Turnigy SK3电机电机质量和设计的又一次飞跃。我们指示工程师源提供给他们最好的品质磁铁，轴承和材料，并制定马达，它不仅对手，但超越许多领先的汽车质量目前市场上制成品。其结果是一个高效率，高素质的电机采用优质双屏蔽轴承，烧结钕磁铁和一个字符串绕定子确保准确和一致的线圈每一次。该Turnigy SK3电机适合谁正在寻求毫不妥协质量无刷电机建模。 Specs.Turns：12TVoltage：3〜4S LipolyRPM / V：1000kvInternal电阻：0.031 OhmMax装载：45AMax功率：670WShaft直径：5.0mmBolt孔：25mmBolt螺纹：M3Weight：141gMotor插头：φ3.5mm子弹连接器
Unit Weight (g):
I had the opportunity to compare this motor to the SK3 new version 2 motor with reversed shaft with the same setup in the same plane. Yep 60A ESC, 13x6 APC Electricprop, Hobbyking EPP YAK 55M, 1,25m wingspan. This motor is the absolute looser versus the newer the Version 2 Motor with the exact same specifications. It has only 70pcnt Power and runs really not smooth and is also much louder than his V2 brother. I do not know why thismotor has such a lower performance, but the newer Version 2 of this motor is the absolute winner in all cases. I will only buy the SK3 Version2 Motors in the future, for almost the same price they ran awesome smooth and have a really good punch.Very good engine to power a glider-type HERON, weighing 1.7kg in FPV.
Propeller 12 * 6 with a 3700ma battery in 3s, it gives 38A.
And the model climbs at an angle of 80 .
1:00 flight.Arrived well packed and in great condition. This will be installed in a scale RC boat and there are no regrets with the choice. Fine looking product.Good Motor, Looks like very good Workmanship. Mounted in my Phoenix Rainbow (Trainer, 1,6m, 2.1kg
Multiplex Multicont 54A, Wellpower 2600-35C-3S, 12x6 APC-E, 43A, 8500 U/min
YEP-60A, Zippy 3000-25C-4S, 10x4 APC, 35A, 12200 U/min (prop can be bigger, but the power is enough for this plane)
Also measured, with Multiplex Multicont 54A, Wellpower 2600-35C-3S
Free Running, 2A, 12380 U/min
10x4 APC, 23A, 10200 U/min
11x5.5 APC-E, 32A, 9360 U/min
11x7 APC-E, 37A, 9200 U/min
Quality seems good. There is a lot of difference (dimensonal) with 800kv model.
Mine have 4mm shaft. Why? Spare part accessories has wrong collet (it is for 5mm shaft). Adpter with 3 hole is different from 800kv model. Why is there a lot of difference with 800kv model? I bought for change 800kv model from my sebart shark but I haveto do some work in the model for fit it (holes in the fire wall is not the same)used this motor in Extrem Flight LASER 48 EXP
With 13x6 prop and 2200mah battery
good power, enough for torque roll but keep your aircraft light...!
quality seems good
one problem, prop hub is not textured and will rip and turn when you try to tighten your prop bolt.Great motor on my edge 540t with 3 s 2700 mah 40c weight 1,2 kg
with 12x6 watt 327 31 ampere
with 13x6,5 watt 430 38 ampere
wot about 6/7 minutes of acrobatic flyGreat motor. This is my 3rd SK3 motor and they are all running perfectly. This is powering my Edge 540T EPP. WIth a 13x6.5 APC it is pulling 46A and putting out 475W. Plenty of power for the plane.Excellent engine
Lipo 4S :
11x6 folding propeller 50 A Number of tours per minute: 10400
10x6 folding propeller 34 A Number of tours per minute: 12450
11x6 folding propeller 33 A Number of tours per minute: 9000
I Run this motor on a Multiplex Mentor with a Plush 60 on 3S and have been very happy with it. She pulls 45 amps with a APC 13x6.5 and 44 amps with a 12x8. I like the 12x8 a little better. Gives me a bit more top end but still pulls nice. I get a little over 8 minutes on a 3300 pack flying mostly 1/2 to 2/3 throttle.