New Items 论坛
注册

Total Price

AU$ 0.00

购物车 0 购物车 0 Loading...

Turnigy Fabrikator 3D打印机(欧盟插头)

Turnigy Fabrikator 3D打印机(欧盟插头)

Discontinued Product

Please continue searching for a similar product.
SKU:
9171000549-1
WANT FREE SHIPPING? Click here to find out more!

Turnigy Fabrikator,我们最糟糕的保密是在这里;我们没有泄漏出来的是它有多好。这是目前市场上的钱打印机用的功能和打印机的质量价格三倍最佳值。

不再是3D打印技术的硬核技术爱好者和工业设计师的专属领域,现在用一台电脑,并把扁平封装在一起家具的能力,任何人都可以访问。无论你是到飞机,多旋翼飞行器,汽车,游艇,直升机,机器人,火车甚至动漫俑Fabrikator将很快成为您最灵活的工具。找不到罕见一部分旧型号或者你只是想修改现有的作品呢?现在,你可以打印你想要什么,当你想要它。

Turnigy Fabrikator是能够使用ABS和PLA长丝已经可以从就近的HobbyKing仓库,并可以打印高质量的完成在150毫米/秒实现的。已经一去不复返了,你睡觉前设置打印机,希望当你起床作业完成的日子。 3D打印机使用的是只是预产车型和概念设计的证据,但现在你可以设计,印刷和在各种应用程序中使用的部分。

这令人难以置信的精心设计的打印机配备了坚如磐石的框架,超稳定四路轨支持的打印板,高品质的NEMA等级电机,可移动的玻璃印刷平台和双带Y轴驱动器意味着你可以再次打印高精度片一次,没有需要恒定的机械调整。

这不仅是一个伟大的机器,我们采取这一步,并创造了一系列将引导你一步一步建立视频和独特的生活动态和可更新的故障排除指南设置打印机沿下面是文件标签下,但由于Fabrikator是如此简单易用,你会不会需要太大的帮助。

为了使Fabrikator负担得起尽可能为您,我们设计了它作为一个简单的放在一起扁平封装套件,其中如果按照说明书优秀与视频系列联合你将它建在几个小时。就是这么简单,我们得到我们最没有技术人员来放一一起,他有它不超过六小时去。

特征:
•球轴承衬棒
•轧制丝杆与消隙传动
•酚醛热稳定床W /可拆卸的玻璃打印区域
•加热的打印床
•NEMA 23和17电机
高速打印•4杆支持的打印板
•6双面高准确性承担全部打印机支持
•SD卡的无线缆连接打印|
•解放军和ABS丝兼容
•顶部进料反绑定阀芯饲料
•双打印散热风扇
•2A与主动散热散热器步进驱动器
•220〜110V的A / C兼容
•归位和限位开关
•全LCD图形用户界面与在飞行中调整
•大型150x150x100mm打印区域
•双轴承支持双带Y轴驱动器
•重型12Volt 29Amp电源
•开源控制架构和支持
•全面的设备支持以及未来可扩展平台

眼镜:
外形尺寸:360x400x600mm
打印尺寸:150x150x100mm
喷嘴口径:0.4毫米
单丝直径:1.75毫米
打印速度: 最高可达300毫米/秒
打印平台: 酚醛树脂的热稳定床可移动的玻璃印刷平台
灯丝类型:ABS和PLA

需要:
您所选择的灯丝

***链接到手动***

  • SKU 9171000549-1
  • Brand -
  • 容量(mAh) -
  • 重量 19200.0000
  • 长度 676.00
  • Packaging Width 505.00
  • 高度 545.00
  • Turnigy Fabrikator 3D Printer

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Well, things went seriously south with this one.

I purchased mine in September, and as it happens, one of the gantry bearings was binding out of the box, so I had to stop the build and contact support for a replacement bearing.

It is now 8 December, and I am still waiting for the replacement bearing. The printer has been sitting there on the table, half-built, for over two months now. A big multi-hunderd-dollar paperweight in its current state.

I made a youtube video demonstrating the problem: https://youtu.be/e_-KtD3_bys

Support, I am still waiting. The RMA number is 185719.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Well, things went seriously south with this one.

I purchased mine in September, and as it happens, one of the gantry bearings was binding out of the box, so I had to stop the build and contact support for a replacement bearing.

It is now 8 December, and I am still waiting for the replacement bearing. The printer has been sitting there on the table, half-built, for over two months now. A big multi-hunderd-dollar paperweight in its current state.

I made a youtube video demonstrating the problem: https://youtu.be/e_-KtD3_bys

Support, I am still waiting. The RMA number is 185719.

Que vous dire , pour ou commncer. J'ai acheter cette imprimante il y a un peut plus de 4 mois et cela fait maintenant 4 mois quel ne fonctionne pas. L'imprimante a fonctionner 3 jours puis la carte arduino et la ramps4 a cramer. J'ai contacter directement le sav qui ma dit qu'ils allaient faire le n*cessaire pour m'envoyer les cartes. Aujourd*hui 4 mois plus tard Rien toujours rien malgr* de nombreuse relance. Je trouve cela pitoyable sachant que j'ai d*penser *norm*ment d'argent ici , on ne ma m*me pas proposer un *change alors que l'imprimante avait 3jours. Maintenant question qualit* d*impression passer votre tour j'ai fabriquer la mienne pour bien moin ch*re et largement plus pr*cis de la qualit*

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Que vous dire , pour ou commncer. J'ai acheter cette imprimante il y a un peut plus de 4 mois et cela fait maintenant 4 mois quel ne fonctionne pas. L'imprimante a fonctionner 3 jours puis la carte arduino et la ramps4 a cramer. J'ai contacter directement le sav qui ma dit qu'ils allaient faire le n*cessaire pour m'envoyer les cartes. Aujourd*hui 4 mois plus tard Rien toujours rien malgr* de nombreuse relance. Je trouve cela pitoyable sachant que j'ai d*penser *norm*ment d'argent ici , on ne ma m*me pas proposer un *change alors que l'imprimante avait 3jours. Maintenant question qualit* d*impression passer votre tour j'ai fabriquer la mienne pour bien moin ch*re et largement plus pr*cis de la qualit*

This printer is really great, although it needs some tweaks:

1.) The lower Z-Axis Endpoint is not working -> put it up a little or the printer may crash!!

2.) When assembling the Z-Axis screw, put the brass nut in a LOWER position or the z-axis will have too much friction!

3.) Replace the original A4988 drivers with DRV8825 (flip Pot to the other side)

4.) Double up the Steps per mm in the configuration file of the Firmware, as you have doubled up the precision now (XY 160 Z 3200 E 168)

5.) Tune the potentiometers on the DRV8825 drivers to match the motors, take your time, you need the best amps for max power but not burning the motors. I have set it to 0.44V

6.) Use the foam of the packaging for isulation while printing ABS!

7.) Use lithium grease for z and sewing machine oil for x and y

8.) Take about 2 hours to fine tune the table-extruder height or you will have snowplowing or bad adhesion problems in the end

9.) Don't exceed around 80mm/s when printing, as long as you don't have a bowden extruder

With these tweaks you will get a printing quality close to the ultimaker !!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This printer is really great, although it needs some tweaks:

1.) The lower Z-Axis Endpoint is not working -> put it up a little or the printer may crash!!

2.) When assembling the Z-Axis screw, put the brass nut in a LOWER position or the z-axis will have too much friction!

3.) Replace the original A4988 drivers with DRV8825 (flip Pot to the other side)

4.) Double up the Steps per mm in the configuration file of the Firmware, as you have doubled up the precision now (XY 160 Z 3200 E 168)

5.) Tune the potentiometers on the DRV8825 drivers to match the motors, take your time, you need the best amps for max power but not burning the motors. I have set it to 0.44V

6.) Use the foam of the packaging for isulation while printing ABS!

7.) Use lithium grease for z and sewing machine oil for x and y

8.) Take about 2 hours to fine tune the table-extruder height or you will have snowplowing or bad adhesion problems in the end

9.) Don't exceed around 80mm/s when printing, as long as you don't have a bowden extruder

With these tweaks you will get a printing quality close to the ultimaker !!!

For this price you get no better Printer.
After a little adjustment you get a reely good Printer for this Price.
Please take no Hairspray to fix your PLA or ABS on Heatbed.
It is not good for the Printer and looks terrible on the Acryl Glass.
Better you take Masking tape (I dont no the exactly name for this special tape, in German its Malerkreppband) It works better than Hairspray an you have a Clean Printer.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

For this price you get no better Printer.
After a little adjustment you get a reely good Printer for this Price.
Please take no Hairspray to fix your PLA or ABS on Heatbed.
It is not good for the Printer and looks terrible on the Acryl Glass.
Better you take Masking tape (I dont no the exactly name for this special tape, in German its Malerkreppband) It works better than Hairspray an you have a Clean Printer.

This is a great printer. Assembly with the aid of the videos was a piece of cake and had fun building it. Works really well & produced already some custom parts for the hobby. If the printsize is smaller... being more creative helps. :)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is a great printer. Assembly with the aid of the videos was a piece of cake and had fun building it. Works really well & produced already some custom parts for the hobby. If the printsize is smaller... being more creative helps. :)

Great product, arrives in 2 days from Holland. With the Manual and the really great Videos the Assembling was very easy. The qualyty of the parts are very good and they are all matched together. The Tools that can sold seperatly are not 30 Euro worth, poor qualitiy, the hex wrenches are loos. All in all a great deal with that Thing..

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great product, arrives in 2 days from Holland. With the Manual and the really great Videos the Assembling was very easy. The qualyty of the parts are very good and they are all matched together. The Tools that can sold seperatly are not 30 Euro worth, poor qualitiy, the hex wrenches are loos. All in all a great deal with that Thing..

I have one, and I'm very please with the quality of this printer, I have taken my time to assemble, and follow strictly the assembly vids on youtube, no problems here at all.
Did not do the FW update, and dont use the Usb and powercord at the same time.
Reading the forums helps to keep you out of troubles like not use the two power source at the same time, so do read them as much as you can
All works well so far, and if something works good, don't mess with it ! !
Cheers.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have one, and I'm very please with the quality of this printer, I have taken my time to assemble, and follow strictly the assembly vids on youtube, no problems here at all.
Did not do the FW update, and dont use the Usb and powercord at the same time.
Reading the forums helps to keep you out of troubles like not use the two power source at the same time, so do read them as much as you can
All works well so far, and if something works good, don't mess with it ! !
Cheers.

I was a little sceptiv before I bought it and the first few prints. Always watched all of the parts closely during the print, in case any problems occur that need a emergency stop. :P

Ive printed some smaller detailed and bigger objects since then and Im quiete impressed. Yes, I had the Z axis problem but it never occured during printing and I get pretty fine results despite the heavy print head. My other printer is a german reprap neo witch seems to be a little more precise on X and Y but all in all this printer is an enjoyment to build and prints very effective. Even the hardest overhangs with PLA on the heated glass bed are working out well.

Pay attention during the build and take your time.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I was a little sceptiv before I bought it and the first few prints. Always watched all of the parts closely during the print, in case any problems occur that need a emergency stop. :P

Ive printed some smaller detailed and bigger objects since then and Im quiete impressed. Yes, I had the Z axis problem but it never occured during printing and I get pretty fine results despite the heavy print head. My other printer is a german reprap neo witch seems to be a little more precise on X and Y but all in all this printer is an enjoyment to build and prints very effective. Even the hardest overhangs with PLA on the heated glass bed are working out well.

Pay attention during the build and take your time.

First 3d printer. Saw the videos and used the manual for assembly. Take time to unscrew/ screw again some bolts to align all as stated. Grease the rods. And all will be fine.
PLA is easy to print. ABS failed with Esun and great with another manufacturer (less brittle). 180/60 for PLA, 230/110 for ABS and Hairspray ! Not so noisy. Cura 14 is great. Sketchup do the job as i'm a beginner. Very good finish of the printed objects. Very happy. Thanks

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

First 3d printer. Saw the videos and used the manual for assembly. Take time to unscrew/ screw again some bolts to align all as stated. Grease the rods. And all will be fine.
PLA is easy to print. ABS failed with Esun and great with another manufacturer (less brittle). 180/60 for PLA, 230/110 for ABS and Hairspray ! Not so noisy. Cura 14 is great. Sketchup do the job as i'm a beginner. Very good finish of the printed objects. Very happy. Thanks

Works great, adjustement of printing bed is essential. If you dont have a gauge, try a folded 80g sheet of printer paper. I am waiting for an upgrade for getting a larger printing area.200x200x150 would be wonderful, i didnt think so many parts would be larger than 150mm.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works great, adjustement of printing bed is essential. If you dont have a gauge, try a folded 80g sheet of printer paper. I am waiting for an upgrade for getting a larger printing area.200x200x150 would be wonderful, i didnt think so many parts would be larger than 150mm.

  1. 1
  2. 2
Fabrikator Q&A Download [228]

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!