注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global

Turnigy Aerodrive SK3 3548-1050kv无刷电机外转子

Turnigy Aerodrive SK3 3548-1050kv无刷电机外转子

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 52.90
缺货!
Rating:
Stock:
OUT OF STOCK
重量:
272
SKU:
9192000255-0

Price War

产品介绍

Turnigy SK3无刷​​电机还没有在运动演变又向前迈进了一步。

我们再次指示我们的工程师开发的电机,它不仅对手,但使用可用的最优质的磁铁,轴承和材料今天超越的领先电机的质量在市场上。

其结果是一个优秀的系列高效,强大和最挑剔的建模足够强大的电机。

所有SK3系列使用质量双屏蔽轴承,烧结钕磁铁和一个线绕定子(市售永久磁铁的最强型),以确保准确和一致的绕组每一次。

该Turnigy SK3电机适合谁正在寻求毫不妥协一个高质量的无刷电机建模。

特征:
•双屏蔽轴承
•烧结钕磁铁
•串绕定子
•高光洁度
•超级平稳运行

眼镜:
电压:11.1〜16.8V(3〜4S LiPoly)
RPM / V:1050kv
最大功率:820W
最大电流:50A
待机电流:0.016A
阻力位:18mh
:5毫米
螺栓孔间距:25 x 25mm的
螺栓螺纹:M2.5
插头:φ3.5mm子弹
建议ESC:70A
电机尺寸:37×42毫米
重量:167克

包括:
发动机
骑马与螺丝
道具适配器

Product
Specifications

额外信息

  • 商品编号:
    9192000255-0
  • Brand:
    Turnigy
  • 重量(g)
    272.00
  • 长度
    110.00
  • 宽:
    45.00
  • 高度:
    80.00
  • 千伏(转/ v)的
  • 最大电流( A)
  • 功率(W):
  • 长度B (毫米):
  • 可以长深(mm )
  • 最大电压(V)
  • 轴(MM):
  • Unit Weight (g):
    167
  • 直径C(毫米)
  • 总长度E(毫米)
  • 电阻( MH):
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Hi RC Friends. Just a heads up before you buy one of these excellent motors.

After about 15 to 20 flights varying from 2mins to 5.30mins on a 4cell Zippy 2650 25C battery I noticed a change in the 'noise' coming from the motor which normally ran very quietly.
On stripping it down I found the 2 front bearings were worn out completely, very gritty, and the rear bearing was still smooth. This was exactly the same with my previous 3542-840kv motor with much less flight time. I can only say that the blog regarding the excellence of these bearings is false and at the least, very misleading. I have had to replace these bearings which cost about $8 to $10 each at my local brg shop. Most annoying. I suggest all who buy this motor/s should change the front 2 bearings before flying. It's easy to do. Remove the rear collett and simply pull the rotor from the stator. Be careful when re-assembling as the magnets are strong and can pinch you fingers as it snaps together. Prevent this by holding each part firmly and bring together slowly.
The bearing size is: 8mm O/D x 5mm I/D x 2.5mm wide with metal seals both sides.
Turnigy should review the dubious quality of these small bearings.
Both motors have been used in my control line Oriental weighing 1.5Kg and flys well, pulling 380W, 24A, 40deg C. 55mph on a 10x6 APC-E prop.

Big O
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。