New Items 新闻 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

Turnigy Aerodrive SK3 - 6364-213kv无刷电机外转子

Turnigy Aerodrive SK3 - 6364-213kv无刷电机外转子

Shipped From:
  • USA
  • Global
QTY:

Now save 保存 AU$ 38.57 AU$ 38.57

Special Price AU$ 64.82 AU$ 64.82

You save 保存 AU$ 38.57 AU$ 38.57

Was  AU$ 103.39

状态:
有货
SKU:
SK3-6364-213
WANT FREE SHIPPING? Click here to find out more!

Turnigy SK3电机电机质量和设计的又一次飞跃。我们指示工程师今日源提供给他们最好的品质磁铁,轴承和材料,并制定马达,它不仅对手,但超越了许多领先的汽车制造商的质量在市场上。

其结果是一个高效率,高素质的电机采用优质双屏蔽轴承,烧结钕磁铁和一个字符串绕定子确保准确和一致的线圈每一次。

该Turnigy SK3电机适合谁正在寻求毫不妥协质量无刷电机建模。

眼镜。
打开:16T
电压:10S Lipoly
RPM / V:213kv
内阻:0.023欧姆
最大负荷:65A
最大功率:2550W
轴直径:8.0毫米
螺栓孔:32毫米
螺栓螺纹:M4
重量:706克
电机插头:4mm子弹连接器

  • SKU SK3-6364-213
  • Brand SK3
  • 重量 1013.0000
  • 长度 177.00
  • Packaging Width 70.00
  • 高度 130.00
  • 千伏(转/ v)的 213.00
  • 最大电流( A) 65.00
  • 电阻( MH) 0.00
  • 最大电压(V) 37.00
  • 功率(W) 2550.00
  • 轴(MM) 8.00
  • 长度B (毫米) 72.00
  • 直径C(毫米) 59.00
  • 可以长深(mm ) 52.00
  • 总长度E(毫米) 103.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Well, everything mentionned is wrong.
My measures :

10S 4000 with a 20x10 = 100A and almost 4000W.
Motor works like a charm but might be better and its comfort zone with a 19x10 or so.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well, everything mentionned is wrong.
My measures :

10S 4000 with a 20x10 = 100A and almost 4000W.
Motor works like a charm but might be better and its comfort zone with a 19x10 or so.

this engine is a great value, great quality and works so wonderful. i am using it on my edge 540 2meters wingspan and around 9kg AUW, with a 19x10 wood prop, and 100a Yep esc, 10s lipo a lot of power

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

this engine is a great value, great quality and works so wonderful. i am using it on my edge 540 2meters wingspan and around 9kg AUW, with a 19x10 wood prop, and 100a Yep esc, 10s lipo a lot of power

Wahnsinns E-Motor, Leistung ohne Ende. Habe den Motor in einer 2 Meter Corsair mit ca. 7KG Geweicht verbaut. Angetrieben von 10S und an einer derzeitigen Testlatte 22x13.

Testdaten derzeit: 56 Ampere und 1900 Watt.

Luft absolut strungsfrei!!!

Um Das geld kann ich den Motor nur jedem nahe legen der einen Vernnftigen Antrieb fr ein Grossmodell sucht!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Wahnsinns E-Motor, Leistung ohne Ende. Habe den Motor in einer 2 Meter Corsair mit ca. 7KG Geweicht verbaut. Angetrieben von 10S und an einer derzeitigen Testlatte 22x13.

Testdaten derzeit: 56 Ampere und 1900 Watt.

Luft absolut strungsfrei!!!

Um Das geld kann ich den Motor nur jedem nahe legen der einen Vernnftigen Antrieb fr ein Grossmodell sucht!

I am using this motor in a Seagull Edge 540 180.

6.750 gr ready to fly.

10S 5000mah Turnigy Lipo.

TURNIGY K-Force 120A-HV.

Turnigy 19x10 Wood Propeller.

Very pleased with the power of this motor. Good Vertical with full throttle.

7 minutes flights and the motor is barely warm, and used a little less than 3000mah.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am using this motor in a Seagull Edge 540 180.

6.750 gr ready to fly.

10S 5000mah Turnigy Lipo.

TURNIGY K-Force 120A-HV.

Turnigy 19x10 Wood Propeller.

Very pleased with the power of this motor. Good Vertical with full throttle.

7 minutes flights and the motor is barely warm, and used a little less than 3000mah.

Installed this onto my Giant U-Can-Do 3D conversion. First flight was done without checking current flows as I couldn't get my wattmeter connected (wrong ends!)

Power system is a 12S 4000 40C pack, a 20x8 Xoar prop and a Sentilon 100 ESC. Checked it later - 85A, 3200W ! OMG.

Have dropped to a 20x6 Zinger prop - now drawing 62A and 2500W.

Next I'm going to try 10S and the original 20x8 prop, though I expect it to be in the same 65A / 2500W range...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Installed this onto my Giant U-Can-Do 3D conversion. First flight was done without checking current flows as I couldn't get my wattmeter connected (wrong ends!)

Power system is a 12S 4000 40C pack, a 20x8 Xoar prop and a Sentilon 100 ESC. Checked it later - 85A, 3200W ! OMG.

Have dropped to a 20x6 Zinger prop - now drawing 62A and 2500W.

Next I'm going to try 10S and the original 20x8 prop, though I expect it to be in the same 65A / 2500W range...

Great motor, very well built. Worth the price!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great motor, very well built. Worth the price!

Questo motore davvero quello che cercavo. Con 10S Lipo da 5000mah 30C tira una 20x8 a 65A e 2400W. Tiro statico la bellezza di 10kili. Ottima anche la confezione e l'imballaggio. A breve lo prover anche con la 20x10 ma sicuramente saremo intorno ad 80A di consumo.



This engine is really what I wanted. With 10S Lipo 5000mAh 30C pulls a 20x8 at 65A and 2400W. Static trust is 10kg. Excellent also the packaging. Next week I test it with 20x10 but surely it will be around 80A of consumption.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Questo motore davvero quello che cercavo. Con 10S Lipo da 5000mah 30C tira una 20x8 a 65A e 2400W. Tiro statico la bellezza di 10kili. Ottima anche la confezione e l'imballaggio. A breve lo prover anche con la 20x10 ma sicuramente saremo intorno ad 80A di consumo.



This engine is really what I wanted. With 10S Lipo 5000mAh 30C pulls a 20x8 at 65A and 2400W. Static trust is 10kg. Excellent also the packaging. Next week I test it with 20x10 but surely it will be around 80A of consumption.

Little more expensive than most of the others of this size, but beautifully made. Pleasantly surprised with the helicoil inserts on the mounting threads. Overall nice finish. One thing you still must do is glue the magnets, mine worked their way loose and started rubbing.
I recommend filling the gaps with Devcon Fasmetal 10 before using this motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Little more expensive than most of the others of this size, but beautifully made. Pleasantly surprised with the helicoil inserts on the mounting threads. Overall nice finish. One thing you still must do is glue the magnets, mine worked their way loose and started rubbing.
I recommend filling the gaps with Devcon Fasmetal 10 before using this motor.

Sehr hochwertig verarbeiteter Motor mit mchtig Power. Betreibe ihn an 10s und 20x10 Prop in einer Staufenbiel Yak 54 mit 1,95m Spannweite. Die Stromaufnahme bei Vollgas liegt bei ca. 85A. Ist evt. grenzwertig. Ich bin mit dem Kauf sehr zufrieden.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Sehr hochwertig verarbeiteter Motor mit mchtig Power. Betreibe ihn an 10s und 20x10 Prop in einer Staufenbiel Yak 54 mit 1,95m Spannweite. Die Stromaufnahme bei Vollgas liegt bei ca. 85A. Ist evt. grenzwertig. Ich bin mit dem Kauf sehr zufrieden.

SK3-6364(DT5035-14P) MOTOR (edited).pdf Download [122]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save

Radio Control Planes, Drones, Cars, FPV, Quadcopters and more - Hobbyking