New Items 新闻 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

Turnigy Aerodrive SK3 - 2830-1020kv无刷电机外转子

Turnigy Aerodrive SK3 - 2830-1020kv无刷电机外转子

Shipped From:
  • USA
  • Global
QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 28.68
状态:
有货
SKU:
SK3-2830-1020
WANT FREE SHIPPING? Click here to find out more!

Turnigy SK3电机电机质量和设计的又一次飞跃。我们指示工程师源提供给他们最好的品质磁铁,轴承和材料,并制定马达,它不仅对手,但超越许多领先的汽车质量目前市场上制成品。

其结果是一个高效率,高素质的电机采用优质双屏蔽轴承,烧结钕磁铁和一个字符串绕定子确保准确和一致的线圈每一次。

该Turnigy SK3电机适合谁正在寻求毫不妥协质量无刷电机建模。

眼镜。
打开:20T
电压:2〜3S Lipoly
RPM / V:1020 千伏
内阻:0.11欧姆
最大负荷:18A
最大功率:168W
轴直径:3.0毫米
螺栓孔:16毫米&19毫米
螺栓螺纹:M3
重量:58克
电机插头:φ3.5mm子弹连接器

  • SKU SK3-2830-1020
  • Brand SK3
  • 重量 129.0000
  • 长度 110.00
  • Packaging Width 45.00
  • 高度 80.00
  • 千伏(转/ v)的 1020.00
  • 最大电流( A) 18.00
  • 电阻( MH) 110.00
  • 最大电压(V) 11.00
  • 功率(W) 168.00
  • 轴(MM) 3.00
  • 长度B (毫米) 32.00
  • 直径C(毫米) 28.00
  • 可以长深(mm ) 16.00
  • 总长度E(毫米) 44.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Winding insulation, very bad. I use 40Amp ESC , and after two crashes, I lost two motors, because of blocking propelers. Smell bad !

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Winding insulation, very bad. I use 40Amp ESC , and after two crashes, I lost two motors, because of blocking propelers. Smell bad !

These are an excellent smooth motor. I am using them on my quad in combination with simonk flashed Blueseries.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These are an excellent smooth motor. I am using them on my quad in combination with simonk flashed Blueseries.

rn gzel bir ambalajla aksesuarlar ile beraber geliyor. Multicopter iin almtm ve eer sk450 quadcopter frame alacaksanz, frame'i modifiye etmeniz gerekiyor. Aksi halde motor mili montaja izin vermiyor. Ben beenerek kullandm. Bir krmdan sonra motor millerinde hafif bir yamulma olduunu hissettim ve o haliyle ok ucuza sattm. Tabi satarken krmdan bahsettim.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

rn gzel bir ambalajla aksesuarlar ile beraber geliyor. Multicopter iin almtm ve eer sk450 quadcopter frame alacaksanz, frame'i modifiye etmeniz gerekiyor. Aksi halde motor mili montaja izin vermiyor. Ben beenerek kullandm. Bir krmdan sonra motor millerinde hafif bir yamulma olduunu hissettim ve o haliyle ok ucuza sattm. Tabi satarken krmdan bahsettim.

Ordered one for an electrifly nieuport 11, very satisfied by the engine. well engineered, complete accessories, and a nice packing (i know we don't fly the box, but that's a pleasure to open it). Connected to a plush 20 , a 1650 3s , and 10x5 APC style
Regarding my appliance, a bipe weighting about 700 g, the engine is overpowering, i take off half throttle, fly on a third or a fourth.
I see this motor really matching the specs, no doubt i will buy another one for my next dare sopwith tripe. Shall i say i recommend it ?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ordered one for an electrifly nieuport 11, very satisfied by the engine. well engineered, complete accessories, and a nice packing (i know we don't fly the box, but that's a pleasure to open it). Connected to a plush 20 , a 1650 3s , and 10x5 APC style
Regarding my appliance, a bipe weighting about 700 g, the engine is overpowering, i take off half throttle, fly on a third or a fourth.
I see this motor really matching the specs, no doubt i will buy another one for my next dare sopwith tripe. Shall i say i recommend it ?

I place that motor in my Pitts and now flyies very fast with prop 10x5. Very strong motor for the size

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I place that motor in my Pitts and now flyies very fast with prop 10x5. Very strong motor for the size

seems like a good motor, just dont expect to use the bottom housing mounts, the screws are so thin a baby would strip them. also the wires come out of the housing in different holes in relation to the mounting plate between motors.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

seems like a good motor, just dont expect to use the bottom housing mounts, the screws are so thin a baby would strip them. also the wires come out of the housing in different holes in relation to the mounting plate between motors.

I buy it to replace the extra 260 motor. amazing quality for the price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I buy it to replace the extra 260 motor. amazing quality for the price.

I always re-wind Turnigy motors when I buy them, but I cannot figure out how to disassemble this one. I removed the circlip on the back, but the shaft remains firmly within the bearing tube. Is there a hidden circlip, or is the shaft glued to the bearings?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I always re-wind Turnigy motors when I buy them, but I cannot figure out how to disassemble this one. I removed the circlip on the back, but the shaft remains firmly within the bearing tube. Is there a hidden circlip, or is the shaft glued to the bearings?

Very nice motor. It is a comparable motor to the Turnigy 2213/20. 61g with 3,5mm gold connectors and the prop holder (fixed with 3 screws). The 3 screws are not the best quality, so don't screw them too strong, or the winding will break. I have measured this motor (and the Turnigy 2213/20) with my Eagletree gear and uploaded the data to drivecalc. You can use this program to try different props. and find the right configuration. (Turnigy SK3 2830-1020 - timing med) perfect motor for quadcopters: measured for example following combination: Turnigy Platinum 40A ESC;
APC SF 10x3,8 Prop.; Voltage: 11,24V; Current: 18,76A; RPM: 7912; thrust: around 1100g

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Very nice motor. It is a comparable motor to the Turnigy 2213/20. 61g with 3,5mm gold connectors and the prop holder (fixed with 3 screws). The 3 screws are not the best quality, so don't screw them too strong, or the winding will break. I have measured this motor (and the Turnigy 2213/20) with my Eagletree gear and uploaded the data to drivecalc. You can use this program to try different props. and find the right configuration. (Turnigy SK3 2830-1020 - timing med) perfect motor for quadcopters: measured for example following combination: Turnigy Platinum 40A ESC;
APC SF 10x3,8 Prop.; Voltage: 11,24V; Current: 18,76A; RPM: 7912; thrust: around 1100g

Overall nice little motors, let down by poor quality control... I bought 6 for my Y6 multicopter, but 2 have very rough bearings and one of those two had poorly tapped holes on the top of the bell for mounting the alternative prop adaptor - I had to use sleeve lock and some epoxy on the adaptor to hold it firmly in place.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Overall nice little motors, let down by poor quality control... I bought 6 for my Y6 multicopter, but 2 have very rough bearings and one of those two had poorly tapped holes on the top of the bell for mounting the alternative prop adaptor - I had to use sleeve lock and some epoxy on the adaptor to hold it firmly in place.

  1. 1
  2. 2

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking