注册

Product Finder

设置

Useful links

 
[["US","AU","GB","DE"]]
注册
Shipped From:
  • Global
  • USA

Turnigy GliderDrive SK3系列大赛 - 3858 - 4.6 840kv

Turnigy GliderDrive SK3系列大赛 - 3858 - 4.6 840kv

QTY:

Now save 保存 AU$ 0.00 AU$ 0.00

AU$ 46.37
Rating:
Stock:
重量:
259
SKU:
9192000099

Price War

产品介绍

Turnigy SK3系列大赛电动机是最新加入到我们的SK3电机阵容,为在竞争层面模型中的绝对最好的质量,性能和效率。每SK3系列大赛电机彻底检查和测试,确保满足竞争飞行的要求所需的高效率和顶级的性能。

Turnigy GliderDrive系列大赛电机质量是一流的outrunners专为当今高性能滑翔机模型的使用而设计的。这些马达都是有效意味着电动机外部不旋转的“中的罐的外转子”。这种通过不不必担心间隙电机可旋转的外给你一个内转子的安装优势。还设有一个锥形前端,使他们能够融入轻松最滑翔机/ hotliners的纤细的鼻子。

我们指示我们的工程师今日源提供给他们最好的品质磁铁,轴承和材料,并制定马达,它不仅对手,但超越了许多领先的汽车制造商的质量在市场上。

其结果是一个高效率,高素质的电机采用优质双屏蔽轴承,烧结钕磁铁和一个字符串绕定子确保准确和一致的线圈每一次。

该Turnigy SK3电机适合谁正在寻求毫不妥协一个高质量的无刷电机建模。

该电动机被设计为在3〜5S前列电池运行并在10〜14英寸的直径的范围内摆动螺旋桨式滑翔机/ hotliners使用。

眼镜:
打开:10T
电压:3〜5S Lipoly
RPM / V:840kv
电机极数:14
内阻:0.031欧姆
最大负荷:45A
最大功率:830W
轴直径:5毫米
轴长度:20毫米
安装螺钉间距:25毫米(M3x4)
连接器:3.5毫米子弹
重量:180g

Product
Specifications

额外信息

  • 商品编号:
    9192000099
  • Brand:
    Turnigy
  • 重量(g)
    259.00
  • 长度
    110.00
  • 宽:
    50.00
  • 高度:
    80.00
  • 千伏(转/ v)的
    840.00
  • 最大电流( A)
    45.00
  • 功率(W):
    830.00
  • 长度B (毫米):
    58.00
  • 可以长深(mm )
    58.00
  • 最大电压(V)
    19.00
  • 轴(MM):
    5.00
  • Unit Weight (g):
    180
  • 直径C(毫米)
    38.00
  • 总长度E(毫米)
    82.00
  • 电阻( MH):
    0.00
Community
Discussions
Rate&
Review

撰写您自己的评测

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Very powerful motor. I use it in a 2 meter hotliner and it goes straight upward. Just a few seconds until the plane is out of sight, so be careful!
Setup is 12x8 folding prop, 80A ESC, 4S 3200mAh 30C battery.
Weight of plane including all components 1560g.
Climbing rate is about 30m/sec.

But you can’t compare it to a competition setup with a >1000 watts inrunner gearbox. This motor can’t compete with such a thing but keep in mind that it costs just a fraction of a pro-setup.

If you’re looking for a cheap and powerful motor for flying small fast gliders for fun, this is your weapon of choice!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
3meter 3kg F3B glider (Flower3) / 45er Adapter/ 13x8 aero-naut CAMCarbon = 61Amps 7seconds 100meter!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Super Motor :)

Bin total begeistert ist sehr hochwertig :)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have this motor in a 4M ALES glider 1940g with a 12X6 prop. Pulls 30A at 10.8V (3 cell) gives 7800rpm. I have it in a CLM Pro fuse that fits perfectly. Last year I ran it with a 3 Cell 1300mAh battery and was able to get to 150M easily in 30 sec. This year I will use a 4 cell and have practiced getting to 200M in 25 seconds repeatedly. It pushes the limits a bit at 41A and 14.8V with the 12X6 prop, but it's a 25 sec run. I might try it with an 11X8 prop, I hear that works pretty well.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These are very good and way cheaper than their MVVS equivalent. Best choice for an ALES or F5J glider up to 2.3 KG. This more brings my 2.2 KG Xplorer to 200 meters in 23 seconds and my 1.8 KG Gracia to 200 meters in 19 seconds.

Best battery for it: 4S 2200 ASPEC.

Best folding prop: 13 X 7
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have burnt out two of the these motors now. Both at partial throttle and both in the 5-7 minute flight time. They just get too hot. An outrunner in a can is not ideal for getting air through the motor
Running 60 Amp ESC turning a 13x6 folding prop.

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Der Motor wird mit eienr 14x8 Camfols Prop in eienr LS3 Multiplex eingesetzt . Betrieben mit einem 4500mah 3S Lipo mit 35C. Gewicht 3,6 Kg
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great little motor. installed in a BOT with a Graupner 13x7 folding prop powered by a 50A Aeolian ESC and 4S 3000mah battery (42A and 755W). on the plus side, easy to mount, don't have to worry about wires rubbing on the bell, good power. on the minus side, shaft a little too long (collets won't fit all the way), shaft is soft, and replacement shafts don't seem to be available.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very very good for F5f and F5j, good for hotliners,very smooth and extreme efficient
In 2.05m Alex by Nan.
4s 3200 65c 11x8 5deg hub 50A.
4s 3200 65c 10x8 5deg hub 60A.
5s 2600 65c 9x7 5deg hub 60A.
In 3.10m Graphite by Vladimir.
3s 2400 65c 13x11 2.5deg hub 60A.
Very good thrust for all cases.
Needs vendilated spiner.
Very high recomented six stars.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Klasse Motor Luft seidenweich. Fliege ihn in einem GL Speedy mit 13x8 prop. mit einem zippy compact 4 Zeller 2700 35c und 50 Amp Regler. Braucht 45 Amp. und ca 650 Watt.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
  • SK3 Glider Motor

  • Gliderdrive 840kv | YEP 60 amp ESC | Run-up w/ Meter

  • POWER Upgrades | On-board Meter | Animated Graphed Climbs

  • How to Program YEP 60 amp ESC w/ Programming Card for Gliderdrive 840KV

Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

产品标签

使用空格分隔标签。使用单引号(')标注词组。