注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global
  • USA

Turnigy全金属Servoless 90度退刀瓦特/可操纵前端组件(6毫米引脚)

Turnigy全金属Servoless 90度退刀瓦特/可操纵前端组件(6毫米引脚)

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 160.19
Rating:
Stock:
重量:
465
SKU:
107000147

Price War

产品介绍

全金属Servoless收回集合W /可转向前端组件 - 高品质servoless收回系统大型模型重达15公斤,拥有全金属结构精度,可靠性和耐用性,还具有自动切断对电流过大的保护。

最后,空气和机械的可靠替代操作上比较大机型回缩系统!只需添加您所选择的含油腿。

引脚尺寸:6毫米
重量: 鼻单元(121克),翼单位(每117克)
最大型号重量:15公斤
工作电压:4.8V〜7.4V

包括3路连接导线。

请注意,这些单元是不可逆的。

Product
Specifications

额外信息

  • 商品编号:
    107000147
  • Brand:
    Turnigy
  • 重量(g)
    465.00
  • 长度
    100.00
  • 宽:
    55.00
  • 高度:
    95.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Found the problem the main cog coming from the motor is made of soft metal and the teeth are rounded and worn causing the gear box to slip.BS HK. What a waste of money
Quality
Value
Overall
Quality
Value
Overall
Totally pissed off had these in the draw for three years after checking them. Went to fit in plane and one will not lift the wheel the motor seems to be slipping. These are not cheap and i will not get a refund or replaced as I purchased them three years ago.
Quality
Value
Overall
Quality
Value
Overall
I have used 3 sets of these over the years. One set has over 100 flights on a 10kg turbine model without trouble. The 2nd set had one faulty unit that was replaced.
yesterday I received a new set and tested straight away. One mains opened and will not close. The nose unit operates sort of OK. Except the motor continues to run for several seconds when the unit retracts. Even very light finger pressure causes the jack screw to stop, the motor continues to turn until you remove the slight pressure when it finally retracts.
OBSERVATIONS. The motor gearbox on the current production is different than earlier units. The first ones had a unitary gearbox, these later ones have open gears enclosed in the main body of the unit. I believe the gears are slipping internally or are mis aligned,
Quality
Value
Overall
Quality
Value
Overall
Just received these retracts for my DHC-4 Caribou (about 20lb flying weight). Bad surprise: the nose retract does not work properly. It stops at half course. The motor seems to be defective. And now I will have th put a video on Youtube as proof the item is defective, fill out a form and wait for a replacement. This is a bummer.
Quality
Value
Overall
Quality
Value
Overall
Ich habe das System bei Hobbyking gekauft. Ein Fahrwerk fuhr nur mit starken Geruschen aus. Das Getriebe im inneren war nicht richtig zusammengeschraubt. Die Lagerbohrungen des Getriebes sind alle zu gro, so das sich starke Laufgerusche ergeben. Das Bugfahrwerk ist so gebaut, das ein direkter Austausch mit Beotec oder anderen bekannten Fahrwerken nicht ohne weiteres mglich ist. Man mus es tiefer setzen. Das ist in vielen Fllen aber nicht mglich. Dennoch: fr diesen Preis sucht man vergleichbares vergeblich. Und: bei 10Kg Modellgewicht und Graspiste ist das Limit wohl eher anzusetzen...
Quality
Value
Overall
Quality
Value
Overall
ottimo prodotto, la costruzione sembra buona - appena arrivati ho aggiunto il frenafiletti a tutte le viti in quanto lente.... funzionano egregiamente ed hanno un'ottima coppia.
Quality
Value
Overall
Quality
Value
Overall
These cycle smoothly and at a scale speed. They feel pretty solid. Probably best to drop the max weight they can handle by 25 or 30pcnt.
Quality
Value
Overall
Upload
Videos
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。