注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global
  • USA

Turnigy Aerodrive SK3 - 2836-1040kv无刷电机外转子

Turnigy Aerodrive SK3 - 2836-1040kv无刷电机外转子

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 30.48
Rating:
Stock:
重量:
156
SKU:
SK3-2836-1040

Price War

产品介绍

Turnigy SK3电机电机质量和设计的又一次飞跃。我们指示工程师源提供给他们最好的品质磁铁,轴承和材料,并制定马达,它不仅对手,但超越许多领先的汽车质量目前市场上制成品。

其结果是一个高效率,高素质的电机采用优质双屏蔽轴承,烧结钕磁铁和一个字符串绕定子确保准确和一致的线圈每一次。

该Turnigy SK3电机适合谁正在寻求毫不妥协质量无刷电机建模。

眼镜。
打开:12T
电压:2〜3S Lipoly
RPM / V:1040 千伏
内阻:0.075欧姆
最大负荷:28A
最大功率:335W
轴直径:3.175毫米
螺栓孔:16毫米&19毫米
螺栓螺纹:M3
重量:80g
电机插头:φ3.5mm子弹连接器

Product
Specifications

额外信息

  • 商品编号:
    SK3-2836-1040
  • Brand:
  • 重量(g)
    156.00
  • 长度
    110.00
  • 宽:
    45.00
  • 高度:
    80.00
  • 千伏(转/ v)的
    1040.00
  • 最大电流( A)
    28.00
  • 功率(W):
    335.00
  • 长度B (毫米):
    40.00
  • 可以长深(mm )
    23.00
  • 最大电压(V)
    11.00
  • 轴(MM):
    3.18
  • Unit Weight (g):
    80
  • 直径C(毫米)
    28.00
  • 总长度E(毫米)
    54.00
  • 电阻( MH):
    75.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Great motor works well as a replacment for the bixler
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This motor is crap!! My setup is a 50amp ESC, nano-tech 1300maH 45-90C discharge and 10x4.5 prop. I put it at full throttle and not even a minute in the motor burned up. For those that said they ran a 10x7 with no problem, I find that hard to believe. I have had bad luck with the quality of electronic parts from Hobby King. You get what you pay for.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Gegenber dem Vorbild Hacker A20-12XL V2 (den ich schon mal besa, allerdings in der Version V1, aber verkauft ist verkauft...) hat der Motor 2g Mehrgewicht (forget it!). Der Ri von 75mOhm (wie Original) wurde nicht erreicht, lt. meinen Messungen sind es 90 mOhm. Die 1040 rpm/V werden auch nicht erreicht, im typischen Spannungsbereich von 10-11V sind es 1140 rpm/V. Immerhin, der Leerlaufstrom von 1,2A wird von Hacker bei 8,4V genannt, ich habe dies erst im Bereich von 10,8V erreicht, das spricht fr die Qualitt der Bleche, insbesondere da die kV etwas hher ist! Angesichts des viel geringeren Preises geht das fr meine Bedrfnisse (Einbau in den eigentlich leichten Hoellein Inside (SPW 2,9m) vllig in Ordnung, aber als Inside 3.7 oder 3.8 (noch nicht fertig) mit etwas Mehrgewicht (wie viel blo?!) muss kann sehen.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Pura potencia estos motores!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Motor ist top. Mit SLS-1250/40C 3S Lipo, an Aeronat Light 10x5 = 28A bei 11,6V => 325W..! Vision-EP (870mm), 642g, Schub max: 1260g, also senkrecht ohne Ende! Temp, bei normalem Kunstflug, 5min. max 50*C. Also passt optimal, l*uft leise und sauber rund! Perfekt.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
kleines motrchen. werde es mit 10x6 klappschraube betreiben. 11x6 geht grenzwrtig mit 33A wurde im rc-network gemessen.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The motor is very good and very powerful, the problem is the X-mount: it's to thin and fragile.
It's the same motor mount you get for those smaller motors, adequate for a thrust of ~300g, but this thing is rated 330W: my X-mount has bended 2 times and finally broke.

Do consider that the motor is quite heavy, the cables are quite fragile (one broke inside of the motor, a real nightmare to repair as you can not completely dismount the back) and finally the motor shaft is quite thin for such a power rating. So also consider a 3530 SK3 (bigger shaft and stronger mount), or maybe a cheaper / lower KV / lighter 3536 Turnigy.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Minus: My motor came unbalanced from the factory (I could feed it's movement during rotation) and shaft bent first time it touched the ground. It's my 3rd SK3 so I'm bit surprised and disappointed :(
Plus: It runs cold under load and bearings are nice and quiet. Full set of accessories in the box.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
LOL!!! PERFECT fits to Bix3. According to me The best motor for it. With 9x6E APC i can fly with 5-6A at cruise. You will NOT need external motor mound for it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
No issues with this motor. Running 9 x 4.5 APC E prop, 4s battery, 40 amp ESC. On the edge for watt rating but zero issues so far.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Drawing download now [89.96Kb]

产品标签

使用空格分隔标签。使用单引号(')标注词组。