New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

Turnigy眼镜蛇玻璃纤维V型船体385毫米(赫尔只)

Turnigy眼镜蛇玻璃纤维V型船体385毫米(赫尔只)

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
SKU:
Cobra385
WANT FREE SHIPPING? Click here to find out more!
TURNIGY玻璃钢船的新系列的一部分。新的眼镜蛇V型船体成型准确地在玻璃纤维和准备的硬件。

规格。
长度:385毫米
宽度:110毫米
高度为60mm
重量:149克
硬件很快到达。
*所有的可笑便宜的价格。例如,CNC铝合金舵系仅售$ 4.00!
  • SKU Cobra385
  • Brand Turnigy
  • 容量(mAh) -
  • 重量 305.0000
  • 长度 0.00
  • Packaging Width 0.00
  • 高度 0.00

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

O casco bem feito, porem a HK no tem as peas dedicadas para o casco, ou seja, para montar so 100pcnt de adaptaes! Mas no final o resultado compensou... Mas por experiencia pessoal, coloquem um motor com menos de 3000 KW.. o motor de 3700 que eu coloquei faz ela capotar no eixo j na arrancada! Caso voc resolva montar uma tambm, boa sorte e boa diverso!
(Keep Cross Hobby)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

O casco bem feito, porem a HK no tem as peas dedicadas para o casco, ou seja, para montar so 100pcnt de adaptaes! Mas no final o resultado compensou... Mas por experiencia pessoal, coloquem um motor com menos de 3000 KW.. o motor de 3700 que eu coloquei faz ela capotar no eixo j na arrancada! Caso voc resolva montar uma tambm, boa sorte e boa diverso!
(Keep Cross Hobby)

Will use twin horn rudder (18 USD) on the TAIPAN which is somewhat bigger as the COBRA:

Motor: 43gr watercooled 3000kv motor, 300W. 195mm rigid shaft, 30mm 3-fluke prop, 54gr W/C 30amp ECS and 1500mh 3S battery. Turnfins came off NTN 600 as scratch.

My Cobra will be a light SeaWater Version. No cooling, 7 amp micro outrunner 2100kv, 8 amp Birdie ECS, shaft same, prop 2-fluke 27 mm, fins and rudder from Warrior, battery between 1300-1800 2S.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Will use twin horn rudder (18 USD) on the TAIPAN which is somewhat bigger as the COBRA:

Motor: 43gr watercooled 3000kv motor, 300W. 195mm rigid shaft, 30mm 3-fluke prop, 54gr W/C 30amp ECS and 1500mh 3S battery. Turnfins came off NTN 600 as scratch.

My Cobra will be a light SeaWater Version. No cooling, 7 amp micro outrunner 2100kv, 8 amp Birdie ECS, shaft same, prop 2-fluke 27 mm, fins and rudder from Warrior, battery between 1300-1800 2S.

beautiful, nice finish. BUT... Like the others customers, the last 50 millimeter of the hull are distorted. It's not a problem for an average speed configuration. But for an high speed configuration... the boat jumps on water anytime... solution: mastic

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

beautiful, nice finish. BUT... Like the others customers, the last 50 millimeter of the hull are distorted. It's not a problem for an average speed configuration. But for an high speed configuration... the boat jumps on water anytime... solution: mastic

Nicely made little fiberglass hull, unbelievable price. The hatch could have been designed a little better to channel water splashes over the back, without a good seal it will capture water into the hull. It is a perfect replacement for my damaged Mini-V hull, just swap over the running gear, you can even carefully remove the Mini-V radio/motor/servo mounting tray from the old hull and glue it into this one. It is worth noting that this hull will require some modelling skills to utilise.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nicely made little fiberglass hull, unbelievable price. The hatch could have been designed a little better to channel water splashes over the back, without a good seal it will capture water into the hull. It is a perfect replacement for my damaged Mini-V hull, just swap over the running gear, you can even carefully remove the Mini-V radio/motor/servo mounting tray from the old hull and glue it into this one. It is worth noting that this hull will require some modelling skills to utilise.

Belle coque, sympa ,solide mais le point noir elle n'est pas stable a est allure un peu soutenue elle sautille sans cesse...le bateau est incontrlable est rebondit tous le temps sur l'eau mme avec des flaps. Coque sympa si l'on ne veux pas faire de vitesse pour ma pars ma config : Moteur 4500Kv/Vario 30A en 2S (brider car trop puissant...).aprs on peux toujours modifier la coque pour ajout de redans mais pas grand intrt pour ce prix.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Belle coque, sympa ,solide mais le point noir elle n'est pas stable a est allure un peu soutenue elle sautille sans cesse...le bateau est incontrlable est rebondit tous le temps sur l'eau mme avec des flaps. Coque sympa si l'on ne veux pas faire de vitesse pour ma pars ma config : Moteur 4500Kv/Vario 30A en 2S (brider car trop puissant...).aprs on peux toujours modifier la coque pour ajout de redans mais pas grand intrt pour ce prix.

O casco muito frgil para fazer a furao para o veio!!! a furao que deveria vir feita de fabrica, muito estreito e muito baixo, no d para colocar a electrnica de mesma maneira que o Joysway

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

O casco muito frgil para fazer a furao para o veio!!! a furao que deveria vir feita de fabrica, muito estreito e muito baixo, no d para colocar a electrnica de mesma maneira que o Joysway

very good and strong hull

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

very good and strong hull

Watch my turnigy cobra mini deep v!

15 inches fiberglass hull

1/8 flex drive, brushless 300 outrunner, 1500mah 3s lipo. 35amp turnigy marine esc, turnfin, trimtabs and cnc rudder.

http://www.youtube.com/watch?v=AZrvSy6f8

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Watch my turnigy cobra mini deep v!

15 inches fiberglass hull

1/8 flex drive, brushless 300 outrunner, 1500mah 3s lipo. 35amp turnigy marine esc, turnfin, trimtabs and cnc rudder.

http://www.youtube.com/watch?v=AZrvSy6f8

I love this little guy. Decent construction, they are a 2 piece design and the crack in the middle where the hulls are joined is a little ruff but a small stripe fixes this. This boat will problably be tricky to keep from hoping right out of the water. I am installing a 2040 size brushless motor and 30amp ESC. I am going to run it at 7.4 volts and use 3700 kv motor. If you want to run this at 11.1volts I would use approx. 2500kv motor.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I love this little guy. Decent construction, they are a 2 piece design and the crack in the middle where the hulls are joined is a little ruff but a small stripe fixes this. This boat will problably be tricky to keep from hoping right out of the water. I am installing a 2040 size brushless motor and 30amp ESC. I am going to run it at 7.4 volts and use 3700 kv motor. If you want to run this at 11.1volts I would use approx. 2500kv motor.

nice hull. A bit small but doable. Hops in the water alot due to hull design. trim tabs are a must. Boat still ends up costing you a bit because HK doesnt sell products to out fit it. My HK modified reef racer cost less and is more fun.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

nice hull. A bit small but doable. Hops in the water alot due to hull design. trim tabs are a must. Boat still ends up costing you a bit because HK doesnt sell products to out fit it. My HK modified reef racer cost less and is more fun.

  1. 1
  2. 2
side view Download [2736]
motor mount Download [2775]
bow photo Download [2677]
transom with hard ware Download [2472]
transom with hard ware Download [2472]
internal fit out Download [2802]
hard ware fit up Download [2513]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!