A20-30M (30 Turns; 980kV; 0,174 Ohm) und hat in der Praxis auch die gleichen Leistungsdaten. Bei Betrieb mit einem vollen 3s Lipo nimmt er 11,5 A mit einem 9x4,7 Prop. Ein wirklich guter Motor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Only three flights so far but pleased. Use it on a 400g Crack Yak Big from RC Factory together with a YEP 20A ESC. Very smooth and fast response, the Yak climbes effortless using 10x4.7 so far but have 10x3.8 to be tested as well.
So far I recommend it. Only negative is that shaft the wrong way for most planes so prop saver cannot be used.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Better than NTM motors, works great with my Q450, 3S 2650mah lipo, 10X4.5 cheap props and SimonK flashed 30 ESC's (and you can get replacement bearings!)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Havent yet run these but they seem okay. I would buy these over Tmotors anyday
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have a number of sk3's in the 28mm range and have found them to be well designed, 'pretty',and quite robust and durable. I have plowed them into old tera ferma many times and have been amazed that, except for a few scratches, they have come through to fly again. Their cost is a bit more but you get what you pay for with sk3's. Power to size and weight is excellent also. Great price too- compare at your LHS and this motor would run $30 to $40. Thanks Turnigy and HK for another fine product.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very nice. Combined with HK 12A Blue ESCs and 8x4.5 props on a 550mm DIY stick quad. The frame, bare, came out to 230g. So it is a light quad. The motors are barely warm to the touch, same with the ESCs. Flight time is decent. the motors have been consistent performers over 7-8 sessions. No odd behaviors or sounds. Thanks.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I was a little concerned about this motor after I placed my order, but that all changed once I sent my bird on its maiden flight. I installed this motor on the hummer epp 3D plane which weighs about 450 grams. After the maiden, (8-10 min of flight), I checked my set-up for heat, and everything was cool to the touch. Overall, I am very happy with this motor. It is a nice little efficient package for my set-up. I am running it with a 3cell 1100 man batt, a 25-30 esc (over the top), and a 1047SF prop.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Ich habe 6 dieser Motoren bestellt. Innerhalb von krzester Zeit mit GLS geliefert. Verwendet werden sie in einem Hexacopter. Als Prop benutze ich einen Standart GWS Slowfly von HK.
Die Motoren sind ausgezeichnet gewuchtet und von sehr guter Qualitaet.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
iuse them on my mini quadcopter works great no bearing issues runs flawless
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Drawing download now [85.91Kb]

产品标签

使用空格分隔标签。使用单引号(')标注词组。