注册

Product Finder

设置

Useful links

Live Chat
 
[["US","AU","GB","DE"]]
注册

Turnigy dlux 80A HV无刷调速器(OPTO)

Turnigy dlux 80A HV无刷调速器(OPTO)

Discontinued Product

Please continue searching for a similar product.
Rating:
Stock:
OUT OF STOCK
重量:
153
SKU:
TGY_DEL80HV
产品介绍

Turnigy®dlux胚胎干细胞已设置在质量和性能的新凳子标志。每个ESC采用双PCB设计分离电机电源和MCU。这种设计允许每个PCB上的最佳组件布局,并提供了散热和热效率的理想配置。两者的PCB封装在了全铝合金散热外壳,以确保最大的散热。所有Turnigy dlux胚胎干细胞可以通过编程卡或发射器进行编程。清晰和易于理解的指令都包括在内。

规格。
最大续电流:80A
最大瞬时电流:95A
BEC:N / A
锂电:6〜12S
镍氢电池:16〜36cells
重量:112克
最大RPM(2极):200,000rpm
尺寸:1.52×33×23毫米
电机插头: 女4毫米子弹连接器
电池插头:
产品特点: 火花消除铅采用2mm插头

特征。
极低内阻
极低的工作温度
过温保护
APEC的MOSFET(台湾小学)

编程选项。
电池类型:6S〜12S
前进/后退
软启动
LV切断类型(忽略,降低功耗,停止电机)
LV切断设置(2.5〜3.5V以0.1V为单位)
时序(自动,非常低,低,中,高,非常HGH)
切换(8,16kHz)
恢复出厂设置
主动RPM控制:开/关(州长模式)

默认出厂设置。
制动:关
电池:锂聚合物自动检测
低电压:3.2V(断电电机)
时间:自动
频率:8KHz的

注:编程盒可现在,请查看下相关的项目。

Product
Specifications

额外信息

  • 商品编号:
    TGY_DEL80HV
  • Brand:
  • 重量(g)
    153.00
  • 长度
    140.00
  • 宽:
    27.00
  • 高度:
    100.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
I purchased this speed controller after the one I wanted was out of stock. I am running 12s on a large turnigy aerodrive motor on a Sig Rascal 110 inch. I have not been able to get it to function with 12s. First I thought it was my solder connections, but I redid them all and they are good. I discovered it runs perfectly on one 6s battery. I am programming with the transmitter. Also, some of the description on this page is incorrect. It does not autosense cells and the timing only does automatic, medium and high. I am waiting on the programming box to get here. Maybe I will have better luck with that. If it ends up working on 12s I will amend my review. Right now I cannot use it.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
as i have got the 55 low vloltage, i needed

a HV esc so i gave it a go.

Well All i can say it IS as good as a Castle

very smooth ran 8 cell on a AXI 4130/16

was over 2000watts very easy no drama, just got on with it

yes i would get another one
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Used the programming box to set-up, running 12s @ 60A full load current, can't fault it prefer it to my Hobbywing 100A HV ESC. Very good value.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Horrible. Lit on fire while on a SK3 6374. Burned my model down.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Running an APC 16x12 on 8 cells works perfectly. Have had not one issue with this esc for over 2 years now. Would buy again.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Eigentlich wrde ich dem Teil keinen eintzigen Stern verleihen. Nur nach zwei Rundflge ist das Teil abgeraucht. Schwach.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Does what it is made for. Runs on 10S and motor is smooth, regulation is linear and it seems to reach its specs. So as of now, good product.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Works as it should. No issues so far. recomended product.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Der Regler arbeitet mit einem SK 6354/245 und 10S perfekt. Gutes Leerlaufverhalten.
Preis/Leistung passt. Wrde ich wieder kaufen
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I am using this for my mountainboard. Don't buy those for your project if you don't have V-brakes. Braking with this esc will block your wheel. Overall good preformance on 10S with 2.7kW 6364 SK3. Smooth throttle response. I have aprox. 50km on my board and everything seems fine.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。