注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global

Turnigy全金属Servoless 100度扭转ñ转到为88mm奥莱奥腿(2个)退刀

Turnigy全金属Servoless 100度扭转ñ转到为88mm奥莱奥腿(2个)退刀

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 51.11
Rating:
Stock:
重量:
199
SKU:
107000194

Price War

acc
产品介绍

全金属Servoless 100度扭转ñ打开收回为88mm奥莱奥腿(套装F4-U,P-40等) - 固定翼模型重达3公斤优质servoless收回系统,功能全金属结构的精度,可靠性和耐用性,还具有自动切断保护,防止电流过大.......最后,空气和机械的可靠替代操作收回系统的机型!

重量:64克(各单位)
:45毫米点¯x13毫米
安装板:33毫米点¯x36毫米
工作电压:4.8V〜6V
工作电流:0.3A
支持的型号重量: 高达3公斤
端:4mm

包括2路连接导线

Product
Specifications

额外信息

  • 商品编号:
    107000194
  • Brand:
    Turnigy
  • 重量(g)
    199.00
  • 长度
    150.00
  • 宽:
    45.00
  • 高度:
    75.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
I modded my Durafly Curtiss P-40N with these
Quality
Value
Overall
Quality
Value
Overall
very good quality. Installed easy into my durafly 1100 corsair with a little dremel work. very happy i swapped out with this landing gear.
Quality
Value
Overall
Quality
Value
Overall
I agree with other reviewer! I bought these to fit A1 skyraider but they don't fit.
Oleo leg is not 88mm from axle to top as seen in picture, it is actually a fraction over 85mm. It is not easy to extend at all so I am looking for a pair of legs 95mm to match the retract unit. I'm still looking, I'll update if I find any. Nice unit though leg pin is small.
Quality
Value
Overall
Quality
Value
Overall
I purchased as replacements for my Durafly F4U Corsair (note: these are only around $10 more than the stock units, but appear a lot more durable). They arrived nicely packaged and include a y harness, although I'd say you'll also need an set extensions for just about all situations you want to install in. Now, the set that I received had an issue where the grub screws that hold the legs in line, where stripped. So, I started a claim to HK and in almost complete contradiction to all the complaints I see on these forums, HK where responsive and very helpful. AND instantly replaced the faulty units! Thank you HobbyKing,

I can not comment on the performance yet, but while they are not a straight swap for the Corsair units, there is not a lot of modification needed. I'll report back after a few flights.
Quality
Value
Overall
Quality
Value
Overall
Received 2 sets of theses retracts, to go into the HKing Durafly Skyraider, took a bit of work, but they went in, and YEEHAH...a rough landing wont result in bent or broken retracts, Thanks Hobbyking
Quality
Value
Overall
Quality
Value
Overall
These are very nice, BUT they do not fit the A1 sky raider 1600mm as I found out. I had read in the discussion that they were a perfect fit, not true for me. Wheels are to small, so if you want to use the ones that come with the plane you have to drill the leg and then find a pin or nut n bolt to hold the wheel. Also you have to extend the lower arm and top main arm if you use other wheels or they hit the wing, also you have to cut the wheel covers out to fit around the metal gear as it comes up when opening. And last you need to make sure you get a pair as I didn't and now I have to repostion the arm that twists the leg to the opposite side... Very good wheels just not a direct fit for the 1600mm A1 Sky raider!!
Quality
Value
Overall
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

acc

产品标签

使用空格分隔标签。使用单引号(')标注词组。