注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global
  • USA

Turnigy CA80 160KV无刷外转子(50〜80CC式)

Turnigy CA80 160KV无刷外转子(50〜80CC式)

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 202.10
Rating:
Stock:
重量:
1920
SKU:
8080-10-160

Price War

产品介绍

设计为50〜80CC汽油发动机更换,这是电机在17〜30磅运动,缩放和3D飞机直接螺栓。
一个完美的大小电机3D飞行多达20磅。
电机是很好具有较强的坐骑,端罩和一个同心双轴承建在后方支持大型螺旋桨和旋转就可以了,尤其是在硬3D飞行。

该电机是很好的设计和最优质的。
工厂只能产生每月这些马达的数量有限,由于在平衡和加工这样一个大的对象的时间增加。


规格。
型号:80-80-10
阻力位:0.011ohm
ESC要求:200A
输入电压:30〜50V
KV:160转/ V
重量:1545克
:8毫米
非负载电流:6.0A 20V时
外形尺寸:152x133x81mm(包括安装)
相当于:50-80cc燃气发动机

Product
Specifications

额外信息

  • 商品编号:
    8080-10-160
  • Brand:
  • 重量(g)
    1920.00
  • 长度
    170.00
  • 宽:
    120.00
  • 高度:
    125.00
  • 千伏(转/ v)的
    160.00
  • 最大电流( A)
    0.00
  • 功率(W):
    0.00
  • 长度B (毫米):
    133.00
  • 可以长深(mm )
    70.00
  • 最大电压(V)
    50.00
  • 轴(MM):
    8.00
  • Unit Weight (g):
    1545
  • 直径C(毫米)
    81.00
  • 总长度E(毫米)
    152.00
  • 电阻( MH):
    11.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
This motor is well made,I have tested the motor without load and it seems to be well balanced and very reasonable for the price. However, the base plate for the motor got bent during transportation! I was able to repair it but, it would be better if the motor box had black foam like the other MultiStar motors. Also it would be a good idea if the leads were a bit longer!
I will do more testing and add numbers hopefully soon.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
great motor ...flying a 35pcnt 104 aj slick hard core 3d flight my esc is 160amp castle prop is falcon 26x12 its the best prop for this motor esc and motor never get warmer then 110 degrees
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Der Motor ist gut verarbeitet und hat mchtig power. Ich betreibe ihn in einer SU 31 von Graupner mit 10 s und bin sehr zufrieden. ber Langzeiterfahrung kann ich noch nichts berichten.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have 20 flights on this motor with no problems. I fly for 3 min on 2 6s 5000mAh Skylipos in 12 s config. I am using a 120 hv eRC esc from hobby lobby. With a zinger 24x10 prop. Be sure to use lock tite on the mounting plate screws that hold the plate to the motor or they will come loose and sound like a bad bearings. Big motor with big power! Check out video http://www.youtube.com/watch?v=3Dl6f47n1k0sk=20
Cheers!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
First test of the motor:



12S Zippy 40C 5000mAh:



25x10 Xoar - 125A - 6200rpm



Motor is installed in a Sebart 2.2m, going to give me very good performance in this plane which is recommended for 50-60cc engines!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
LOVE THIS MOTOR! I HAVE IT INSTALLED IN A GIANT RC GUYS CHEROKEE 140 100 INCH PLANE, USING TWO 6S 5800 MAH ZIPPYS IN SERIES FOR 12S AND A 20X14 PITCH PROP,AND IT FLYS GREAT! I CAN GET 10 MINUTE FLIGHT TIMES EASILY, AND IT FLYS THE PLANE AT HALF THROTTLE. THINKING ABOUT REPLACING THE RIMFIRE 65CC MOTOR IN MY GIANT TOP FLITE CORSAIR WITH THIS MOTOR. THANKS HK FOR ANOTHER GREAT PRODUCT. I HIGHLY RECOMMEND THIS MOTOR !!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hello,



I would like to know the length/distance from the rearend of the motor (I mean, where motor is mounted) to where the spinner plate sits.

And I need to know the radius (or diameter) of the mounting hole circle.

Its for a scratch built LTR-14 Laird Turner, have a look at ***.glattcad.de



Thanks a lot in advance!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I HAVE THIS INSTALLED IN AN RC GUYS 100 INCH GIANT SCALE CHEROKEE 140 WITH TWO 5800 6S, 30C IN SERIES FOR 12S. I USUALLY FLY FOR 5-6 MINUTES WITH ENOUGH RESERVE FOR ANOTHER 5-6 MINUTES! DUE TO GROUND CLEARANCE, I HAVE TO USE A 20-14 PITCH PROP, BUT IT WORKS JUST FINE. THIS MOTOR AND LARGE PLANE REALLY IMPRESSES EVERYONE AT THE FIELD. I NOW FLY ALL ELECTRIC, THANKS TO HOBBY KING. I EVEN HAVE AN ELECTRIC, 87 INCH GIANT SCALE T/F CORSAIR!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have installed this motor in the RC guys 100 inch Cherokee 140, and it works great! I am using two Zippy 5800 mah 30C batteries and the Turnigy 160 amp esc, and I fly about 6 minutes, with at least 3 more minutes in reserve. It flies on half throttle, and performs better than I ever imagined it would. No one that sees it believes it is an electric plane, being so big. I am using a 20x14 APC prop, as that is all the ground clearance I have room for. I have over ten flights so far, and I strongly recommend this motor.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
super Motor, wirklich das beste was ich an Motoren bereits bekommen habe. Habe zwei Stck davon, einer in der Rascal mit 2.79 Meter Spannweite, 9.5 Kg Abflugewicht und einer im Porter mit 3.2 Meter Spannweite und 17 Kg Abfluggewicht. In der Rascal mit 12S1P und im Porter 12S2P Turnigy 5000 der Lipos Zellen. Der Mejzlik Carbone 27x12 Propeller bringt dabei bis 19 Kg Schub bei 150 Ampere. Selbst bei der Rascal nach 1000 Schlepps noch keinen Verschleiss bemerkbar.... Hammermotor....
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。