New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

Turnigy Aerodrive SK3 - 4240-530kv无刷电机外转子

Turnigy Aerodrive SK3 - 4240-530kv无刷电机外转子

Shipped From:
  • USA
  • Global
QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 49.77
状态:
有货
SKU:
SK3-4240-530
WANT FREE SHIPPING? Click here to find out more!

Turnigy SK3电机电机质量和设计的又一次飞跃。我们指示工程师源提供给他们最好的品质磁铁,轴承和材料,并制定马达,它不仅对手,但超越许多领先的汽车质量目前市场上制成品。

其结果是一个高效率,高素质的电机采用优质双屏蔽轴承,烧结钕磁铁和一个字符串绕定子确保准确和一致的线圈每一次。

该Turnigy SK3电机适合谁正在寻求毫不妥协质量无刷电机建模。

眼镜。
打开:14T
电压:4〜5S Lipoly
RPM / V:530kv
内阻:0.023欧姆
最大负荷:46A
最大功率:795W
轴直径:5.0毫米
螺栓孔:25毫米
螺栓螺纹:M3
重量:194克
电机插头:φ3.5mm子弹连接器

  • SKU SK3-4240-530
  • Brand SK3
  • 重量 338.0000
  • 长度 135.00
  • 60.00
  • 高度 90.00
  • 千伏(转/ v)的 530.00
  • 最大电流( A) 46.00
  • 电阻( MH) 23.00
  • 最大电压(V) 19.00
  • 功率(W) 795.00
  • 轴(MM) 5.00
  • 长度B (毫米) 50.00
  • 直径C(毫米) 42.00
  • 可以长深(mm ) 23.00
  • 总长度E(毫米) 70.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Just received the motor, very disappointed in the quality of the supplied hardware. Why are these motors not supplied with socket head bolts for both mounting the prop adapter and motor mounts, further the prop adapter is too light for a motor of this rated power driving a 14X7 prop on a 5S system. further the bullet connectors are too small to fit my 3.5mm connectors on the ESC. A lot of fiddling about to get it right, I will report once the motor is in service. My recent purchase of a SK3 motor was also disappointing in the same area, though it performs brilliantly in the air.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just received the motor, very disappointed in the quality of the supplied hardware. Why are these motors not supplied with socket head bolts for both mounting the prop adapter and motor mounts, further the prop adapter is too light for a motor of this rated power driving a 14X7 prop on a 5S system. further the bullet connectors are too small to fit my 3.5mm connectors on the ESC. A lot of fiddling about to get it right, I will report once the motor is in service. My recent purchase of a SK3 motor was also disappointing in the same area, though it performs brilliantly in the air.

Nice one. But too bad there is no manual and advices for setting the timing and switching Frequency.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice one. But too bad there is no manual and advices for setting the timing and switching Frequency.

Motor ist hochwertig verarbeitet und leistungsstark. An Zippy 5s und Aeronaut CC PP 14x8 Stomaufnahme im Stand 43A. Leider passt der Propadapter nicht zum Motor, da nur M6 und 24mm lang, also viel zu kurz. Es ist der gleiche Propadapter wie bei den 35xx Motoren. Schade !!! Wnschenswert bei dieser Motorengre wre ein Adapter mit mindestens 35mm Lnge und M8 Gewinde.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Motor ist hochwertig verarbeitet und leistungsstark. An Zippy 5s und Aeronaut CC PP 14x8 Stomaufnahme im Stand 43A. Leider passt der Propadapter nicht zum Motor, da nur M6 und 24mm lang, also viel zu kurz. Es ist der gleiche Propadapter wie bei den 35xx Motoren. Schade !!! Wnschenswert bei dieser Motorengre wre ein Adapter mit mindestens 35mm Lnge und M8 Gewinde.

So far so good, after I set the timing to 15deg I am getting 45amps and about 950w on 5 cells with 15x8. Will test fly soon

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

So far so good, after I set the timing to 15deg I am getting 45amps and about 950w on 5 cells with 15x8. Will test fly soon

SK3-4240(DT3520-14P) MOTOR (edited).pdf Download [122]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save