注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册

Turnigy dlux 160A HV无刷调速器(OPTO)

Turnigy dlux 160A HV无刷调速器(OPTO)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
212
SKU:
TGY_DEL160HV
产品介绍

Turnigy®dlux胚胎干细胞已设置在质量和性能的新凳子标志。每个ESC采用双PCB设计分离电机电源和MCU。这种设计允许每个PCB上的最佳组件布局,并提供了散热和热效率的理想配置。两者的PCB封装在了全铝合金散热外壳,以确保最大的散热。所有Turnigy dlux胚胎干细胞可以通过编程卡或发射器进行编程。清晰和易于理解的指令都包括在内。

规格。
最大续电流:160A
最大瞬时电流:180A
BEC:N / A
锂电:6〜12S
镍氢电池:16〜36cells
重量:157克
最大RPM(2极):200,000rpm
尺寸:83点¯x33×23毫米
电机插头: 女4毫米子弹连接器
电池插头:
产品特点: 火花消除铅采用2mm插头

特征。
极低内阻
极低的工作温度
过温保护
APEC的MOSFET(台湾小学)

编程选项。
电池类型:6S〜12S
前进/后退
软启动
LV切断类型(忽略,降低功耗,停止电机)
LV切断设置(2.5〜3.5V以0.1V为单位)
时序(自动,非常低,低,中,高,非常HGH)
切换(8,16kHz)
恢复出厂设置
主动RPM控制:开/关(州长模式)

默认出厂设置。
制动:
电池: 锂聚合物自动检测
低电压:3.2V(断电电机)
时间: 自动
频率:8KHz的

注:编程盒可现在,请查看下相关的项目。

Product
Specifications

额外信息

  • 商品编号:
    TGY_DEL160HV
  • Brand:
  • 重量(g)
    212.00
  • 长度
    145.00
  • 宽:
    27.00
  • 高度:
    100.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Bought to power a big boat on 10S.

Before puting a custom watercooling on it, runned it on 10S out of the water (no load).

Burnt almost instantly, do not understand the issue, but seems of not very good quality.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I ordered one of these to replace a 35ccNGH motor I had bought from Hobbyking that arrived damaged and was warrantied but still absolutely refuses to run inverted so I decided to go electric instead. Ironically, the ESC arrived, looked great,looked well built but would not power up ? I kind of had to chuckle having spent this money to replace another high buck product from here and now I have the same plane with two power systems that still has not flown LOL ! I found a Youtube video with this ESC that had the same problem for that guy. But know, I am happy with Hobbyking, they're doing a great job and they're stuff is reasonably priced. I just happened to get two lemons for the same plane 6 months apart.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Muy facil de programar,asta ahora bien,lo tengo instalado en una turbina de 90 electrica a 12s
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Used this three times drawing 101 amps on 10S. On the third flight it went off with a bang, melting itself and dropping molten solder onto the bottom of the cowl (spun aluminium luckily). Luckily it was not mounted in the fuselage or my 1/3 scale WW1 Moraine may have been shot down in flames.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Too late for me to realize that there were actually so many bad reviews on this dLux esc. I just couldn't agree more with those negative comments and reviews. Here's the video proof. https://youtu.be/Ej0BkiQWESI

Don't bother the 4 star ratings, without it, my review will simply disappear in the thin air! I gave it 0 star!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Too late for me to realize that there were actually so many bad reviews on this dLux esc. I couldn't agree more with those negative comments. Here's the video proof. https://youtu.be/Ej0BkiQWESI
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
facilmente programmabile e di grande affidamento....davvero un ottimo regolatore
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Compared with its big brother on steroids - the Turnigy Dlux HV 250V, (that I bought shortly before this one), this high power, HV ESC is significantly more compact & only about a third of the weight, but still feels very solid & has good heat-sinking. Not the same overkill with the leads & connectors of its big brother either. All power-carrying leads are 10AWG, with the motor tails pre-terminated in gold 4mm females, while the power connections are tinned bare ends. Theres also, a thin anti-spark pre-connection lead on the positive side of the supply. ....... This HV ESC programs fine with the Turnigy Dlux programmer BUT - there are absolutely no relevant instructions supplied with the ESC or the Dlux programmer regarding connection to or how to use the programmer so you have to discover for yourself that this ESC (unlike many other BEC-less ESCs, including Turnigy K force series etc.) has to be connected to HV motor power (6s LiPo min) AS WELL as being supplied with 5v/6v on its "servo" lead (as per normal with non-BEC ESCs) before the programmer will talk to it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great ESC, great price too... I have this wired up to the HK rotomax 50cc motor and seems to handle everything okay. The anti spark feature that comes with this ESC I haven't used, I just covered the bullet with heat shrink and shrunk it onto the red main wire lead. I have made a separate anti spark connector. I like it HK! Thanks a lot!!! :)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Received, but have not had a chance to use yet. Arrived greatly packed and looks great.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • Turnigy DLux 6s-12s ESC

Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。