注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册

Turnigy B36-40-09 2250kv内转

Turnigy B36-40-09 2250kv内转

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
199
SKU:
B36-40-09-2250
产品介绍

TURNIGY无刷内转

规格。
KV:2250rpm / V
功率:350W
打开:9
抗性:35
空闲电流:2.3
ESC:45
电池配置:3-4S
长度:42毫米
宽度:36毫米
轴:5毫米
重量:170g

Product
Specifications

额外信息

  • 商品编号:
    B36-40-09-2250
  • Brand:
    N/A
  • 重量(g)
    199.00
  • 长度
    0.00
  • 宽:
    0.00
  • 高度:
    0.00
  • 千伏(转/ v)的
    2250.00
  • 最大电流( A)
    0.00
  • 功率(W):
    350.00
  • 长度B (毫米):
    42.00
  • 可以长深(mm )
    40.00
  • 最大电压(V)
    15.00
  • 轴(MM):
    5.00
  • Unit Weight (g):
    170
  • 直径C(毫米)
    36.00
  • 总长度E(毫米)
    54.00
  • 电阻( MH):
    35.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Not such good luck with one. Smoked it in about 90 seconds in a UL1 Hydro, running 4s and a 40 by 52mm prop. Probably only good for 3s applications. Rokcster
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Genialer Innrunner. Perfekt fr Motorsegler. Ruhig und zuverlssig.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Motor looks ok. There was a small staple inside of mine. I heard it rubbing and fished it out with a small piece of wire. 3 stars just because of the staple. Other than that its not a bad looking motor for the price. The wires are very stiff though. Softer wires and no staple and it would have been 5 stars all the way. CAREFUL!!! Check the motor for staples!!!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These 36mm turnigy inrunners have great apllications for 90mm edf use , this one is good for 4s use on a 90mm edf
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Using this motor on a G.W. Kwik-E. With a 9x5 folding prop it pulls 52amps 530watts on 11v. On a fresh pack it pulls a little more. The Kwik-E has large cooling holes in the design so heat isn't really a problem. You do have to make a new firewall though. The bolt pattern is different.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great Motors - I use 2 of them in an Agitator Raceboat Catamaran (90cm hull). 100km/h + no problem with the right propellers for these motors.

But you have to give them a fan and a good water cooling !!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I tested the motor using a 3 cell LiPo with 4300mAh from X-Cell.

With a 7x7 APC Sport propeller it is at 50A @ 11V, so about 550W input power. Motor is up at about 15,000-16,000 RPM and is getting quite warm without airflow.

I'm aiming at using a 7x10 APC Sport propeller fr high-speed flights.

Current flow should drop during flight, because the motor will spin faster (approx. 20,000 RPM).

4 Stars only, because there are no mounting parts, etc. included and there is no manual or detailed informations about max. current or best efficiency.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
More tests with a 3s lipoly 3700mah.

Graupner Watts Amps

5.5*5.5 360 32

6.5*6.5 480 43

7*4 475 45

M/airscrew Watts Amps

6*4 280 25

7*3 360 32

Close too the watts range advertised
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。