注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册

TURNIGY AerodriveXp SK 3548-970 / 850W

TURNIGY AerodriveXp SK 3548-970 / 850W

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
215
SKU:
SK-3548-970

acc
产品介绍

TURNIGY AerodriveXp SK系列
AerodriveXP SK系列电机是专为那些谁想要的外转子技术最好的为他们的R / C飞机。通常约8-10%的效率提高,可以看到在类似的入级电机。

型号:SK-3548-970kv
打开:8
阻力位:0.024RM
空闲电流:1.78A
可以调整大小:35毫米
可以长:48.5毫米
重量:167克
:5毫米
最大安培:60A
最大功率:850W
螺栓孔:M3
螺栓间距:25毫米
轴承:NMB双特大型
细胞计数:3〜4细胞Lipoly
磁铁型:N45SH
建议道具:14x7
威力相当于:.25 0.46发光引擎

Product
Specifications

额外信息

  • 商品编号:
    SK-3548-970
  • Brand:
    N/A
  • 重量(g)
    215.00
  • 长度
    0.00
  • 宽:
    0.00
  • 高度:
    0.00
  • 千伏(转/ v)的
    970.00
  • 最大电流( A)
    60.00
  • 功率(W):
    850.00
  • 长度B (毫米):
    49.00
  • 可以长深(mm )
    36.00
  • 最大电压(V)
    15.00
  • 轴(MM):
    5.00
  • Unit Weight (g):
    167
  • 直径C(毫米)
    35.00
  • 总长度E(毫米)
    70.00
  • 电阻( MH):
    24.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
5 selle
provato il motore a banco con Lipo 4S 4500mA 30c;
con elica APCe 14/7 58 A assorbimento, 3,4 kg trazione
con elica APCe 13/6,5 50 A assorbimento, 3 kg trazione
Sono molto soddisfatto di questo motore risponde a quanto dichiarato.
Equipagger il mio bimotore C27J , 260 cm apertura alare, con due di questi motori.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This motor is awesome. I have used it to power a 72inch wingspan Falcon. It was to powerful for this model so I have now transferred it to power a Wot 4 using a 12x6 APC prop. on 4 cells performance is ballistic. On 3 cells the model flies aerobatically. This motor is very versatile and will handle a variety of props and models. I am very impressed!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Le moteur est arriv avec le bobinage brul et deux ferrites qui accrochaient (sans doute un test avant trop pouss expdition suivi d une chute) c'est le deuxime que j ai le premier est toujours impeccable.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I Just finished the plane and it has a 11" x 7 three blade prop , Master Aircrew.The motor run smooth and strong giving 88 watts . 50 A. enough to lift up my Pilatus Porter that I show you by clicking the tab FILES.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excellent little motor with real power.
Here's what I got with a watts-meter.
1) Turnigy battery 3000 mah , 4 cell , 20 C
12 x 6 prop , 900 watts , 62 Amp
11 x 7 prop , 890 watts , 54 amp.
These calculations are made for flying a VQ Pilatus Porter , arround 6 pound model . This means that the engine behaves like a size .46
I think the best option would have been flying it with a propeller 13 x 5 , three blade prop from Xoar, but no body has it in stock.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
14.03.2011

Bench Test with my Watts Up:

Nano-Tech 2200 3S 45C, 11x6 Chery Wood E, 460W, 42,5A

I think a 12 x 5 Propeller wil be good too.



Zippy 2800 4S, APC 14x7E, 948W, 71,2A,

Zippy 2800 4S, APC 13x6,5E, 970W, 70,7A

Zippy 2800 4S, APC 12x8E, 936,7W, 67,5A

Zippy 2800 4S, APC 11x6,5, 810W, 56,5A

for 4S lipos I recommend 12x5 propeller.

in this test with 4S lipos after 30 sec. the motortemp. was /- 50C





verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just received this engine and i was disappointing to find out that a magnet is probably loose and it touches the rotor at a certain point during the rotation. I will have to disassemble it and try to glue it with either CA or epoxy. Hope it works as advertised afterwards, for now I will give it only 2 points due to the low quality of assembly and need of finishing.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Il motore verr montato sul Mentor della Multiplex per fare aerotraino; appena fatti i test a banco lo monter e poster i risultati.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Habe diesen Motor in einen Sprinter ( Reichert Modell CZ) eingebaut Top Leistung und ein Super Preis
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Bought two of these, and installed one on a EFlite Ultimate running 4S and a 11X8.5 APC prop. Motor mount had to be modified to fit the plane, it appears to be non-standard versus other Turnigy 3548 motors. Plenty of power and torque. Runs pretty quiet, and the amp draw on this setup is 42A and about 650W. Overall a good motor, but plan on modifying the motor mount to adapt to firewall screw spacing. I only put about 5 flights on this setup so far, but I am satisfied with this product!
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

acc

产品标签

使用空格分隔标签。使用单引号(')标注词组。